• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.380-385
• /
• 2014

Spherical atomizing reduction steel slag was prepared by atomizing technology using reduction steel slag (ladle furnace slag, LFS) generated from steel industry. In order to develop the mass-recycling technology of atomizing reduction steel slag, polymer concrete composite was prepared using spherical atomizing reduction steel slag instead of fine aggregate (river sand) and coarse aggregate (crushed aggregate), depending on the grain size. Different polymer concrete specimens were prepared with the various proportions of polymer binder and replacement ratios of atomizing reduction steel slag in order to investigate the characteristics of polymer concrete composite. Results showed that compressive strengths of polymer concrete specimens decreased with the increase of replacement ratios of atomizing reduction steel slag, but flexural strengths of the specimens showed a maximum strength at the 50% of replacement ratios of atomizing reduction steel slag. It was concluded that addition ratio of polymer binder, which affect greatly on the prime cost of production of polymer concrete, could be reduced by maximum 18.2 vol% because the workability of the polymer concrete was remarkably improved by using the atomizing reduction steel slag. However, further study is required because the mechanical strength of the specimen using atomizing reduction steel slag was greatly reduced in hot water resistance test.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.64-86
• /
• 1994

The authors have transplanted periodontally involved roots which had been root planed into healthy and periodontally involved extraction sockets, and studied the root resorption patterns as well as its effect on new bone formation and wound healing. Alveolar bone around mandibular premolars of 6 adult dogs has been surgically removed, followed by ligation of orthodontic elastic wires for 8 weeks inducing chronic periodontal disease. After removing the crown portions, roots were extracted, and notches were made on the root surfaces discriminating healthy and periodontally involved areas using burs. Controls and experimental groups were divided as follows. Control I : Transplantation of periodontally involved root into healthy extraction sockets. Control II : Transplantation of periodontally involved root into diseased extraction sockets. Experimental group I : Transplantation of root planed roots into healthy extraction sockets. Experimental group II : Transplantation of root planed roots into diseased extraction sockets. Extraction sockets were sutured after transplantations, completely submerging the roots. Healing progress was histologically observed at 2nd, 8th, 12th, and 20th weeks, and the results were as follows ; 1. No inflammation or infection within the extraction sockets had been observed in all groups throughout the experimental period. 2. Reversal lines were observed at week 2 in all groups, clearly discriminating socket walls and new bone, and numerous blood vessels were observed in the new bone trabeculae. 3. Experimental groups showed markedly less root resorption compared to the controls at week 2, but as time progressed, severe resorptions were present in all groups. 4. Localized areas of new bone ankylosis were observed, and the rest of the areas showed collagen fiber insertion with new bone formation at its periphery. 5. No clear differences were found in healing and alveolar bone regeneration between healthy and diseased extraction sockets. 6. The amount of root resorption and ankylosis had increased up to week 8 and 12, showing ankylosis of new bone and the roots. However, no further increase in ankylosis was observed at week 20. 7. Most of the cementum on healthy roots was directly ankylosed to new bone at week, 2, and were gradually resorbed and replaced by new bone thereafter. These results appear to indicate that root planing may inhibit early root resorption of transplanted roots, but gradual replacement by alveolar bone and collagen fibers eventually occur. Condition of the roots or presence of disease in extraction sockets do not appear to make marked differences in alveolar bone regeneration process.

• Journal of Technologic Dentistry
• /
• v.39 no.3
• /
• pp.179-185
• /
• 2017

Purpose: It is intended to raise awareness of importance of protective equipment and necessity of safety education by examining the actual condition of measures to deal with accident, occurrence of injury, whether safety education is received or not, the actual condition of wearing protective equipment, and working environment of dental lab and dental technician. Methods: A self-administered survey was conducted for a total of 150 dental technologists. A chi-squared test and independent-samples t-test was carried out by using SPSS WIN Program (version 12.0) in order to analyze the actual condition of safety education according to work experience and position and whether injury occurred according to whether to wear protective equipment. Significance level was 0.05. Results: With regard to whether injury occurred according to whether safety education was received, there was 'receiving the safety education-injured (71.8%)', 'not receiving the safety education-injured (79.7%)', 'receiving the safety education-not injured (28.2%)', and 'not receiving the safety education-not injured (20.3%)'. The statistical results of injury occurrence according to safety education were not significant. With regard to whether to be injured according work experience, there was 'less than 10 years-injured (68.4%)', 'less than 10 years- not injured (31.6%)', '10 years or above-injured (89.1%)', and '10 years or above-not injured (10.9%)'. The statistical results of injury occurrence according to work experience were significant (p<0.001). Conclusion: Dental lab and specialized agencies should continue to be interested in periodic safety training, recommending wearing protective equipment and personal protective equipment support and so on.

