• Title/Summary/Keyword: 길이 보정

Search Result 306, Processing Time 0.036 seconds

The Fatigue Crack Growth Behavior of Concrete (콘크리트의 피로균열 성장거동에 관한 연구)

  • 김진근;김윤용
    • Magazine of the Korea Concrete Institute
    • /
    • v.9 no.3
    • /
    • pp.127-135
    • /
    • 1997
  • In this study, the wedge splitting tcst (WST) was carried out for the fatigue wack growth behavior of concrete. Selected test variables were concrete compressive strength of 28, 60 and 118 MI%, and stress ratio with 2 levels (6. 13%). In oder to make the designed stress ratio, the maximum and thr minimum fatigue loading level were 75-85% and 5- 10% of ultimate static load, respectively. Fatigue testing was preceded by crack mout.h opening displacement (CMOI)) compliance calibration tcst, and then the fatigue crack growth was computed by crack lcngth vs. (lMOI) compliance relations acquisited by the CMOD compliance calibration technique. To evaluate thc validity of CMOD compliancc calibration techniquc, the crack length p~mlicted by this method was cornpard with the crack length by linear elastic fracture mechanics(LEFIbl) and dyeing test. On the basis of the experimental results, a LRFhl-based c.mpirica1 model for f'at,igue crack growth rate(da/dN-AKI relationships) was presented. The fat,igut. crack growth ratc increased with the strength of concwtc. It appcars that t.he da/tiN-AKI relationships was influenced by stress ratio, however, the effect is diminished with an increase of strength. The comparisons between CblOl) compliance calibration technique anti the other. methods gave the validity of' ('MOD compliance calibration technique for the LZXT.

Development of Long-term Rainfall-Runoff Analysis System in SeongDeok Dam Watershed (성덕댐 유역의 장기유출 분석체계 구축)

  • Choi, Hyun Gu;Kim, Bong Jae;Kim, Seon Uk;Park, Byeong Woo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.429-429
    • /
    • 2018
  • 성덕댐은 기존 농업용 저수지였던 수락저수지를 다목적댐으로 재개발한 우리나라 최초의 사례로 2006년 11월에 착공하였다. 댐재개발 사업은 장랠 물 부족이 예상되나, 현재 마땅한 댐 개발적지가 부족하여 수자원 확보를 위해 기존의 댐을 재개발하는 것으로, 기 개발된 수자원의 활용도 제고 및 환경적으로 건전하고 지속 가능한 수자원을 개발하는 사업을 말한다. 기존의 수락저수지의 재원은 높이 19.0m, 길이 150.0m, 총 저수량 $806,000m^3$이었으며, 성덕다목적댐으로 재개발 되면서 증가된 주요재원은 높이 58.5m, 길이 274.0m, 총 저수량 $27,900,000m^3$이다. 성덕다목적댐 건설이 완료됨에 따라 기존의 농업용수($8,400m^3$/일) 공급뿐만 아니라 하천유지용수 $5,800m^3$/일 및 경북 청송, 영천, 경산지역에 생활용수와 공업용수를 $42,300m^3$/일를 공급할 수 있게 되었으며, 홍수조절용량 $4,200,000m^3$을 확보하여 유역의 홍수예방에도 기여할 수 있다. 댐의 운영기준을 수립하기 위해서는 적어도 20년 이상의 댐 유입량 자료가 필요하지만 성덕댐의 경우 댐 유입량 자료의 확보가 쉽지 않은 상황이다. 이에 K-water에서 개발하고 다양한 다목적 댐 유역에 적용한 경험이 있는 격자기반 강우-유출 모형인 K-DRUM(K-water Distributed Rainfall rUnoff Model)을 이용하여 성덕댐 유역의 장기유출모형을 구축하였다. 격자기반 수문모형의 장점은 공간적인 비균질성을 고려하여 물리적인 유출과정을 모형화할 수 있고, 이로 인해 신뢰성 있는 수문해석이 가능하기 때문이다. 성덕댐 유역의 K-DRUM 모형을 구축하기 위해서 토지이용도, 토양도(종류, 유효토심), 하천차수도, 유역도, 표고분포도 등을 수집하였으며, 격자는 60m의 정사각형 격자로 약 11,500개를 구성하여 적용하였다. 기상자료로는 안동, 의성, 영천 기상대의 강우자료와 안동 기상대의 기상자료를 활용하였다. 모형의 보정을 위해서는 2016년을 시단위로 모의하였으며 성덕댐 유입량와 비교하여 매개변수를 보정하였고, $R^2$는 0.72, NSE는 0.70, RMSE는 1.82로 신뢰도 높은 보정결과를 획득할 수 있었다. 보정된 매개변수를 성덕댐 유역의 장기유출에 적용하였으며, 1997년부터 2017년까지 총 21년 장기유출 모의를 수행하였으며, 모의결과는 댐 운영기준의 기초자료로 활용하였다.

