• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.182-186
• /
• 2006

Due to their periodic helical structure, cholesteric liquid crystals (CLC) have a unique ability to selectively reflect light. CLC films reflecting a broad wavelength band were prepared by inducing a pitch gradient in CLC layer through a phase separation. The reflection bandwidth of the CLC cell was broaden as irradiation light intensity decreased and as the amount of the UV absorbing dye increased. Initial reflection bandwidth of 50 nm was broaden to 300 nm Various pitch distributions in the CLC cell was observed using SEM and ATR-IR technique was used to prove that the pitch distributions are induced through the phase separation.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.442-446
• /
• 2007

Alkali soluble and photo-curable polyesters were prepared from fluorene epoxy acrylate and various aromatic dianhydrides. To make a black matrix for LCD color-filter application, photo-resist solution was made by mixing synthesized polyester as binder, carbon black as pigment, initiator and multifunctional monomer in solvent. Black matrix pattern was formed on the glass substrate by lithography process. In this study, we synthesized various polyester-based binder polymers for LCD color-filter applications, and compared the analytical properties of those polymers and lithography patterns.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.1
• /
• pp.93-96
• /
• 2009

Primary localized amyloidosis of the ureter and bladder is a very rare condition. CT and cystoscopic findings are indistinguishable from malignant neoplasm or inflammatory lesions. We report a case of unilateral distal ureteral thickening caused by primary localized amyloidosis. MR image features of hypointensity on T2-weighted images and mural enhancing pattern on contrast enhanced T1-weighted images can be helpful for diagnosis of ureteral amyloidosis.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.159-164
• /
• 2006

We demonstrate a compact optical coherence tomography(OCT) system based on the optical fiber delay line controlled by a cylindrical piezo-electric transducer(PZT). An 18-m length of single mode fiber is wrapped under constant tension around a PZT. Approximately 134 windings are used. Wraps of the long length of fiber allow the small expansion of the PZT to be magnified to an optical path length delay of 0.78 m. The OCT system shows characteristics for 2-dimensional imaging, exhibiting 96.9dB of signal-to-noise ratio(SNR), $18.6{\pm}0.5\;{\mu}m$ of axial resolution, and $5\;{\mu}m$ of lateral resolution with samples.

• Journal of Technologic Dentistry
• /
• v.43 no.1
• /
• pp.13-18
• /
• 2021

Purpose: This study aimed to compare the flexural properties and perform the Weibull analysis of photo-curing three-dimensional (3D) printing resin. Methods: Photo-curing temporary resin (3D polymer) was used as a printing resin. Specimens (65 × 10 × 3.3 ㎣) were prepared following the ISO 20975-1 guidelines and according to the different printing orientations using a digital light processing 3D printer (D2 120; Dentium). The flexural strength (FS), flexural modulus, and work of fracture (WOF) were measured using a universal testing machine (Instron 3344; Instron) at a crosshead speed of 5 mm/min. Results: In this study, the 0° orientation exhibited higher FS and WOF than the 45° orientation. Significant differences were found among the printing orientations (p<0.05). Specimens printed at the 0° orientation were the most accurate. In the Weibull analysis, 0° showed the greatest Weibull modulus (m), which represents a higher reliability. Conclusion: 3D printing should be selected and used by considering flexural properties, size accuracy, and reliability.

• Journal of the Korean Home Economics Association
• /
• v.42 no.12 s.202
• /
• pp.161-174
• /
• 2004

The primary objective of this study was to employ Darden's store patronage model in order to investigate the role that shopping orientation and store attributes play in store patronage. The study sample consisted of 340 female university students residing in Seoul. The data was analyzed by using path analysis and factor analysis. The recreational shopping orientation played a greater role in influencing the importance of store attributes than did the convenience shopping orientation. Recreational shoppers want a variety of brands and convenience shoppers can be attracted by a convenient location and availability of parking. Six important store attributes(variety of products and price level, proximity, variety of trendy brands, store decor, sales promotion, sales personnel) have a differential influence on store patronage. Shopping orientation was a direct predictor of patronage behavior and mediated the relationship between shopping orientation and store attribute importance. The finding indicated that both the recreational shopping orientation and convenience shopping orientation can be used effectively to position store patronage in such a way as to provide a strong means for shoppers to satisfy their needs. The findings of this study demonstrated that South Korean female shoppers with different shopping orientation have different store attribute preference and store patronage. The results provide a basis for building a successful strategy to attract shoppers and generate sales. The study focused on a specific product category, i.e., women's apparel. To meet the needs of female apparel shoppers, further research is needed to learn more about the distinctive characteristics of Korean consumers that could be applied to a variety of jobs, ages and living areas.

