• Title/Summary/Keyword: 김동인

Search Result 133, Processing Time 0.023 seconds

M-ary orthogonal CDMA Using Time Hopping Codes (시간도약부호를 사용하는 M진직교 부호분할 다원접속)

  • 김일규;김동인;노종선
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.7
    • /
    • pp.1374-1389
    • /
    • 1994
  • In this paper, a novel M-ary orthogonal CDMA scheme which utilizes time hopping codes and binary orthogonal sequences is proposed for personal communication system. Its modulated output signal has the characteristics of greater bandwidth occupancy and lower spectral density level as well. So this scheme is useful for spectrum overlay with existing narrowband communication systems which occupy current radio frequency channels. This paper investigates system characteristics through the analysis of modulated output signal power spectrum, and demonstrates the possibility of spectrum overlay.

  • PDF

Ananlysis of decorrelating detector in the presence of the residual MAI (잔여 다원접속간섭을 고려한 역상관 검출기의 성능분석)

  • 김동인
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.21 no.8
    • /
    • pp.2090-2098
    • /
    • 1996
  • This paper analyzes decorrelating detector for synchronous packet CDMA communications where a set of quasiorthogonal code waveforms are generated from a common code by assigning distinct initial code phases to all users. In this analysis, we characterize the residual multiple-access interference (MAI) caused by possibletiming offsets when synchronous and simultanceous packet transmissions are on the reverse link of centralize networks. Also, to show feasibility of decorrelating detector employing the common code, we further investigate its robustness against the multipath channel. It is demonstrated that the decorrelating detector greatly reduces the residual MAI to the order of N$^{-2}$ , N number of chips/bit, and yields significant performance gain compared to the single user detector.

  • PDF

Bit error probability and channel capacity in the return link of GLOBALSTAR-A CDMA LEO mobile satellite system (CDMA 방식의 저궤도 이동위성통신 시스템 GLOBALSTAR 역방향 링크의 비트오율 및 채널용량에 관한 연구)

  • 강형진;김동인
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.22 no.7
    • /
    • pp.1448-1458
    • /
    • 1997
  • In this paper the reverse link of the GLOBALSTAR-the representative CDMA LEO satellite system and LEO mobile satellite channel are developed by the SPW software simulation tool. And the performance of the system is evaluated. GLOBALSTAR is designed to give cellular-type service to hand-held user terminals through a constellation of 48 LEO satellites in circular orbites with 1414 Km altitude. Since LEO mobile satellite system communicates with mobile unit, it is suffered from severe multipath fading and shadowing. The fast mobility of LEO satellites makes the channel condition time vering. So, the LEO mobile satellite channel is different from land mobile channels. In this unique LEO satellite channel, it is shown that the performance of the GLOBALSTAR reverse link is varied according to the elevational angle, but this variation is overcome by satellite path diversity.

  • PDF

Extension of Script MIB for multiple Execution Environment management of Active Network node (액티브 네트워크 노드의 다중 수행환경 관리를 위한 Script MIB의 확장)

  • 김동인;손용식;이병기;조국현
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2000.10c
    • /
    • pp.189-191
    • /
    • 2000
  • 기존 네트워크의 정적인 구조와 그에 대한 사용자들의 요구가 충족되지 못하고, 시간이 지남에 따라 점점 늘어만 가는 네트워크 관리대상의 숫자는 액티브 네트워크와 Script MIB의 등장을 가져왔다. 사용자들이 직접 네트워크 서비스를 구성하고 설치, 이용할 수 있는 액티브 네트워크에 기존의 SNMP agent가 동적으로 생성된 관리정보를 관리자에게 돌려줄 수 있는 Script MIB를 결합하여, 액티브 네트워크가 가지고 있는 다중 수행환경을 관리하는 방법과 Script MIB를 보완하는 방법을 제시한다. 또한 결합에 사용되는 메시지의 구조와 전체적인 동작 과정을 예시함으로써, 이러한 결합 방법이 갖는 효율성을 나타낸다.

  • PDF

Lateral long term behavior of Driven H-Piles in Embankment (성토지반에 타입된 H 말뚝의 횡방향 장기지지거동)

  • 박영호;정경자;김주경;김동인
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2002.03a
    • /
    • pp.575-582
    • /
    • 2002
  • To find a lateral long term behavior of driven H-piles in embankment, inclinometer is installed at pile and measurement is done during a year. When behavior of measured slope angles is in accord with behavior of nonlinear p-y curves(Reese, Murchison and O'Neil, Matlock's p-y analysis), maximum displacement of pile head, maximum stresses and maximum bending of pile obtained from the numerical analysis are shown. As results, maximum lateral displacement at pile head, maximum stress and maximum bending moment of pile are shown linear behavior. And maximum lateral load, maximum lateral displacement, and maximum bending moment at pile head obtained from the numerical analysis are 8∼12.4tonf, 9∼10.1mm, and 10.39∼12.67tonf-m per pile according to the curves, respectively.