  • PDF

A Study for Finding Optimized Cable Forces of Cable Stayed Bridge (사장교 케이블 최적 장력 보정에 관한 연구)

  • Park, Dae-Yong
    • Journal of the Korean Society for Advanced Composite Structures
    • /
    • v.3 no.1
    • /
    • pp.16-20
    • /
    • 2012
  • During construction of the cable-stayed bridge, not only shape of deck and pylon but also cable forces are main factors for geometry control. Especially, geometry control of deck must be controlled for adjusting design value of vertical and lateral alignment as well as closing of key segment. Also, both the deck level error and cable force error occur necessarily during the construction stage in cable stayed bridge. The errors are caused by different of material properties and computer modeling, and construction mistake, and so on. These causes bring about that the forces of cable and the displacement of deck show different tendency from the theoretical values. Therefore, these errors must necessarily be adjusted and can be improved through adjustment of cable length. In this study, a new optimization tool is proposed to adjust the errors of the second Dolsan cable-stayed bridge.

Technology Review and Development Trends of Dual-Bell Nozzle for Altitude Compensation (고도 보정용 듀얼 벨 노즐 개발 동향과 기술 분석)

  • Choi, Junsub;Huh, Hwanil
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.43 no.5
    • /
    • pp.456-465
    • /
    • 2015
  • Dual-bell nozzle can overcome the performance losses of the conventional bell-shaped nozzles which induced by off-design operations with either over-expanded or under-expanded exhaust flow and minimize the losses of the specific impulse. In United States, Rocketdyne analyzed thrust characteristics according to the shape of the expansion nozzle and NASA conducted hot firing tests with various altitudes. DLR, which is one of the research institute of the Europe, is carrying out research for the different cases of inflection angle, nozzle length and expansion ratio. MAI of Russia applied the slot nozzle to the expansion region in order to reduce the performance losses. In Asia, both the Japan and the India are researching on the dual-bell nozzle and Mitsubishi cooperation of the Japan registered its patent. In this paper, concepts and performance of dual-bell nozzle, which can compensate altitude, are investigated and trends of current research are summarized. It is necessary for Korea to research on the dual-bell nozzle for lucrative space development.

Prediction and Calibration of Transverse Mechanical Properties of Unidirectional Composites with Random Fiber Arrangement Considering Interphase Effect (계면 특성을 고려한 무작위 섬유배치를 갖는 단방향 복합재료의 가로방향 기계적 물성 예측 및 보정)

  • Park, Shin-Moo;Kim, Do-Won;Jeong, Gyu;Lim, Jae Hyuk;Kim, Sun-Won
    • Composites Research
    • /
    • v.32 no.5
    • /
    • pp.270-278
    • /
    • 2019
  • In this study, the transverse mechanical properties of the unidirectional fiber reinforced composite modeled with fiber, matrix, and interphase is predicted with the representative volume elements and is calibrated by adjusting the properties and thickness of the interphase by referring to the test results. While the conventional representative volume elements modeled with fiber and matrix shows high predictive accuracy for the longitudinal mechanical properties, but it shows some deviations in the transverse mechanical properties. In order to compensate such gaps, the interphase region is employed, and its mechanical properties are adjusted to improve the prediction accuracy according to various elastic modulus, thickness, and strength parameters. As a result, the deviation of the transverse elastic modulus and strength is reduced significantly similar to the test results of the unidirectional composites with the accuracy of the longitudinal mechanical properties preserved.

Empirical experiment to improve the applicability of the formula for time of concentration (홍수도달시간 산정식 적용성 개선을 위한 실증실험)

