• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.1
• /
• pp.49-54
• /
• 2011

In order to develop the methods for exposure assessment and find susceptibility markers for the workers who are exposed to low doses of toluene, xylene and other chemical in petroleum industries, we investigated the application of P-450 expression in human lymphocytes utilizing mouse monoclonal anti-rat CYP2B1/2, the levels of toluene and xylene in air and their metabolite levels in urine with the levels of expressed CYP2B1/2 proteins. The general characteristics such as age, smoking and drinking habit were no significant difference between the control and exposed workers, but the working durations and working hours were significantly different. Workers in exposed group were exposed to the mean of 2.1 ppm (range, 0.00-4.54) of toluene and 0.3 ppm (rang, 0.00-1.23) of xylene. The mean concentration of urinary hippuric acid was low and less than 1/5 of the biological exposure index recommended by the Ministry of Employment and Labor Korea. Methyl hippuric acid in urine was not detected in control and exposed workers. Also, there were no significant differences in the levels of the urinary metabolites between the control and exposed group. When chemiluminescence dot blottings were carried out utilizing mouse monoclonal antibody against CYP2B1/2, the strong density dots corresponding to a mouse monoclonal antibody was observed in the human lymphocytes from the exposed workers. These results suggested that the chemiluminescence dot blot assay for CYP of lymphocytes should be valuable for identifying CYP expression as biomarkers in the workers exposed to toluene and xylene.

• Journal of Information Technology and Architecture
• /
• v.11 no.4
• /
• pp.463-470
• /
• 2014

Recently, government supporting policies on the revival of manufacturing industries are building up in the advanced economies like US and so on. Root manufacturing industry as the base of all manufacturing industries is accounting for SMEs by an absolute majority and Korean policies for SMEs are apt to increase in numbers. Nevertheless, there is no much concern in the area of root manufacturing industry SMEs. Especially, the effectiveness of R&D in root manufacturing industry is on the verge of controversy. As the results of root manufacturing industry SME's analysis, there are lots of various characteristics by fields in root manufacturing industry and the R&D results are not well carried over to business commercialization. In this paper, five policy proposals for root manufacturing industry SMEs are suggested based on the current situations of domestic and overseas countries.

• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.277-282
• /
• 2009

Purpose: The vegetative state is a clinical condition with complete unawareness of self and environment, but with preservation of brain - stem functions. Vegetative patients may have nosocomial infections in their wounds, like pressure sores and infected craniums after cranioplasties. Usually flap surgery is necessary for those wounds, but decision of undergoing surgery is difficult because of various adverse conditions of vegetative patients. We share our experience of several successful flap surgeries in vegetative patients, and evaluate obstacles and requirements to get satisfactory results. Methods: From December 2005 to September 2008, a total of 4 vegetative patients underwent surgeries. In 2 patients with infected artificial craniums, scalp reconstructions with free flaps were performed. In other 2 patients with huge pressure sores with sepsis, island flap coverage of wounds was done. Retrospective study was done on hospital day, vegetative period, number of surgeries done, underlying diseases, causative bacteria, and contents of informed consent. Results: Mean hospital day was 14 months and mean vegetative period was 17.5 months. Patients underwent average of 4.5 surgeries under general anesthesia. There were several underlying diseases like hypertension, DM, CHF and chronic anemia. MRSA(Methicilin - resistant Staphylococcus Aureus) was cultured from every patient's wounds. Informed consent included a warning for high mortality and a need of attentive familial cooperation. Conclusion: There are three requirements for doing flap surgeries in vegetative patients. First, to prevent aggravation of brain damage and underlying diseases by general anesthesia, multidisciplinary team approach is needed. Second, operation should be beneficial for prolonging patient's lifespan. Third, because postoperative care is very difficult and long hospitalization is needed, detailed informed consent and highly cooperative attitude of family should be confirmed before operation.

