• Journal of Korea Foundry Society
• /
• v.42 no.6
• /
• pp.337-346
• /
• 2022

In order to optimize the solution treatment conditions of Al-7Si-(0.3~0.5)Mg-(0~0.5)Cu alloys, a series of heat treatment experiments were conducted under various solution treatment times up to 7 hours at 545℃, followed by a microstructural analysis using optical microscopy, FE-SEM, and Brinell hardness measurements. Rapid coarsening of eutectic Si particles was observed in the alloys during the first 3 hours of solution treatment but the size of those Si particles did not change at longer solution treatment conditions. Meanwhile, the degree of spheroidisation of eutectic Si particles increased until the solution treatment time was increased up to 7 hours. Q-Al5Cu2Mg8Si6 andθ-Al2Cu were observed in as-cast Cu-containing Al alloys but the intermetallic compounds were dissolved completely after 3 hours of solution treatment at 545℃. Depending on the initial Mg composition of the Al alloys, π-Al8FeMg3Si either disappeared in the alloy with 0.3wt% of Mg content after 5 hours of solution treatment or remained in the alloy with 0.5wt% of Mg content after 7 hours of solution treatment time. Mg and Cu content in the primary-α phase of the Al alloys increased until the solution treatment time reached 5 hours, which was in accordance with the dissolution behavior of Mg or Cu-containing intermetallic compounds with respect to the solution treatment time. From the results of microstructural changes in the Al-7Si-Mg-Cu alloys during solution treatment, it was concluded that at least 5 hours of solution treatment at 545℃ is required to maximize the age hardening effect of the present Al alloys. The same optimal solution treatment conditions could also be derived from Brinell hardness values of the present Al-7Si-Mg-Cu alloys measured at different solution treatment conditions.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.491-501
• /
• 2022

Bentonite has been proposed as a buffer and backfill material for high-level radioactive waste repository. Under such repository environment conditions, bentonite is subjected to combined thermal, hydrological, mechanical, and chemical processes. This study evaluates the feasibility of applying X-ray CT technology on the characterization of bentonite under hydration conditions using a newly developed testing cell. The cylindrical cell is made of platic material, with a removable cap to place the sample, enabling to apply vertical pressure on the sample and to measure swelling pressure. The hydration test was carried out with a sample made of Gyeonju bentonite, with a dry density of 1.4 g/cm³, and a water content of 20%. The sample had a diameter of 27.5 mm and a height of 34 mm. During the test, water was injected at a constant pressure of 0.207 MPa, and lasted for 7 days. After one day of hydration, bentonite swelled and filled out the space inside the cell. Moreover, CT histograms showed how the hydration process induced an initial increase and later progressive decrease on the density of the sample. Detailed profiles of the mean CT value, CT standard deviation, and CT gradient provided more details on the hydration process of the sample and showed how the bottom and top regions exhibited a decrease on density while the middle region showed an increase, especially during the first two days of hydration. Later, the differences in CT values with respect to the initial state decreased, and were small at the end of testing. The formation and later reduction of cracks was also characterized through CT scanning.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.582-591
• /
• 2022

This study was conducted to eliminate Myocastor coypusMolina, 1782 (Nutria) from Jeju Special Self-Governing Province, South Korea. Habitat identification and eradication were carried out from September to November 2013, and a survey was carried out until June 2022 to check whether the eradication was successful. The habitat was identified with unmanned cameras, interviews, and literature surveys, and the capture was performed using the trapping method with food to attract nutria to the habitat area. The study area for the follow-up survey, which was set relatively wide considering nutria's home range, included wetlands and rivers within 4.0 km² of the habitat area (eradication area). As a result, nutria's habitat was confirmed only at Songdang Ranch, Songdang-ri, of Jeju Island, with traces of habitat (footprints, excrement, and burrows) confirmed in waterways and ponds within the pasture. Eight individuals were captured, including four females, three males, and one individual in too advanced a state of decay to identify the sex. The follow-up survey thoroughly investigated the habitat and its surroundings, focusing on three areas with permanent water, Seongeup Reservoir, Cheonmi Creek, and Molsuni Pond, but no signs of habitat were identified. Therefore, it is determined that nutria inhabiting Jeju Island has been completely eradicated. It is believed that the successful eradication of nutria in the Jeju Special Autonomous Region was possible due to a synergy between 1) the eradication of nutria at the beginning of the settlement phase through rapid capture after confirming the nutria habitat and 2) the delayed expansion period because of rare presence of wetlands, where water is constantly stagnant, on Jeju Island. These results imply that quickly identifying the ecological characteristics of the species and preventing disturbances before they or at the beginning of the ecological disturbance through control and eradication at the initial stage of settlement before the expansion stage is an effective measure to cope with the influx of alien species.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.639-650
• /
• 2022