• Journal of the Korean Home Economics Association
• /
• v.37 no.11
• /
• pp.59-73
• /
• 1999

The purpose of the present study was to identify the effect of perceivers’value and religions on the impresson of Korean catholic priest’s ritual dress. The subject consisted of 415 undergraduated students. The experimental materials developed for this study were 3type color photographs stimuli of catholic priest model and 7-point sementic differential scale composed of 49 bipolar adjectives representing personal traits. Perceivers were differenciated by AVL test. The data were analyzed by factor analysis and analysis of variance. The major findings drawl from this study were as follows : 1) Four factors( openness, religious nature, potency, characteristics of apperance) emerged to account for the dimentional structure of the impression of priest’s ritual dress. 2) The ritual dress and perceivers religion had partially significant effect on the impression of the priest. The ritual dress had an effect on openness and potency while the religious of perceivers affected religious symbolism and potency. Black suit with Roman collar and soutan were seen more authoritative, strong and independent than liturgical vestments. Catholic group saw priest with ritual dress more pure and potent than the other religious groups. 3) The ritual dress and perceiver’s value had partially significant effect on the impression of the priest. The ritual dress had an effect on openness, potency and the value had an significant interaction effect on potency. The group with political value perceived the priest with soutan more potent than black suit with Roman collar and liturgical vestments. Therefore the ritual dress and perceivers’value/religion had significant erect on Korean priest impression of openness, religious nature, potency. Research had also shown the similarity-attraction hypothesis which the individuals who hold similar characterisics are more Likely to be attracted.

• Korean Journal of Materials Research
• /
• v.31 no.9
• /
• pp.532-538
• /
• 2021

In this study, a spray dryer is used to make granules of Y₂O₃ and YF₃, and then Y₅O₄F₇ is synthesized following heat treatment of them under Ar gas atmosphere at 600 ℃. Single and binary monomer mixtures are compared and analyzed to optimize photocurable monomer system for DLP 3D printing. The mixture of HEA and TMPTA at 8:2 ratio exhibits the highest photocuring properties and low viscosity with shear thinning behavior. The optimized photocurable monomer and synthesized Y₅O₄F₇ are therefore mixed and applied to printing process at variable solid contents (60, 70, 80, & 85 wt.%) and light exposure times. Under optimal light exposure conditions (initial exposure time: 1.2 s, basic exposure time: 5 s), YOF composites at 60, 70 & 80 wt.% solid contents are successfully printed. As a result of measuring the size of the printed samples compared to the dimensions of the designed bar type specimen, the deviation is found to increase as the YOF solid content increases. This shows that it is necessary to maximize the photocuring activity of the monomer system and to optimize the exposure time when printing using a high-solids ceramic slurry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1038-1042
• /
• 2003

LED(Light Emitting Diodes)를 이용한 LCD 백라이트는 현재까지 모바일용의 $2{\sim}3$ 인치정도의 소형모델에서 상용화되고있다. 현재 동종분야에서 $5{\sim}7$ 인치 이상의 중대형에서는 아직 검토나 개발단계인 것으로 파악되고 있다. LED의 특징인 장수명, 고색순도, Robustness 등의 장점에도 불구하고 광효율이나 경제적측면에서 아직 형광램프 Type 에 비해 개선점이 남아있는 것도 개발지연 이유중의 하나다. 최근에 일부 광원업체에서 소비전력 5W로 높은 출광효율을 갖는 고휘도를 가진 LED가 개발되고있다. 고색재현성을 요구하는 TV등의 민수용 디스플레이시장이 커지는 현 추세에 한 방법으로 3색의 고휘도 LED광원을 사용한 백 라이트를 개발했다. R(Red), G(Green), B(Blue)의 3색 점광원 다수를 이중도광판 구조의 장변에 일정 간격으로 배열하여 최종 출사면에서 백색이 되도록 소정의 구성비로 설계하였다. 점광원간의 간격으로 인해 발생되는 혼색도를 보완하기위해 광원과 출사면까지의 광경로를 점광원이 아닌 튜브형의 형광광원 사용시보다 일정량 길게 설계해야 되는데, 이것으로 인해 출광효율이 형광램프구조에 비해 떨어지는 결과로 나타났다. 본 연구에서는 17인치 모니터구조의 백라이트에서 색재현성 105%와 소비전력 67W에서 표면휘도 $2000cd/m^2$ 정도를 달성하였다.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.87-93
• /
• 2011

We developed a fluorene-containing multifunctional binder polymer for LCD color filter resist, and employing the binder polymer, carbon black based black photoresist (CBR) was prepared in order to apply it to the black matrix (BM). To obtain the multifunction of the binder polymer, we synthesized bisphenol fluorene epoxy acrylate-containing unsaturated polyester and identified the binder polymer structure with $^1H$ NMR, GPC and FTIR. The corresponding BFEA-polyester binder polymer was compared with the commercially available acryl binder toward the application to the CBR. From the BM lithography test, we found that the synthesized BFEA-polyester binder had better photocrosslinking capability and alkali solubility. In addition, the newly developed binder gave a good process margin, good resolution and adhesion property on a glass substrate.