• Applied Microscopy
• /
• v.37 no.3
• /
• pp.167-174
• /
• 2007

Heat shock protein (HSP) 70 functions as a molecular chaperon and reduces stress-induced denaturation and aggregation of intracellular proteins. Erythropoietin (EPO) plays an important role during acute renal failure repair process by rapidly correcting anemia and enhancing renal tubular regeneration. The purpose of this study was to examine the effect of EPO treatment on renal HSP70 expression. Male Sprague-Dawley rats were injected rHUEPO. Kidney were preserved by in vivo perfusion with paraformaldehyde-lysine-periodate (PLP) and processed for immunohistochemistry and electron microscopy. In control kidney, HSP70 was expressed in the cortex, outer medulla and inner medulla. Especially, HSP immunoreactiviy was mainly founded in descending thin limb of outer medulla and inner medullary collecting duct. In EPO treated kidney, HSP70 expression markedly increased in the descending thin limb of outer medulla and newly detected in cortical collecting duct. Electron microscopy showed the presence of HSP immunoreactivity on the intracelluar vesicles and Golgi complex of descending thin limb and cortical collecting duct. These findings suggest that EPO treatment leads to new production of HSP70 in renal tubular cells, and induction of HSP70 by rHuEPO is causally related to protective function.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.119-130
• /
• 2011

On the point of data quality management, data quality is influenced by quality policy, quality organization, business process, and business rule. Business rules, guide of data manipulation, have effects on data quality directly. In case of building an integration database among distributed databases, defining business rule is more important because data integration needs to consider heterogeneous structure, code, and data standardization. Also data value has various figures depended on data type, unit, and transcription. Finally, database structure and data value problem have to be solved to improve data quality. For handling them, it is needed to draw database integration model and cleanse data in integrated database. NTIS(stands for National science and Technology Information Service) has an aim to serve users who need all information about national R&D by internet, and for that aim, it has a integrated database which has been made with several database sources. We prove that database integration model and data cleansing are needed to build a successful integrated database through NTIS case study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.744-750
• /
• 2015

In this paper, development of mobile robot for the inspection of hull surface was mentioned. In the sea, it is difficult to proceed with the visual inspection of hull side and thus mobile robot for checking the status could be run with strap-on its surface. To do this, permanent magnet module to generate magnetic force between hull surface and mobile robot, and structure to minimize variance of the force under curvature circumstance were considered on the design. Based on the design, mobile robot with four NdFeB, four driving wheels and image aquisition module was applied. Load experiment to check the adhesive force, slip test during stop state and driving test to measure driving speed were executed. From the experiments 13 Kgf adhesive force was obtained and slip was not happened until 8 Kgf load on the inclined plate. Driving speed of mobile robot was measured at 0.82 m/s corresponding to 6.5 ampere. We confirmed the effectiveness of developed mobile robot by experiments to check its characteristics.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.2
• /
• pp.179-186
• /
• 2017

Because facial asymmetry is caused by various causes, the cause analysis is important and quantitative index is needed to the evaluation. In this study, we applied the Nottingham Grading System that was used as a quantitative index to evaluate the facial paralysis by tracking the markers through the image processing and calculating the distance between the markers with images obtained by using the webcam, to evaluate facial asymmetry. The existing Nottingham Grading System has a problem of causing a measurement error in the specific case because the left and right are compared by summing the distance change between the feature points of the face part according to the change of the facial expression. We compared the case of the facial asymmetry and case of normal subject by using the existing Nottingham Grading System and the improved Nottingham grading system. In the existing Nottingham Grading System, case of facial asymmetry and case of facial symmetry were 99.0% and 95.0% respectively in the normal range, but the improved Nottingham Grading System showed facial asymmetry case was 74.0% and facial symmetrical case was 93.2%. The results of experiment show that the improved Nottingham Grading System allows detailed evaluation of each site and improved the problem of the Nottingham Grading System for specific cases.