Abeliophyllum distichum Nakai, a rare plant with distylous characteristics, is native to certain parts of the Korean Peninsula. It is registered on the IUCN Red List of Threatened Species as a globally endangered plant. This study was conducted to establish an appropriate local conservation management plan suitable for future A. distichum populations by comparing and analyzing the flowering characteristics and population size according to distyly based on the results of quantitative surveys in 14 regions, including 8 areas with native populations of A. distichum and 6 natural monument populations. The number of individuals appearing in each population group was surveyed, and the flowering individuals were identified by style as being either pin or thrum flower types as they were being examined and recorded on the site. In total, 13,130 individuals of A. distichum (7,003 flowering and 6,127 non-flowering individuals) were recorded, but the balance of the number of pin- and thrum-flowered individuals in each population was not significant (p<0.05), indicating an imbalanced state. In particular, the Yeongdong (YD) population was very disproportionate compared to other populations, suggesting that its genetic diversity was low and the possibility of inbreeding was high. The average flowering and fruiting rates by management unit were much higher in the natural monument populations (89.2% and 55.3%, respectively) than in the natural habitat populations (39.0% and 8.5%, respectively). It may be due to a difference in reproductive growth resulting from light inflow into the forest caused by the upper crown closure. The area of occupation (AOO) of A. distichum on the Korean Peninsula covered an area of 23,224.5 m². Although the natural monument population was smaller than the natural habitat population, its density was higher, likely as a result of the periodic management of natural monument populations, where the installation of protective facilities in certain areas restricts population spread. Conservation of A. distichum populations requires removing the natural monument populations suspected of anthropogenic and genetic disturbances and expanding the conservation priority population by designating new protected areas. Although the habitats of natural monument populations are managed by the Cultural Heritage Administration and local governments, there are no agencies that are responsible for managing natural habitat populations. Therefore, institutional improvement in the overall management of A. distichum should be prioritized.

• Journal of Internet Computing and Services
• /
• v.24 no.2
• /
• pp.19-26
• /
• 2023

Humans have adapted and evolved to natural light. However, as humans stay in indoor longer in modern times, the problem of biorhythm disturbance has been induced. To solve this problem, research is being conducted on lighting that reproduces the correlated color temperature(CCT) of natural light that varies from sunrise to sunset. In order to reproduce the CCT of natural light, multiple LED light sources with different CCTs are used to produce lighting, and then a control index DB is constructed by measuring and collecting the light characteristics of the combination of input currents for each light source in hundreds to thousands of steps, and then using it to control the lighting through the light characteristic matching method. The problem with this control method is that the more detailed the steps of the combination of input currents, the more time and economic costs are incurred. In this paper, an LED lighting control method that applies interpolation and combination calculation based on the minimum spectral power distribution information for each light source is proposed to reproduce the CCT of natural light. First, five minimum SPD information for each channel was measured and collected for the LED lighting, which consisted of light source channels with different CCTs and implemented input current control function of a 256-steps for each channel. Interpolation calculation was performed to generate SPD of 256 steps for each channel for the minimum SPD information, and SPD for all control combinations of LED lighting was generated through combination calculation of SPD for each channel. Illuminance and CCT were calculated through the generated SPD, a control index DB was constructed, and the CCT of natural light was reproduced through a matching technique. In the performance evaluation, the CCT for natural light was provided within the range of an average error rate of 0.18% while meeting the recommended indoor illumination standard.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.627-638
• /
• 2022

