• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.171-175
• /
• 2000

국내 시공사례가 가장 많은 사석식 경사제는 피복층(cover layer), 중간피복층(underlayer), 그리고 내부사석(core and bedding layer)으로 이루어져 있다. 이 중 중간피복층의 재료는, 피복재의 중량(W)에 대한 중량비 W/10에서 W/15의 자연석을 이용하여 시공하는 것이 보통이다. 그러나, 항만의 대형화에 따른 설계파의 증가로 이형블록과 같은 피복재의 소요 중량이 증가하는 추세이며 이에 따른 중간피복재의 소요중량도 크게 되어 그에 만즌 자연석을 구하기 어려운 실정이다. (중략)

• Journal of Biomedical Engineering Research
• /
• v.10 no.2
• /
• pp.151-156
• /
• 1989

Lung sound analyer which can provide an objective diagnosis of patients with pulmonary and bronchial disorders is designed. For the purpose of power spectrum analysis, adaptive digital filtering technique and TM - S320C25 DSP chip is used. As a results, adaptive lattice Wiener filter could eliminate heart sounds with a few of 10th order and on the distribution of power spectrum each patterns has shown in normal vescicular breathy from 100 Hz to 200 Hz, in crackle sound from 100 Hz to 400 Hz, in wheeze sound from 150 Hz to 600 Hz.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.139-151
• /
• 2000

Rockfall protection fence is one of the most common rockfall protection measures in Korea. The fences have been constructed in almost every hazardous cutslopes along national highway in Korea. However, the capability and performance of the fence as rockfall protection system are seldom known since no field test which can provide information on the response and the behavior of fence was carried out. This is the first full scaled rockfall test in Korea. The objectives of the test are to provide the information on the behavior and the capability of fence and to propose the design specifications for the fence. In this test, four different systems have been selected and tested. For each test, the rockfall impact energy was analyzed and the response and behavior of the system were investigated.

• Journal of Applied Reliability
• /
• v.13 no.1
• /
• pp.65-76
• /
• 2013

In order to assess the reliability of engine mount for a vehicles, life test model and procedure are developed. By using this method, failure mechanism and life distribution are analyzed. The main results are as follows; i) the main failure mechanism is degradation failure of engine mount rubber by fatigue failure at dynamic load. ii) temperature is a second factor to affect a failure. iii) the life distribution of engine mount module is fitted well to Weibull life distribution and the shape parameter is 18.4 and the accelerated life model of that is fitted well to Arrhenius model.

• The Journal of Korean Medical History
• /
• v.15 no.1
• /
• pp.3-10
• /
• 2002

Acupuncture and moxibustion of theory had begun in the "Nei-Jing" and "Nan-Jing". But definite acupuncture needling techniques had been investigated after Jin and Yuan Dynasty. After Ming Dynasty, much more scholars had studied about definite acupuncture needling techniques. So various techniques and theorys about how to select and operate needling points appeared in print. "Zi-Wu-Liu-Zhu-Zhen-Jing", "Zhen-Jing-Zhi-Nan", "Shen-Ying-Jing", "Zhen-Jiu-Da-Quan" and so forth are representative books. But these books include mutually different techniques, so then scholars would be thrown into confusion. So I have analysed acupuncture and moxibustion of theory into Ki(vital energy)-blood's circulation, disease region, time, sex, restorative and restrictive techniques. As a result, I have known that every restorative and restrictive techniques and theories are connected with Ki(vital energy)-blood's circulation and practical application methods are decided by sex, time, disease region, pathogenic energy.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.161-167
• /
• 1998

Cutting forces in ball-end milling of slanted surfaces are calculated. The cutting area is determined from the Z-map of the surface geometry and current cutter location. The obtained cutting area is projected onto the cutter plane normal to the Z-axis and compared with cutting edge element location. Cutting force is calculated by integration of elemental cutting forces of engaged cutting edge elements. Experiments with various slanted angles were performed to verify the proposed cutting force estimation model. It is shown that the proposed method predicts cutting force effectively for any geometry including sculptured surfaces with cusp marks and surfaces with pockets and holes.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.3
• /
• pp.240-249
• /
• 1993

The suspended sediment mechanism was systematically investigated by analyzing existing data together with new data obtained under several wave folds. A simple empirical formula has been developed to predict the time-averaged suspended sediment concentration above movable bed by the effect of wave and current interaction. The present study shows linear dependency of the diffusion coefficient of suspended sediment on the eddy viscosity coefficient obtained by considering the ripple geometry. Furthermore, it is proved that reference sediment concentration is reduced by the effect of ripple asymmetry.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.21-26
• /
• 2002

In this study, the characteristics of long period waves are analyzed by field observation at Sokcho harbor on the eastern coast of Korea. firstly. the pressure data obtained from field observation are transformed into water surface elevations and the wave by wave analysis is applied to the observed wave data. also, we select long period waves by setting up the range 30-200sec, and suggest the relationship between ordinary waves and long period waves using the concept of the significant wave height. and, we examine the effects oft he long period waves on the rate of the harbor operation. The observation results demonstrate that the long period waves with heights of 1.2-14.6cm and periods of 35.8-162sec exist at Sokcho harbor. also, we found the rates of harbor operation based on long period waves are 61.8%-99.5% lower than the usual rates of 93.8%-100%.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.27-31
• /
• 2002

The purpose of this study is to investigate the variation of resonance that is possible caused by construction of new port in a practical sea area between the existing port and the new one. The research of amplification that of the sea area was accomplished for the variation of resonance. In this study, long period wave that is observed continuously in the practical sea area was analyzed, and then secondary undulation was reproduced by numerical analysis. As a result of numerical analysis, the first mode resonant periods in the existing port is 640sec, and in the new one is 500sec. On the other hand, we know there is long period wave of 500sec from analyzation of field datas. Because that period this period is the resonant period in the new port. There is also the possibility of secondary undulation cause of resonant.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.11-16
• /
• 2006

A new method to fabricate metal electrodes on side wall of the microchannel is presented. Electrical signal can be measured by the metal electrodes on channel side wall when microparticles pass through a polymer microchannel. 3 dimensional metal electrodes on channel side wall could be fabricated by local deposition of metal through a shadowmask and inclined evaporation. The polymer microchannel with side wall electrodes could be precisely aligned onto metal contact patterns on pyrex glass. The impedance measurement test showed possibility of electrical signal measurement using the fabricated device.