  • PDF

Analysis of Multicarrier DS/DPSK Systems with Single Tone Interference Rejection (단일톤 간섭제거를 위한 다단반송파 DS/DPSK 시스템의 성능분석)

  • 엄종선;김동인
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.22 no.4
    • /
    • pp.761-770
    • /
    • 1997
  • Narrowband signals can be treated like a single tone interference at the receiver which demodulates wideband signals spectrum overlaid at the same frequency band. In this paper, the single tone interference is effectively suppressed by the use of a multicarrier DPSK direct-sequence(DS) spread spectrum(SS) with maximal-ratio(MR) combining instead of notch filter, which is hard to implement. A noncoherent DPSK system is considered because it is more realizable and does not require any complicate phase tracking, compared with a single carrier system subject to a constraint system bandwidth, and their performance comparisons are validated through simulation. We also propose a suboptimal-ratio(SR) combining which yields uniform and tight low bound on the performance of the MR combining, and then system parameters re optimized by theoretically evaluating the low bound, since an exact analysis appears intractable.

  • PDF

CQ importance sampling technique for the rician fading channel (Rician 페이딩 채널에 대한 CQ Importance Sampling 기법)

  • 이대일;김동인;황인관
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.22 no.5
    • /
    • pp.1097-1106
    • /
    • 1997
  • Most works on importance sampling (IS) as an efficient evaluation technique havd been done in an additibe white gaussian noise channel (Awgn). In this paper we propose a CQ(conventional importance sampling and quasi-translantion) IS technique for the mobile radio channel modeled as Rician fading, and analyze the IS estimator's variance to determine optimum IS parameters and the minimum number of run times. Reference showed that CIS technique has a poor performance for systems with meories, but it is shown that the CIS technique can be improved by combining with quasi-translation technique even for systems with memories. Here the CQ IS technique modifies the variance of additive noise and also performs quasi-translation for the fading distribution. We determine the optimum IS parameters of the proposed CQ IS estimator and whow that the simulation gains are about 10$^{3}$~10$^{6}$ for the mobile communication systems with memories in case of the expected BERs 10$^{-5}$ ~10$^{-8}$ .

  • PDF

Development of Climbing Hydraulic Robot System's Synchronizing Controller for Construction Automation (시공자동화를 위한 크라이밍 유압로봇시스템의 동기제어 컨트롤러 개발)

  • Cho, Nam-Seok;Kim, Chang-Won;Kim, Dong-In;Lee, Kyu-Won;Cho, Hunhee;Kang, Kyung-In
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2011.05a
    • /
    • pp.167-169
    • /
    • 2011
  • Construction Automation as a way to solve the problems of lack of skilled labor by decrease in construction population productivity and quality decrease. We are on the way to develop a construction automation system adequate for domestic circumstances in Korea; it is called RCA(Robotic-crane based Construction Automation) system. Climbing hydraulic robot system is a part of RCA system and makes Construction Factory(CF) climb next floor. The controller can control movement needs to be developed for CF safety. Synchronous control the actual field was applied to the controller logic and synchronous control of the process through which the safety has been verified. The purpose of this study that control of climbing hydraulic robot system behavior on real-time, and to improve safety for overall construction automation system through synchronous motion controller.

  • PDF

The Properties of Hardened Slag by Alkali and Curing Method (알칼리 첨가 및 양생방법에 따른 슬래그 경화체의 특성)

  • 김원기;소정섭;배동인
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2002.10a
    • /
    • pp.27-32
    • /
    • 2002
  • In this research influences of type and concentration of alkali activator and curing condition on the hydration, and properties of alkali activated blast furnace slag(AAS) concrete were investigated. Sodium carbonate and sulfate were used as alkali activators and their concentration were 4~10 weight percent with Na$_2$O equivalent to binder. The curing conditions were standard curing using 23$^{\circ}C$ water and activated curing chamber at $65^{\circ}C$. Results show that in case of sodium carbonate addition high early strengths were gained by activation of early hydration, but later strength gained was slight. On the other side sodium sulfate strengths were continuously increased with adding amount and ages. Steam curing activated early hydration so that early strengths were improved but later strengths were similar to standard curing. The strength reduction of AAS mortar with sodium sulfate was less than OPC mortar in 5% sulfuric acid solution so that AAS concrete can be useful for acid-resistance concrete.

  • PDF

하나로 폐기물의 주요 처분원가 분석

  • Kim, Seong-Gi
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2010.05a
    • /
    • pp.171-172
    • /
    • 2010
  • 본 논문에서는 하나로폐기물을 처분 원가대상으로 설정하고 처분 단위모듈당 주요 원가를 추정하였다. 추정결과, 처분용기 직접재료비가 제일 많이 소요되며, 그 다음은 처분공 굴착비인 것으로 나타났다. 이러한 이유는 처분공 굴착은 발파공법이 아닌 그라인더로 굴착하는 정밀공법이기 때문에 굴착단가가 1,143,963원/$m^3$으로 매우 비싸기 때문이다. 따라서 주요 원가동인의 비용 점유율은 처분용기 재료비가 44.7%, 처분공 굴착비가 27%로 나타났다. 그리고 처분터널 굴착비는 비교적 비용 점유율이 적은 2.3%로 계산되었다. 이러한 이유는 처분터널은 처분공과 달리 발파기법으로 굴착하기 때문에 굴착단가가 처분공 굴착단가에 비해 저렴하기 때문이다.

  • PDF