• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.220-222
• /
• 2001

This paper describes the optimizing method of direct load control (DLC) considering unit commitment which is based on dynamic programming. To consider the unit commitment on DLC, 3-Dimensional dynamic programming as a new unit commitment method is developed. And, this method is applied to DLC. As a result, optimization of operating schedule with DLC is possible. This method is applied to the test system, and usefulness of the method is verified.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.19-21
• /
• 2002

This paper presents a power transfer capability calculation algorithm Considering Voltage Stability Margin. In this method, voltage stability margin constraints are incorporated into a power transfer capability formulation to guarantee adequate voltage security levels in interconnected Power System. The proposed method is applied to IEEE-24 Reliability Test Systems and the results shows the effectiveness of the method.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1111-1113
• /
• 1999

This paper presents a algorism for evaluating contingency case power wheeling effects using Monte-Carlo simulation The effects of wheeling on generating cost, transmission losses, and system security are considered. For a specific operating condition, the effects are quantified by the sensitivity of specific quantities of interest with respect to wheeling level. This model is utilized within a Monte-Carlo simulation to calculate probability distribution functions of the incremental effects of wheeling on operating cost, transmission losses, and system security. The model and solution methods are applied on a IEEE RTS-96 system power system and the results are presented.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.93-95
• /
• 1992

A planner have to consider many uncertain factors in best generation mix problem. To solve those problems, fuzzy theory is applied in this paper. Using fuzzy measure and Sugeno's fuzzy integral, the planner can choose the best alternative. By applying the proposed algorithm to KEPCO data, the validity of the proposed method is verified.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.609-617
• /
• 2003

The use of Shotcrete(Sprayed concrete) for the support of underground excavations was pioneered by the Civil engineering industry. Permanent shotcrete tunnel linings such as Single-shell, NMT(Norwegian Method of Tunnelling) have been constructed in many countries for reducing construction time and lowering construction costs instead of conventional in-situ concrete linings. Among essential technologies for successful application of Permanent Shotcrete Linings, high performance shotcrete having high strength, high durability, better pumpability has to be developed in advance. This paper presents the ideas and the first field test results of wet-mixed Steel Fiber Reinforced Shotcrete(SFRS) with powder types cement mineral accelerator. From the results, wet-mix SFRS with powdered accelerator exhibited good early strength improvement and less rebound ratio compared to the ordinary accelerator.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.113-116
• /
• 1995

In this study, we formulate production costing problem with environmental and operational constraints into an optimization problem of LP form. In the process of formulation, auxiliary constraints on which reflect unit loading order are constructed to reduce the size of optimization problem by economic operation rules. As a solution of the optimization problem in LP form, we use Karmarkar's method which performs much faster than simplex method in solving large scale LP problem. The proposed production costing algorithm is applied to IEEE Reliability Test System, and performs production simulation under environmental and operational constraints. Test and computer results are given to show the accuracy and usefulness of the proposed algorithm in the field of power system planning.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.496-497
• /
• 2008

This paper presents development of the long and mid term power expansion planing for distributed generation. This planing model reflect WADE Economic Model's advantage that special quality of DG(Decentralized Generation) and WASP Model's advantage that special quality of CG(Centralized Generation) each other. Through these synergy, we develop better the Plan of Long and Mid Term Distributed Generation then existent model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.117-123
• /
• 2005

Recently, harmonic problem affect a great effect on power system. Especially, Incheon International Airport is a very important place in view of safety and reliability of power. In this paper we measure the harmonics at incheon international airport, especially passenger terminal. With the results we analysis the results and propose the guideline of harmonic reduction method. To do this we compare various kinds of specification for harmonic restrictions.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.13 no.2
• /
• pp.41-49
• /
• 2011

양북터널은 굴착과 동시에 라이닝콘크리트를 타설하였다. 터널굴착과 라이닝콘크리트의 동시시공을 위한 적정시공 Cycle을 결정하고, 이에 따른 양생기간과 양생온도를 설정하는 순으로 시험하였다. 라이닝콘크리트는 품질관리를 위해 보온장치를 탑재한 Sliding form과 양생대차를 운영하고, 균열을 최소화하기 위해 양생온도와 양생시간 및 탈형강도 등을 시험에 의해 결정하였다. 시험과정은 터널내부와 라이닝콘크리트 내부온도를 계절별로 측정하고, 양생온도별로 콘크리트의 강도를 측정하였다. 거푸집 탈형시 콘크리트 온도가 터널내부의 온도로 수렴하기까지는 $15{\sim}20^{\circ}C$의 차이로 측정되었고, 거푸집 탈형을 위한 콘크리트 초기강도 4MPa을 발현하는데는 양생온도에 따라 차이가 발생하지만 시공 Cycle에 적합한 양생시간은 약 20시간이고, 이 때의 양생온도는 $23^{\circ}C$ 이상이었다. 위의 시험결과대로 현장에서 라이닝콘크리트를 양생한 결과 시공 Cycle과 압축강도 및 콘크리트면의 외관 등이 만족한 결과를 나타내었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.780-784
• /
• 2003

This parer propose a new method to calculate nodal price which is very useful data in electric market under non-optimal operation. To calculate nodal price, we employ marginal cost and power flow, and consider network loss, generator capability, and line capability. The proposed method is applied to the test system and the usefulness is verified.