• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.144-151
• /
• 2011

Recent years have witnessed speed up of moving vehicles such as high-speed of trains. Increase in speed entails concomitant increase in turbulent air flow which contributes toward aerodynamic noise. The proposed method for aerodynamic noise reduction is based on a biomimetic design of owl feather. The five morphological parameters of the owl feather is extracted from close observation, and simulation cases are constructed by applying design of experiments methodology. Swirling strength for each case is obtained through steady-state CFD analysis, and key morphological parameters that affect the turbulence are identified. Large eddy simulations (LES) are then performed on selected cases to predict the air turbulence. Different cases show varying vorticity distribution levels which is expected to lead to varying aerodynamic noise levels.

• Journal of the Korean Society of Visualization
• /
• v.11 no.1
• /
• pp.22-27
• /
• 2013

An investigation into the influence of ultrasonic standing wave on the structural behavior of propane/air premixed flame has been made to get a clue to the combustion reaction acceleration and combustion instability. Visualization technique utilizing the Schlieren photography was employed for the observation of structural variation of the flame reaction zone. Evolutionary characteristics of the flame front were caught by the high-speed Schlieren image, through which local flame velocity of the moving front were analyzed in detail.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.183-188
• /
• 2003

This study is to make the fundamentals of sound quality evaluation in regard of acoustical characteristics of passenger compartment. The deviation of frequency response function level within audible frequency is evaluated at receiving point in the research of room acoustics. In this study, frequency response function is the one between speaker and driver's ear positions. The positions of driver and audio speakers are optimized by analysis of acoustic mode of acoustic cavity. The main reflection planes are determined by analysis sound ray path diffused at optimized speaker positions. Finally, designer selects acoustical material by analysis of absorption effect of acoustical materials on the main reflection planes in order to avoid to distortion and fluctuation of frequency response function..

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1081-1085
• /
• 2002

A modeling is developed to predict the isolation performance of sound barrier systems under the sound pressure radiated from excited by point impact. The predicted results are compared with the measured results obtained by using APAMAT II. This instrument provides a combination of structure-borne noise and air-borne noise, which corresponds to rolling noise, by applying the excitation system projected steel balls against the steel sheet.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.949-954
• /
• 2000

Applicability of the vibration signal phase for predicting the modal damping properties of structures is investigated. For uniform plates with different internal damping levels, the phase delay as a function of the frequency span as well as a function of the distance between the excitation and response measurement points are experimentally obtained. Dependence of the phase characteristics on the amount of structural damping is elucidated -more heavily damped plate shows notably reduced phase delay at intermediate distances. The experimental results compare favorably with analytical predictions, and show much promise for further refinement as a tool for estimating structural properties.

• Journal of the Korean Society of Visualization
• /
• v.5 no.2
• /
• pp.3-8
• /
• 2007

Yellow dust problem is one of serious environmental problems in East Asia. The earth's abnormal climate changes and rapid industrializations over the mainland China seem to make the matter worse than ever before. In order to solve the yellow dust problem, collaborative works are necessary not only in the fields of meteorology and engineering, and but also through national consistent policies beyond the nations. In this regards, reporting on current policies of our meteorological administrative on the yellow dust problem can be regarded as valuable services for the engineers working in the fields of energy and environments.

• Journal of the Korean Society of Visualization
• /
• v.5 no.2
• /
• pp.20-25
• /
• 2007

The geometry of a commercial passenger airplane is realized based on a Boeing 747-400 model through the photographic scanning and reverse engineering. The each element consisting of the plane such as fuselage, wing, vertical fin, stabilizer and engines, is individually generated and then the whole body is assembled by the photomodeler. The maximum error in the realized airplane is about 1.4% comparing with the real one. The three-dimensional inviscid steady compressible governing equations are solved in the unstructured tetrahedron grid system, and in a finite volume method using STAR-CD when the airplane flies at the cruise condition. The pressure distribution on the surface and the wing-tip vortices are visualized, and in addition to the aerodynamics coefficients, lift and drag are estimated.

• Journal of the Korean Society of Visualization
• /
• v.5 no.2
• /
• pp.56-63
• /
• 2007

Flow visualization and aerodynamic characteristics of delta wings with two different leading edge geometries are investigated by PIV system and wind tunnel balance when the Reynolds number is about based on the freestream velocity and the root chord length. Delta wing models have 65-deg swept angle, and the leading edge shapes are divided into round- and sharp- type. The experimental results indicated that the leading-edge vortex strength and aerodynamic coefficient in the round leading edge are stronger and more, respectively than those in the sharp one. Therefore the flow interactions between vortices and the boundary layer are more desirable or more rapidly swirled in the round-type leading edge.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.537-541
• /
• 2007

관거시설의 맨홀에서 수두손실이 과대해지면 관거의 통수능력이 저하되어 배수구역의 침수피해가 발생되고, 우수의 분출 시 맨홀 뚜껑이 유실되어 인명사고를 유발할 수도 있다. 특히 1990년대부터 국지성 집중호우에 의한 도심지역의 침수피해가 빈번히 발생하고 있는 현실을 감안할 때, 관거시설 내 맨홀에서의 수리적 에너지 손실에 대한 연구와 보다 구체적인 설계 기준의 제시가 요구되고 있는 실정이다. 이러한 점을 고려할 때, 도시지역의 우수관거 시스템의 우수 배제 능력을 증가시켜 도심지의 침수를 방지하기 위한 관거시설의 적정 설계 기준이 필요하며, 합리적인 설계 기준을 제시하기 위하여 맨홀 내에서의 수두 손실을 분석할 필요가 있다. 그러므로 본 연구에서는 일반적으로 설치되어 있는 직사각형 맨홀의 현장조사와 설계기준을 조사하여 수리 실험 장치를 제작하였다. 선정된 실험조건인 맨홀의 내부형상 변화와 하수도 시설기준상의 맨홀 내의 단차규정에 따른 수리실험을 실시하여 맨홀 내부의 흐름특성의 변화와 에너지 손실에 대하여 분석하였다. 또한 실험조건 변화에 따른 수두 손실계수를 산정하여 직사각형 맨홀 내부의 에너지 손실을 감소시키기 위한 방안을 제시하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.820-824
• /
• 2007

간선도로의 유입부 설계에는 도로 표면에 떨어진 강우만을 고려하여 빗물받이 간격, 형태 등을 결정하고 있으나, 현실적으로는 간선도로와 연결된 급경사 국지도로에서 횡방향 빗물받이 유입부로 유입되지 않는 유량이 간선도로의 침수를 가중시키고 있는 실정이다. 이러한 점들을 고려할 때, 침수피해에 의한 시민들의 재산을 보호하고, 불편을 덜어주기 위해 급경사 국지도로의 합리적인 배수시설이 필요하다. 그러므로 국지도로 조건에 따른 횡유입부의 설치간격, 적정크기 및 관리 방안을 마련하여 빗물 배제 능력을 향상시킴으로써 도시 홍수피해의 경감대책을 수립하여야 한다. 따라서 본 연구에서는 합리식을 이용하여 우수유출량을 계산하고, 횡유입부의 차집효율 실험을 통하여 산정된 국지도로의 단위 폭(1m)당 차집유량을 이용하여 횡유입부의 설계 방법을 제시하였으며, Excel을 이용하여 간략하게 프로그램화 하였다. 제시된 설계방법은 실무에서 국지도로 경사의 변화를 고려한 횡방향부의 설계에 사용가능하리라 판단된다.