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.261-266
• /
• 2008

The purpose of this study was to examine the effects of the toothpick method, one of professional toothbrushing methods, on the prevention of periodontal diseases and the satisfaction level of patients with that. The subjects in this study were 33 patients who included 16 men and 17 women. After the toothpick method was applied to the selected patients from January 9 to February 28, 2008, the collected data were analyzed with SPSS (Statistical Package for the Social Science) 12.0 program. The findings of the study were as follows: First, the patients investigated showed a 0.71 reduction in PI than in the past. The index of bleeding upon probing stood at 5.12, which dropped from 8.09 in the beginning. Second, the patients gave a mean of 4.20 to the professional toothbrushing out of possible five points, which showed that they expressed satisfaction with that. Third, as for the relationship between general characteristics and satisfaction level, the women were more satisfied with that ($4.25{\pm}0.33$). By age group, those who were in their 60s and up found that more satisfactory ($4.31{\pm}0.30$). Fourth, as to changes in oral symptoms by gender, the largest number of the men and women considered their gums to become healthier after the professional toothbrushing was applied. The above-mentioned findings suggested that dental institutions should be equipped with well-educated oral health care personnels who are responsible for the periodontal health of patients, and the development of oral health promotion programs is urgently required as well.

• Journal of dental hygiene science
• /
• v.15 no.1
• /
• pp.83-89
• /
• 2015

To investigate the necessity of periodontal treatments, and the association of the health lifestyle with periodontal treatments, the data of 11,488 adults targeted in the 5th (2010, 2012) National Health and Nutrition Examination Survey were used in this study. Chi-squared test was conducted to compare the subjects' general features with the health lifestyle of the patients who needed periodontal treatments. Logistic regression analyses were conducted to confirm the variables that could affect the necessity of periodontal treatments. As a result of verifying the necessity of periodontal treatments according to the general features and health lifestyle, the necessity decreased with the higher income level and education level, and in the cases of nonsmokers, frequent toothbrushing, and using oral hygiene products. When the subjects who did not had oral examinations, their necessity for periodontal treatments significantly increased (p<0.01). The variables that affected the necessity of periodontal treatments included residence, gender, education level, obesity, and oral examinations (p<0.01). Therefore, health lifestyle was thought an important variable that had affected the oral health status. Professional dental hygienists must provide people with action programs of health lifestyle to promote the national oral health status.

• Journal of Korean Medicine for Obesity Research
• /
• v.4 no.1
• /
• pp.45-54
• /
• 2004

Objective: To evaluate the effect of Ephedra Sinica and Evodia Rutaecarpa on resting metabolic rate(RMR), weight and body composition in obese women during low-calorie diet. Methods: We recruited 90 healthy premenopausal women$(body\;mass\;index{\geq}25kg/m^2)$ and randomly assigned to three groups(ephedra group, evodia group and placebo group). Subjects were administered Ephedra Sinica(6g twice a day) or Evodia Rutaecarpa(6g twice a day) or placebo in a double-blind fashion and participated in low-calorie diet for 8 weeks. Resting metabolic rate and body composition were measured at baseline, 4 and 8 weeks. Results: RMR change for 4 weeks was significantly higher in the ephedra group compared with the placebo group(p<.05). But the change for 8 weeks was not significant and the Evodia group showed no significant RMR change. Weight and percent body fat changes for 4 weeks and 8 weeks were significantly higher than the placebo group in the ephedra group(p<.05), but the Evodia group didn't show significant level. Conclusions: This study supports and emphasizes the benefits of herbal medicine in maintaining or increasing RMR during low-calorie diet. Especially Ephedra treatment was effective on significant maintainment of RMR, loss of weight and percent body fat(P<.05).