  • Keum, Ho Jun;Ko, Taekjo;Joo, Jaeseung;Kim, Yerim;Jung, Dojoon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.123-123
    • /
    • 2021
  • 도시하천유역이나 복합유역 등 지역적 성향을 고려한 도달시간 산정에 관한 연구는 현재까지도 미흡한 실정이다. 소규모 유역의 홍수량을 산정할 경우 유하시간보다 유입시간 비중이 상대적으로 크다. 그러나 유하시간만을 고려하여 도달시간을 산정할 때, 소규모 유역의 경우 하도가 없고 유역면적이 5km2 내외 또는 하도의 저류 효과를 기대할 수 없는 경우 도달시간이 짧아 홍수량이 과대 산정된다. 이를 극복하고자 재해영향성평가등의 협의 실무지침에서는 도달시간 이외에 매개변수인 저류상수를 인위적으로 증가시키는 방법을 제안하고 있다. 하지만 이 방법 역시 유역의 물리적인 특성을 나타내는 변수를 왜곡한다는 근복적인 문제를 완전히 해결하지 못하였다. 이에 본 연구에서는 기존 중·대규모 하천을 대상으로 수행된 연구결과를 바탕으로 제안된 홍수 도달시간 산정방법의 한계를 극복하고, 유입시간이 지배적인 소규모 복합유역에 적용 가능한 도달시간 산정방안을 제시하고자 한다. 이를 위해 실증실험을 통해 기존 유입시간 산정식을 개선하고, 도시수문 모니터링 시범유역에 적용하여 정확성을 평가하고자 하였다. 먼저, 홍수도달 시간 측정을 위한 강우유출 실내 실험장치를 제작하였다. 실험장치는 본체(길이3m×폭1.2m×높이0.8m)와 경사조절 장치(0~15도)를 포함하고 있다. 본체 전면부를 타공(ø10mm)하고 상·하단에서 지표와 기저유출을 집수하여 티핑버킷으로 유량을 측정하였고, 토체 내에는 토양수분센서를 설치하여 강우유출 발생시간 동안 토양수분 변화를 측정하였다. 본 연구에서는 하도흐름인 유하시간(Kraven 공식)을 계산하여 도달시간을 산정하기 보다 지표면 흐름인 유입시간(Kerby 공식)에 보정계수를 도입하여 도달시간을 산정하는 방안을 검토하였다. 실험 결과, 불투수 면적비율이 증가함에 따라 도달시간은 감소하고, 불투수 유역이 하류에 위치할수록 유출발생시간이 빨라졌다. 실증실험 결과를 바탕으로 도시수문 모니터링 시범유역에 적용하여 기존 유하시간과 저류상수를 보정하는 도달시간 산정방식(연속형 Kraven)과 유입시간을 보정한 도달시간 산정(수정 Kerby)으로 도출된 유출량을 실측 유량과 비교하였다. 그 결과 제안된 홍수도달시간 산정식에서 모의된 홍수량이 기존 방식과 유사하거나 우수한 첨두홍수량을 보였으며, 설계자 임의성이 배제된 일관성있는 해석값을 제시해 줄 것으로 판단된다.

  • PDF

Calibration of Delft3D Flow Simulation Considering Flow Resistance due to Vegetation (식생에 의한 흐름 저항을 고려한 Delft3D 흐름 모의 보정)

  • Jang, Eun Kyung;Ahn, Myeong Hui;Bae, In Hyeok;Ji, Un;Truong, Hong Son
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.310-310
    • /
    • 2020
  • 자연하천에서 식생의 성장은 유속 및 수위 변화에 중요한 영향을 미치며, 따라서 식생으로 인한 흐름저항은 흐름과 유사이송 모델링을 위한 중요 매개 변수가 된다. 즉, 수치 모델을 활용함에 있어 식생의 흐름 저항을 정확하게 추정하는 것이 매우 중요하며, 보다 정확한 추정을 위해 실험 혹은 현장 데이터를 활용한 보정과정이 필수적으로 요구된다. 본 연구에서는 식생 패치를 포함한 인공 수로의 흐름 모의를 위해 실규모 실험 수로에서 측정된 유속 및 수위 데이터를 활용하여 모델보정을 수행하고자 한다. 이를 위해 공간 분포 별로 각기 다른 흐름 저항식의 적용이 가능하며, 식생 저항 공식을 포함하고 있는 Delft3D 모델을 활용하였다. 또한 실규모 수로에서의 유속 및 수위 데이터 수집을 위해 한국건설기술연구원 하천연구센터에서 실험을 수행하였다. 실험 구간의 길이는 약 120 m이고 하폭은 11 m이며, 국내 하천에서 보이는 식생패치의 유사한 형태를 재현하기 위해 하천 내 가장 많이 활착되어있는 버드나무와 유사한 형태의 인공식생을 제작하였다. 인공 식생은 지그재그로 배치되었으며, 식생의 전체 높이는 1.1 m이고, 각 패치 당 23그루의 인공 식생이 총 8개 패치에 식재되었다. 모의 조건은 상류단 유입 유량 2.805 ㎥/s, 하류단수위 98.764 m의 정류 조건을 적용하였다. 또한 식생 패치 구간에서의 흐름 저항 추정을 위해 Delft3D 모델 내에서 선택가능 한 Baptist의 비침수(Non-submerged)식을 적용하였으며, 항력계수 결정을 위해 1과 1.5를 적용하여 측정 수위와 비교하였다. Delft3D의 흐름 모의 결과, 항력계수 1.5를 적용했을 때, 측정 수위와 거의 일치하는 것으로 나타났으며, 항력계수 1.0을 적용했을 경우, 측정 수위에 비해 다소 낮게 모의되는 것으로 나타났다. 또한 항력계수 1.5인 경우 식생 패치 구간에서 평균 0.65 m/s의 유속이 발생하였다.