This study was conducted at a village fishing farm on 4 peaks on the main island of Jeju Island and 2 peaks on an inhabited island to compare the distribution characteristics of seaweeds along the coast of Jeju Island from May to December 2018. A total of 101 species of seaweeds were surveyed, including 13 species (12.9%) of green algae, 24 species (23.8%) of Phaeophyta, and 64 species (63.4%) of Rhodophyta. The largest number of seaweeds appeared in May and the fewest in October, showing typical features of a temperate sea area. The number of seaweed species that appeared was 66 and 65 species at the water depths of 5 m and 8 m, respectively, and the largest was 74 species at 12 m. The number of seaweeds that appeared by area was the largest at 66 species on Udo Island, an eastern island near Jeju Island, and the lowest at 27 species in Pyoseon-ri, an eastern part of Jeju Island. The important values of emerging species were high in the order of, Ecklonia cavaand Corallina crassissima at 21.1% and 20.3%, respectively, Corallina aberransat 9.2%, Amphora ephedraeaat 6.2%, and Sargassum macrocarpumat 4.4%. Among seaweeds, an average of 11.2 species of coralline algae appeared, and the mean importance value was 32.6% in the sear area. The lowest importance value was 14.7% on Udo Island, and the highest was 41.0% in Pyoseon-ri. The mean ecological evaluation index (EEI) of seaweed colonies ranged from 2.1 to 10. It was the lowest at the water depth of 12 m in Pyoseon-ri in May and June and was 7.3 or higher in other areas, indicating good condition. This study rated the standardized ecological grade I for the water depth of 12 m on Udo Island and grade II for the water depths of 5 m and 8 m in Sagye-ri and on Chujado Island. Grade III was the water depth of 5 m and 12 m in Pyoseon-ri and Guideok 2-ri and the water depth of 5 m and 8 m in Pyeongdae-ri, and grade IV was the water depth of 8 m in Guideok 2-ri.

• Journal of Environmental Impact Assessment
• /
• v.32 no.2
• /
• pp.134-145
• /
• 2023

Currently, the floodplains of major rivers are transforming into various types of waterfront spaces according to the increase in leisure activities and improved accessibility. In general, waterfront activities in river channels tend to be concentrated in summer, and the waterfront activities during this period directly affect water quality. Accordingly, it is necessary to accurately compare and evaluate the characteristics and water quality of waterfront activities during the period when waterfront activities are concentrated. In this study, the following research was conducted to compare and analyze the current status of waterfront activities of users of waterfront areas and the water quality of waterfront areas. First, three waterfront areas were selected for investigation using the information from the Ministry of Environment's water quality measurement network. Second, a survey was conducted on the satisfaction and types of waterfront activities targeting users of waterfront areas. Third, water quality grades were calculated based on monthly water quality measurement factors and compared. Fourth, statistical analysis (one-way analysis of variance) was conducted to see if there was a significant difference in water quality characteristics between periods of high waterfront activity and periods of low waterfront activity using water quality measurement data for the last 5 years. As a result of this analysis, the following conclusions were drawn in this study. First, the use of waterfront activities was investigated in the order of camping, water skiing, fishing, swimming, and rafting. Second, satisfaction factors for waterfront activities were investigated in the order of activity convenience, water quality, waterlandscape, transportation access convenience, and temperature. Third, it was found that satisfaction with water quality in waterfront areas was generally unsatisfactory regardless of the water quality grade presented by the competent authority. Fourth, as a result of comparing the water quality measurement network data of the Ministry of Environment by water quality grade, generally good grades were found, and in particular, there was a difference in grade frequency by season in the BOD category. Fifth, as a result of statistical analysis (one-way ANOVA) of water quality monitoring network data by season, there were statistically significant differences in COD, BOD, TP, and TOC except for DO. Considering the results of these studies, it is judged that it is necessary to prepare a comprehensive management system for water quality improvement in the waterfront zone and to improve water quality during periods of high waterfront activity, and to prepare a water quality forecasting system for waterfront areas in the future.

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.62-81
• /
• 2023

The purpose of this study is to propose policies to improve and revitalize rural bus services in Jeollabuk-do in the future by identifying the factors that affect service satisfaction and policy satisfaction and the relationship between them, targeting rural bus users in 4 cities and counties in Jeollabuk-do. In the four cities and counties in the study area, the number of rural bus users is continuously decreasing, and various transportation policies, such as unification of bus fares and demand-response transportation, are being piloted to promote bus use. In this study, three major service quality factors that affect rural bus service satisfaction and policy satisfaction were derived after a literature review. Modifying the research model presented in previous studies, we have presented a research model to verify the relationship between the three factors affecting service satisfaction and policy satisfaction, and the relationship between service satisfaction and policy satisfaction. For the verification of the research model, a total of 520 survey data collected from passengers near bus stops and bus terminals in four cities and counties, Gochang, Gimje, Buan, and Jeongeup, were used. As a result of the verification, it was found that the three factors of economic feasibility, convenience, and safety had a statistically positive (+) effect on service satisfaction, but only convenience and safety had a positive (+) effect on policy satisfaction. Contrary to the research hypothesis, it was found that there was no statistically significant relationship between service satisfaction and policy satisfaction. Although the result is different from the research hypothesis, it was a meaningful result that can make policy suggestions on the improvement of the unified fare system policy, service satisfaction, and policy satisfaction to Jeollabuk-do rural bus transportation policy makers and working-level officers. In conclusion, based on the results of research analysis, the unified fare system, and transportation policy, measures to improve service satisfaction and policy satisfaction were presented.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.63-75
• /
• 2023

