• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.248-248
• /
• 2011

유전체 모세관을 이용한 해수에서의 펄스고전압 방전 특성을 연구하였다. 내경 1, 2, 3 mm의 구멍이 뚫린 Quartz 블럭에 외경 1, 2, 3 mm의 SUS 핀을 삽입하였고 삽입된 핀의 끝이 해수에 담구어 지도록 하여 고전압 방전을 발생 시켰다. 인가된 펄스 고전압은 5 kHz의 반복 주파수를 가지며, Pulse 폭을 $1{\sim}2.5{\mu}sec$까지 변화 시켜 전압전류 파형과 방전양상을 살펴 보았다. 방전은 펄스폭 변화에 따라 전해전도 전류에 의한 모세관 가열, 모세관내 미세기포형성, 기포내의 코로나 방전 개시 그리고 글로우 또는 아크방전으로 발전하는 것을 확인하였다. 모세관의 길이는 각각의 구경에 대하여 5 mm, 10 mm 두 가지로 변화하여 실험하였고, 모세관 길이 10 mm 조건에서는 방전이 매우 불안정 하였다. 각각의 방전조건별로 1~5분간 방전을 진행하여 해수내의 유리염소의 농도 변화를 살펴본 결과 방전모드가 글로우 또는 아크 방전 모드에서 단위 에너지당 유리염소 발생 수율이 큰 폭으로 증가하는 것을 확인할 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.22-27
• /
• 1990

The cavity-length detuning characteristics of the hybridly mode-locked dye laser have been studied with a collinear autocorrelator. In the optimum condition, the pulse width is 0.65 ps about three times as short as that of the synchronously mode-locked dye laser. As the cavity length is increased, the pulse width becomes broader than that at the optimum cavity length because of the effect of spontaneous emission. Also, the spectrum width becomes broad, therefore the time bandwidth product ($\Deltat\Deltav$) is increased. The peak power of autocorrelation is maximum at $\Deltat=5.0\umm$ longer than the optimum cavity length. On the other hand, as the cavity length is decreased, the pulse width becomes broader and the satellite pulses appear because of the gain recovery. Also the spectrum width becomes narrower than that at the optimum cavity length. In particular, at the mismatched cavity length the center of the lasing spectrum moves to shorter wavelengths. ngths.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.107-115
• /
• 2011

This research studies the behavior of the FRP-concrete interface subjected to two environmental substances. Frist is to investigate the behavior by the application of different bonding materials at the interface between FRP and concrete, second is to understand a long-term performance at the interface by Freeze-thaw actions. The parameters considered in this research are the maximum bonding strength and the effective bonding length at the FRP-concrete interface. In the first experimental phase, three types of specimens are fabricated and tested considering the number of applied bonding materials and the Freeze-thaw tests are performed to evaluate the behavior of the interface in the cycle range of 0 to 300 cycles. Finally, it is known that there is a 5~7% difference of the effective bonding length between applied bonding materials and the values for the maximum stress and the effective length under Freeze-thaw action are varied randomly as the freeze-thaw cycle is increased even though initial reduction of their capacities are occurred.

• Proceedings of the SAREK Conference
• /
• 2005.06a
• /
• pp.97-97
• /
• 2005

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.683-687
• /
• 2010

This paper studied some methods which use frequency warping method that is the one of the speech transformation method to develope the robust speech recognition system for the emotional variation. For this purpose, the effect of emotional variations on the speech signal were studied using speech database containing various emotions and it is observed that speech spectrum is affected by the emotional variation and this effect is one of the reasons that makes the performance of the speech recognition system worse. In this paper, new training method that uses frequency warping in training process is presented to reduce the effect of emotional variation and the speech recognition system based on vocal tract length normalization method is developed to be compared with proposed system. Experimental results from the isolated word recognition using HMM showed that new training method reduced the error rate of the conventional recognition system using speech signal containing various emotions.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.233-241
• /
• 2022