  • PDF

Embeded-type Search Function with Feedback for Smartphone Applications (스마트폰 애플리케이션을 위한 임베디드형 피드백 지원 검색체)

  • Kang, Moonjoong;Hwang, Mintae
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.21 no.5
    • /
    • pp.974-983
    • /
    • 2017
  • In this paper, we have discussed the search function that can be embedded and used on Android-based applications. We used BM25 to suppress insignificant and too frequent words such as postpositions, Pivoted Length Normalization technique used to resolve the search priority problem related to each item's length, and Rocchio's method to pull items inferred to be related to the query closer to the query vector on Vector Space Model to support implicit feedback function. The index operation is divided into two methods; simple index to support offline operation and complex index for online operation. The implementation uses query inference function to guess user's future input by collating given present input with indexed data and with it the function is able to handle and correct user's error. Thus the implementation could be easily adopted into smartphone applications to improve their search functions.

Slim Mobile Lens Design Using a Hybrid Refractive/Diffractive Lens (굴절/회절 하이브리드 렌즈 적용 슬림 모바일 렌즈 설계)

  • Park, Yong Chul;Joo, Ji Yong;Lee, Jun Ho
    • Korean Journal of Optics and Photonics
    • /
    • v.31 no.6
    • /
    • pp.281-289
    • /
    • 2020
  • This paper reports a slim mobile lens design using a hybrid refractive/diffractive optical element. Conventionally a wide field of view (FOV) camera-lens design adopts a retrofocus type having a negative (-) lens at the forefront, so that it improves in imaging performance over the wide FOV, but with the sacrifice of longer total track length (TTL). However, we chose a telephoto type as a baseline design layout having a positive (+) lens at the forefront, to achieving slimness, based on the specification analysis of 23 reported optical designs. Following preliminary optimization of a baseline design and aberration analysis based on Zernike-polynomial decomposition, we applied a hybrid refractive/diffractive element to effectively reduce the residual chromatic spherical aberration. The optimized optical design consists of 6 optical elements, including one hybrid element. It results in a very slim telephoto ratio of 1.7, having an f-number of 2.0, FOV of 90°, effective focal length of 2.23 mm, and TTL of 3.7 mm. Compared to a comparable conventional lens design with no hybrid elements, the hybrid design improved the value of the modulation transfer function (MTF) at a spatial frequency of 180 cycles/mm from 63% to 71-73% at zero field (0 F), and about 2-3% at 0.5, 0.7, and 0.9 fields. It was also found that a design with a hybrid lens with only two diffraction zones at the stop achieved the same performance improvement.

A Study on the Development of Hoist Balance Controller (권양기의 밸런스제어장치 개발에 관한 연구)

  • Yoon, Jong-Beom;Lee, Jong-Chan;Choi, Jang-Geon;Lee, Jae-Hoon;Goo, Do-Hyeong
    • Proceedings of the KIEE Conference
    • /
    • 2005.07d
    • /
    • pp.2591-2593
    • /
    • 2005
  • 본 연구는 물체의 좌우측 상단에 연결된 와이어로프를 모터 및 드럼을 통하여 감아 올리거나 내려 놓는 과정에서 물체가 수평상태를 유지하여 이동될 수 있도록 Two Motor-Two Drum 형식의 권양기를 제어 하는 권양기의 밸런스제어장치에 관한 것이다. 본 연구에 Two Motor-Two Drum 형식의 권양기 제어장치에 있어서, 물체의 상단에 연견된 일측 와이어로프와 타측 와이어로프의 이동길이를 실시간으로 검출하는 와이어로프 이동길이검출부와, 이 와이어로프 이동길이검출부를 통하여 검출되는 일측 와이어로프와 타측 와이어로프의 이동길이를 비교하여 물체의 기울어진 좌 우 편차를 검출하는 편차검출부와, 이 편차검출부를 통해 검출되는 좌우 편차를 제거하기 위하여 일측 또는 타측 와이어로프가 감겨있는 드럼을 회전시키는 모터의 구동속도를 조절하여 물체를 수평상태로 보정하는 밸런스제어부로 구성 되어 있다.

  • PDF