Due to the development of industry, interest in air pollutants has increased. Air pollutants have affected various fields such as environmental pollution and global warming. Among them, environmental diseases are one of the fields affected by air pollutants. Air pollutants can affect the human body's skin or respiratory tract due to their small molecular size. As a result, various studies on air pollutants and environmental diseases have been conducted. Asthma, part of an environmental disease, can be life-threatening if symptoms worsen and cause asthma attacks, and in the case of adult asthma, it is difficult to cure once it occurs. Factors that worsen asthma include particulate matter and air pollution. Asthma is an increasing prevalence worldwide. In this paper, we study how air pollutants correlate with the number of emergency room admissions in asthma patients and predict the number of future asthma emergency patients using highly correlated air pollutants. Air pollutants used concentrations of five pollutants: sulfur dioxide(SO₂), carbon monoxide(CO), ozone(O₃), nitrogen dioxide(NO₂), and fine dust(PM₁₀), and environmental diseases used data on the number of hospitalizations of asthma patients in the emergency room. Data on the number of emergency patients of air pollutants and asthma were used for a total of 5 years from January 1, 2013 to December 31, 2017. The model made predictions using two models, Informer and LTSF-Linear, and performance indicators of MAE, MAPE, and RMSE were used to measure the performance of the model. The results were compared by making predictions for both cases including and not including the number of emergency patients. This paper presents air pollutants that improve the model's performance in predicting the number of asthma emergency patients using Informer and LTSF-Linear models.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.10
• /
• pp.47-56
• /
• 2007

In this research, the effects of the gravel content on the liquefaction behavior for both of the isotropically and $K_0-anisotropically$ consolidated gravel-sand mixtures are investigated. for this purpose, the cyclic triaxial tests for the specimens with the same relative density (Dr=40%) and variations of gravel content were performed. On the other hand, a series of undrained cyclic triaxial tests were carried out on the isotropically consolidated gravel-sand mixtures with the same void ratio (e=0.7) and from 0% to 30% gravel contents. Void ratios of gravel-sand mixtures with the same relative density (Dr=40%) are found to decrease significantly with the increase of the gravel content from 0% to about 70% and increase thereafter. But the void ratio of the sand matrix among the gravel skeleton increases with the increase of the gravel contents. Test results are as follows : for the isotropically consolidated specimen with 40% of relative density and low gavel contents (GC=0%, 20%, 40%), pore water pressure development and axial strain behavior during undrained cyclic loading show similar behavior to those of the loose sand because of high void ratio, and the specimens with high gravel content (70%) both pore pressure and strata behaviors are similar to those of dense sand. And the isotropically consolidated specimens with the same void ratio (e=0.7) and higher gravel contents show the same behavior of pore water pressure and axial strain as that of the loose sand, but for the lower gravel content this behavior shows similar behavior to that of dense sand. The liquefaction strength of the isotropically consolidated specimens with the same relative density increases with gravel content up to 70%, and the strength decreases with the increase of the gravel content at the same void ratio. Thus, it is confirmed that the liquefaction strength of the gravel-sand mixtures depends both on relative density and void ratio of the whole mixture rather than the relative density of the sand matrix filled among gravels. On the other hand, the behavior of pore water pressure and axial strain for the $K_0-anisotropically$ consolidated gravel-sand mixtures shows almost the same cyclic behavior of the sand with no stress reversal even with some stress reversal of the cyclic loading. Namely, even the stress reversal of about 10% of cyclic stress amplitude, the permanent strain with small cyclic strain increases rapidly with the number of cycles, and the initial liquefaction does not occur always with less than maximum pore water pressure ratio of 1.0. The liquefaction resistance increases with the gravel contents between 0% and 40%, but tends to decrease beyond 40% of gravel content. In conclusion, the cyclic behavior of gravel-sand mixtures depends on factors such as gravel content, void ratio, relative density and consolidation condition.