• Progress in Superconductivity
• /
• v.13 no.2
• /
• pp.105-110
• /
• 2011

SQUID sensor-based ultra low-field magnetic resonance apparatus with ${\mu}T$-level measurement field requires a strong prepolarization magnetic field ($B_p$) to magnetize its sample and obtain magnetic resonance signal with a high signal-to-noise ratio. This $B_p$ needs to be ramped down very quickly so that it does not interfere with signal acquisition which must take place before the sample magnetization relaxes off. A MOSFET switch-based $B_p$ coil driver has current ramp-down time ($t_{rd}$) that increases with $B_p$ current, which makes it unsuitable for driving high-field $B_p$ coil made of superconducting material. An energy cycling-type current driver has been developed for such a coil. This driver contains a storage capacitor inside a switch in IGBT-diode bridge configuration, which can manipulate how the capacitor is connected between the $B_p$ coil and its current source. The implemented circuit with 1.2 kV-tolerant devices was capable of driving 32 A current into a thick copper-wire solenoid $B_p$ coil with a 182 mm inner diameter, 0.23 H inductance, and 5.4 mT/A magnetic field-to-current ratio. The measured trd was 7.6 ms with a 160 ${\mu}F$ storage capacitor. trd was dependent only on the inductance of the coil and the capacitance of the driver capacitor. This driver is scalable to significantly higher current of superconducting $B_p$ coils without the $t_{rd}$ becoming unacceptably long with higher $B_p$ current.

• Progress in Superconductivity
• /
• v.13 no.2
• /
• pp.111-116
• /
• 2011

Since superconducting wires have no resistance, electromagnets based on the superconducting wires produce no resistive heating with DC current as long as the current does not exceed the critical current of the wire. However, unlike resistive wires, superconducting wires exhibit AC heat loss. Embedding fine superconducting filaments inside copper matrix can reduce this AC loss to an acceptable level and opens the way to AC-capable superconducting coils. Here, we introduce an easy and accurate method to measure AC heat loss from sample superconducting coils by measuring changes in the rate of gas helium outflow from the liquid helium dewar in which the sample coil is placed. This method provides accurate information on total heat loss of a superconducting coil without any size limit, as long as the coil can fit inside the liquid helium dewar. With this method, we have evaluated AC heat loss of two superconducting solenoids, a 180-turn solid NbTi wire with 0.127 mm diameter (NbTi coil) and a 100-turn filamented wire with 1.4 mm diameter where 7 NbTi filaments were embedded in a copper matrix with copper to NbTi ratio of 6.7:1 (NbTi-Cu coil). Both coils were wound on 15 mm-diameter G-10 epoxy tubes. The AC heat losses of the NbTi and NbTi-Cu coils were evaluated as $53{\pm}4.7\;{\mu}W/A^2Hzcm^3$ and $0.67{\pm}0.16\;{\mu}W/A^2Hzcm^3$, respectively.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.50-55
• /
• 2007

We have installed a 61-channel magnetocardiography (MCG) system inside a magnetically shielded room (MSR) with a size of $2.4\;m\;{\times}2.4\;m\;{\times}2.4\;m$. The MCG system consists of 1st-order axial gradiometers containing double relaxation oscillation SQUIDs (DROSs) with pick-up coils of a base line of 70 mm. The MSR holds a shielding factor of 50 at 0.1 Hz and 10000 at 100 Hz, when its door in the middle on a front wall is closed. On opening the MSR door, we have obtained the characteristics of the MCG system with a 2.9 Hz noise generated from an air conditioning unit at 13 m distance off the MSR. In an open-door MSR ($140^{\circ}$ opening), a noise at the center channel increases up to $700\;fT/Hz^{l/2}$ at 2.9 Hz and $1.7\;pT/Hz^{1/2}$ at 60 Hz. MCG signals for a healthy human do not show distortion until the door opens to $45^{\circ}$, but show the effect of noise when the door opens further at $90^{\circ}$ and $140^{\circ}$. With the door opens to $45^{\circ}$, MCG measurement can be performed with ease of door operation and without creating claustrophobia for the patient.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.29-34
• /
• 2007

