• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.76-78
• /
• 2001

In this paper insulation cover that being used in distribution line have been evaluated for aging characteristics. For evaluating its aging properties, we dismounted a variety of samples, like insulation covers for termination of deadend clamp, bushing, LA, COS and sleeve, in the fields. we performed mechanical properties test, electrical test, weathering test, etc. of these samples. And these samples are compared with virgin sample. Test results shows the bad mechanical strength in some part of samples. Especially, Insulation covers for the bushing terminations have cracks in the surface of samples.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.772-774
• /
• 1997

Small-signal stability analysis of large power systems needs the calculation of eigenvalues. But we use the partial eigenanalysis to calculate rightmost eigenvalues, since system matrix is very large. This paper proposes the Arnoldi-Chebyshev method identifying rightmost eigenvalues. This method constructs an optimal ellipse containing unwanted eigenvalues and use the Chebyshev iteration to get approximate eigenvetors corresponding to wanted eigenvalues, and then applies the modified Arnoldi method to calculate wanted eigenvalues.

• 한국유가공학회:학술대회논문집
• /
• 2004.11a
• /
• pp.17-29
• /
• 2004

Nanofood can be simply defined as natural polymer particles containing functional food materials in nanoscale that are synthesized by polymerization or emulisification process. They have very uniform diameters in the range of 1 to 100 nm and extensive surface areas due to the small particle size in spite of their non-porosity. Although the technique to produce nanofood has not Bong developing history, many works have been achieved in various fields. Nanofood has a lot of special advantages, such as functionality, diversity, applicability, etc. In case of the domestic food industries, however, the accumulation of related technique is insufficient against developed countries except used food materials. Also, it is difficult to acquire technical know-how from the developed countries that possess those technologies. We have been studied on preparing functional nanofood and developing new production processes since 1999. Last 5 years we have laid the foundation on the preparation of nanofood and now are focusing on developing new processes of nanofood and expending the field of its applications.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.2
• /
• pp.167-172
• /
• 2011

A three-dimensional ecological model (EMT-3D) was applied to Tokyo Bay to simulate 4,4'-bis (2-sulfostyryl)biphenyl (DSBP). The simulated results were in good agreement with the observed values, with a correlation coefficient of R=0.8431 and a coefficient of determination of $R^2$=0.7108. The sensitivity analysis indicated that the photolysis rate is the most important factor. Therefore, the parameters must be considered carefully in modeling. The mass balance results showed that the standing stock of DSBP in water and in particulate organic carbon was 621.2 and 19.5 kg, respectively, and the effluent flux to the open sea was 2.63 and 0.055 kg/day, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.487-488
• /
• 2008

The dry and wet flashover characteristics on the contaminated distribution facilities was investigated. The test were carried out on the suspension insulator, line post insulator, lightning arrester, cut off switch, etc. In the dry state, the flashover voltages of facilities contaminated with B, C, D classes are similar to the non-contaminated ones. However, in the wet state, the flashover voltages of facilities contaminated with B, C, D classes are decreased. The flashover voltages of some few facilities show under the standard value. This results indicate that the high humidity may cause the flashover on distribution facilities.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.4
• /
• pp.182-189
• /
• 2001

In this paper, the distribution suspension porecelain insulators which had been used for long periods in the contaminated area were evaluated. The contaminated area is close to the sea and in the high density of industries. The heavily contaminated domestic and imported insulators were investigated by using electrical characteristics, such as power-frequency dry flashover voltage, power-frequency wet, flahover voltage, and leakage current. Also, these electrical results were compared with the contaminants on the surface. From these analysis, we found that the contamination from the industrial dust, only slightly decreased flashover voltage and increased leakage current. Therefore, the electrical properties of insulators used for 30 years in the area of coast and industrial complex were not much changed.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1548-1550
• /
• 2000

The effect of air pollution on the distribution facilities was investigated. In order to evaluate the pollution level in the metropolitan area, contaminated specimens were analyzed with various technique such as ICP-AES, EA, and so on. The contaminants on the surface of the distribution line or insulators were combined with approximately 10 percent of organic and 90 percent of inorganic materials. We found out that the electric facilities were affected by the contaminants on the surface of the facilities.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.565-567
• /
• 1995

Though he is a experienced expert, it takes much time and considerable effort to review this items in detail since the widespread terms to plan distribution system is considered. Therefore it needs software system for planning of distribution system to solve much time and human resoureces due to manipulate many data and calculate sophiscated technology. The object this study raises its availability by assisting distribution works such as load forecast, substation planning in ChangWon city based on CADPAD software package.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.671-675
• /
• 2005

In this paper, Development of propulsion system using IPM(Intelligent Power Module) for DC electric vehicle is proposed. Designed propulsion system is comprised of inverter stack which includes 6 IPM, BCH(Breaking Chopper) unit, FC(Filter Capacitor), Control unit. IPM can compose propulsion system simple by including gate drive circuit and protection circuit. Inverter stack is designed as a simple structure using IPM and non clamp capacitor. VVVF Inverter control is used the vector control strategy at low velocity region and slip frequency-control strategy at high velocity region. Designed propulsion system proves the performance through test and revenue service.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.589-597
• /
• 2000

This paper deals with the basic design of the traction motor(TM) by performing the train performance simulation(TPS). The TPS, considering min condition, provides some important information about selecting the latins of TM such as current, power and frequency, etc. Especially, calculating the current flowing into the TM by the TPS in the situation of normal condition and M-car cut out respectively, we can inspect whether the TM endures thermally under the contingency or not. This paper reviews the tractive effort of the train to meet the demands of consumer and then designs the TM electrically. finally, performing the TPS under emergency condition, it checks the thermal capacity of the TM to insure the justice of the TM under construction.