Purpose: The purpose of this study was to assess the dimensional change of 3D-printed dentures after post-curing. Materials and Methods: The upper and lower dentures were designed in Exocad DentalCAD software and exported as STL files. The upper and lower dentures were printed from 10 STL files using a DLP-type dental 3D printer. The printed upper and lower dentures were cleaned, and a scan file was created using a model scanner before and after post-curing. The dimensional change was evaluated by superimposing the scanned denture files before and after post-curing and measuring the distance between measurement points on the denture. SPSS was used for statistics, and the level of significance was 5%. Results: The maxillary denture reduced in size during post-curing, with the most notable color change occurring in the posterior palatal region. The reduction in anteroposterior maxillary denture length (A-D, A-E, A-F), as well as the distance between the first molars on both sides (B-C), was statistically significant. After post-curing, the mandibular denture showed more noticeable color change in the posteriorly buccal and lingual region. The decrease of length on the posterior (A-M, A-D, A-E, A-L, A-H, A-I, H-I) and lingual (J-K, L-M) sides of the denture were statistically significant. Conclusion: There was significant dimensional change in both the length and width of the 3D-printed maxillary and mandibular dentures after post-curing in this experiment. Consequently, it is seemed necessary to develop post-curing techniques and materials that reduce such denture deformation.

• 베이커리
• /
• no.6 s.359
• /
• pp.70-72
• /
• 1998

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.223-231
• /
• 2006

This study deals with behavior characteristics of laminated composite folded structures according to ratio of folded length based on a higher-order shear deformation theory. Well-known mixed finite element method using Lagrangian and Hermite shape interpolation functions is a little complex and have some difficulties applying to a triangular element. However, a higher-order shear deformation theory using only Lagrangian shape interpolation functions avoids those problems. In this paper, a drilling degree of freedom is appended for more accurate analysis and computational simplicity of folded plates. There are ten degrees of freedom per node, and four nodes per element. Journal on folded plates for effects of length variations is not expressed. Many results in this study are carried out according to ratio of folded length. The rational design is possible through analyses of complex and unpredictable laminated composite folded structures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.581-586
• /
• 2015

This paper has analyzed the variation of subthreshold swing for the ratio of channel length and thickness for asymmetric double gate MOSFET. The asymmetric double gate MOSFET has the advantage that the factors to control the short channel effects increase since top and bottom gate structure can be fabricated differently. The degradation of transport property due to rapid increase of subthreshold swing can be specially reduced in the case of reduction of channel length. However, channel thickness has to be reduced for decrease of channel length from scaling theory. The ratio of channel length vs. thickness becomes the most important factor to determine subthreshold swing. To analyze hermeneutically subthreshold swing, the analytical potential distribution is derived from Poisson's equation, and conduction path and subthreshold swing are calculated for various channel length and thickness. As a result, we know conduction path and subthreshold swing are changed for the ratio of channel length vs. thickness.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.161-172
• /
• 2004

본 연구의 목적은 각기 다른 수직 점프 동작 시 근육의 길이와 근육의 수축속도 변화를 비교 분석하는데 있다. 피험자의 운동학적 변인들을 분석하기 위해 2대의 고감도 카메라를 (60 Hz, Panasonic AG455) 사용하여 점프 동작을 촬영하였다. 대퇴직근, 내측광근, 외측광근, 중간광근, 대퇴이두근(단두), 내측과 외측 비복근의 길이와 근수축 속도는 Brand et al. (1982)에 의해 제시되어진 하지근 기시 정지점의 3차원 좌표값과 동작분석을 통한 하지 분절간의 회전 및 변환행렬을 사용하여 측정되어졌다. 일반적인 근육 길이와 수축속도의 변화 형태는 각기 다른 점프간에 매우 유사한 형태를 보였다. 상승기 초기에 대퇴사두근의 길이가 최대인것으로 나타났으며, 이에 반해 대퇴이두근과 내외측 비복근은 공중 동작이 발생하는 시점에 근의 길이가 최대인 것으로 나타났다. 근육의 길이 변화 범위는 대퇴직근이 35.9에서 47.5 cm, 외측광근이 29.4에서 38.8 cm, 중간광근이 31.5에서 38.0 cm, 내측광근이 30.9에서 38.6 cm, 대퇴이두근이 21.3에서 39.1 cm, 외측비복근이 31.4에서 33.5 cm, 내측비복근이 30.5에서 33.2 cm인 것으로 나타났다. SQ와 CMJ에서는 대퇴사두근의 최대 단축성 수축 속도와 대퇴이두근과 내외측 비복근의 최대 신장성 수축이 공중동작이 발생하기 바로 전에 이루어졌다. 대퇴사두근의 최대 신장성 수축과 대퇴이두근과 내외측 비복근의 최대 단축성 수축은 일반적으로 피험자가 착지하는 순간에 발생되어졌다. 그러나 HJ와 DJ에서는 대퇴사두근의 최대 신장성 추축과 대퇴이두근과 내외측 비복근의 최대 신장성 수축이 하강기 초반에 발생되어졌다.