The baseline selection is the first and important step to analyze magnetocardiography (MCG) parameters. There are no difficulties to select the baseline between P- and Q-wave peak (P-Q interval) of MCG wave recorded from healthy subjects because the P-Q intervals of the healthy subjects do not much vary. However, patients with ischemic heart disease often show an unstable P-Q interval which does not seem to be appropriate for the baseline. In this case, T-P interval is alternatively recommended for the baseline. However, there has been no study on the difference made by the baseline selection. In this study, we studied the effect of the different baseline selection. MCG data were analyzed from twenty healthy subjects and twenty one patients whose baselines were alternatively selected in the T-P interval for their inappropriate P-Q interval. Paired T-test was used to compare two set of data. Fifteen parameters derived from the R-wave peak, the T-wave peak, and the period, $T_{max/3}{\sim}T_{max}$ were compared for the different baseline selection. As a result, most parameters did not show significant differences (p>0.05) except few parameters. Therefore, there will be no significant differences if anyone of two intervals were selected for the MCG baseline. However, for the consistent analysis, P-Q interval is strongly recommended for the baseline correction.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.35-39
• /
• 2007

Myocardial ischemia causes heterogeneity of ventricular repolarization and sometimes produces changes of the ST-T wave in ECG. Therefore, morphological changes of ST-T waveform in ECG have a clinical significance in diagnosing myocardial ischemia. In this study, we investigated the ST-T changes caused by myocardial ischemia in magnetocardiography (MCG). We analyzed MCG patterns of biphasic T, ST segment deviations from baseline, main current angle of $T_{peak}$ and $T_{peak}$ dispersion in 300 CAD patients without ST elevation in ECG, 122 symptomatic patients and 48 normal subjects. MCGs were recorded by multichannel SQUID system in a magnetically shielded room. As results, we found that appearances of the abnormality were strongly correlated with the severity of myocardial ischemia. Also we found that the percentage of the patients showing MCG changes were higher than those in ECG. These results show that morphological changes of ST-T waveform in MCG can be used as a marker of myocardial ischemia.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.238-245
• /
• 2014

Objectives: It was known that workers in synthetic leather company are mainly co-exposed to dimethylformamide(DMF) with methyl ethyl ketone(MEK) or toluene(TOL) instead of a single dimethylformamide. This study was examined to the physico-chemical properties in single DMF and binary mixture DMF with MEK or TOL. Materials: Physico-chemical properties were measured by Korean and American Standard Test Methods. Results: Boiling point, specific gravity and flash point in single DMF were significantly higher than binary mixture DMF with MEK or TOL and such difference was dependent on the mixing ratio of MEK and TOL, and low explosion limit in binary mixture DMF with TOL was only significantly lower than single DMF. However, Reid vapor pressure had significantly higher in binary mixture DMF with MEK or TOL compared with single DMF. Conclusions: Our results demonstrate that the binary mixture DMF with MEK or TOL synergistically increases volatilization of DMF. It was concluded that the interaction between DMF and MEK and/or TOL might play a key role in the volatilization process of DMF under environmental conditions of workplace.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.71-80
• /
• 2014

Incheon international airport has tried to upgrade its image by hosting lots of international events and inviting celebrities as a honorary ambassador of airport. It is uncomparable to other airports all over the globe for incheon airport to utilize an honorary ambassador to promote airport. The purpose of this paper is to try to find out the PR effect of employing honorary embassador at Incheon airport, which has a positive impact on enhancing the image of Incheon airport. In other words, it should be considered the PR effect of honorary embassador has contributed to upgrading airport image resulting in the commitment of passengers. According to empirical research result, it is proven the attractiveness and trust of honorary embassador has not significantly positive impact on the airport's image. However it is also proven the PR activities of airport authority has a significant impact on the airport's image. Passengers believed the honorary ambassador has a high level of attractiveness and trust but they don't agree causal relationship among attractiveness, trust and airport image. That is, they are not interested in who is the honorary ambassador of airport but in the contents of airport's news article itself. The administrative implication is mentioned in the paper that airport authority should mainly focus on the contents of PR not the figure of the honorary ambassador.