• Korean Journal of Ichthyology
• /
• v.5 no.1
• /
• pp.85-95
• /
• 1993

Sexual dimorphism of the matured chum salmon, Onchorhynchus keta, have been studied based on biometrical measurements and osteological characters. Male chum salmon has an elongated and hooked upper jaw and canine-like teeth on the upper and lower jaw. The ratios of snout length (SnL) and upper jaw length (UJ) to head length of male were larger than those of the female, whereas eye diameter (ED) and postorbital part of head (CK) of the male were smaller than those of the female's. The ratios of body depth, caudal peduncle depth, anal fin length and adipose fin length to the standard length (PBL) of the male were also larger than those of the female. On sexual dimolrphism was detected in number of fin rays, gill rakers and pyloric ceaca, where as number of lateral line scales and caudal vertebrae of the female was larger than those of the male. Glossohyal and vomer bones has no sexual difference. The ratio of width to length of supraethmoid bone of the male was larger than that of the female. The ratio of frontal part to posterior part of parasphenoid bone of the male was smaller than that of the female.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.27-30
• /
• 2001

Electromigration Phenomena in Al-1%Si thin film interconnections under DC and PDC conditions were investigated. Thin film interconnections with $SiO_2$ and PSG/$SiO_2$ dielectric passivation layer were formed by a standard photolithography process method and test line lengths were 100, 400, 800, 1200, and 1600 $\mu\textrm{m}$. The current density of $1.19\times10^7\textrm{A/cm}^2$ was stressed in Al-1%Si thin film interconnections under DC condition. The current density of $1.19\times10^7\textrm{A/cm}^2$ was also applied under PDC condition at the frequency of 1 Hz with the duty factor of 0.5. The electromigration resistance of PSG/SiO2 dielectric passivation test line was stronger than $SiO_2$ dielectric passivation test line. The lifetime under PDC was 2-4 times longer than DC condition. As the thin film interconnection line increased, the lifetime decreased and saturated over the critical length. Failure patterns by an electromigration were dominated by void-induced electrical open and hillock-induced electrical short.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.199-207
• /
• 1996

According to the different baseline lengths, we quantitatively analyzed how much precision of the baseline de-termination is improved for GPS survey when using the precise ephemeris instead of the broadcast ephemeris of GPS satellites. For this research, we selected seven baselines ranging from 15 km to 201 km and performed GPS measurements more than six times for each baseline. The observed data for each baseline were processed two times with the same conditions alternately changing the broadcast and the precise ephemeris. The standard deviations from the repeated measurements for each baseline are compared between the results of using the broadcast ephemeris and the precise ephemeris. As the result, the precision, stability and reliability of the base-line determination using the precise ephemeris is better than those of using the broadcast ephemeris for all base-lines. When using precise ephemeris for the baselines longer than 65 km, the precision less than 0.1ppm is always obtained and the precision improvement rate by using the precise ephemeris is considerably greater than that for the shorter baselines. We expect that this result might be a quantative basis for the decision about what ephemeris is better for the baseline length and the demanded precision in GPS survey.

• Proceedings of the Korea Society of Costume Conference
• /
• 2003.05a
• /
• pp.34-34
• /
• 2003

본 연구는 체형의 특성이 현저히 나타나는 40~50대의 Plus-size 여성을 대상으로 체형의 특징이 고려된 치수체계에 대해 맞음새가 우수한 재킷을 개발하고, 이 원형을 토대로 하여 체형의 단점을 보완할 시각적 효과를 연구하기 위해 Plus-size에 해당하는 여성을 선정하여 수트(suit)를 제작한 후 착의 평가하여 Plus-size에 적합한 수트를 제안하는데 목적을 두고 있다. 결과를 요약하면 다음과 같다. 1. Plus-size 여성의 착용실태를 파악하기 위해 실시한 착용실태 조사는 판매자의 측면의 심층면접과 소비자 측면의 착장조사로 구분하여 조사하고 분석하였다. 착용실태조사 결과, Plus-size 여성은 의복구매시 맞음새와 편안함을 중시하고 상완부와 어깨의 두께, 가슴둘레와 복부의 비만등의 체형단점을 갖게 되므로 판매자측에서는 의복제도 시에 등품, 앞품, 상완부, 복부의 여유분을 고려하고 있었다. 시각적 효과로는 세미피트 스타일의 프린세스 라인과 허리선+20, 30cm의 재킷길이, 그리고 테일러드 칼라, 스테인 칼라, 라운드 네크라인이 판매자과 소비자의 양측면에서 선호되고 있었다. 2. Plus-size 여성의 체형에 맞음새가 우수한 재킷원형을 개발하기 위해 Plus-size 여성복의 재킷 원형 중 4종의 기존원형을 선정하고, 착의 피험자 3인을 대상으로 3차에 걸친 착의실험을 통해 연구 원형을 개발하고 평가단을 구성해 객관적인 평가 33문항에 대한 외관 관능검사를 실시하였다. 1) 가슴둘레 여유분을 8~9cm, 허리둘레 여유분을 6~7cm, 엉덩이둘레 여유분을 6~8cm로 적용하여 맞음새를 향상시켜 날씬해 보이는 효과를 높였다. 2) 진동깊이 계산식은 (B/10+10.5)+2cm 적용하고, 진동두께 계산식은 (B/8-1.5)+2cm를 적용함으로써 진동깊이와 진동두께의 편차가 작아짐으로 인해 소매부위와 진동부위의 맞음새를 향상시켰다. 3) 가슴둘레의 증가에 따라 등길이에 앞길이 치수를 증가시키는 계산식을 설정하여 앞가슴둘레의 맞음새를 향상시켰다. 4) Plus-size여성의 경우 허리부분의 신체적합성을 높이기 위하여 사이드 판넬(side panel)의 재킷원형으로 하였다. 앞 허리와 배 부분의 지방 침착이 크므로 앞 허리둘레 다아트 폭과 앞판 사이드 판넬(side panel) 솔기 다아트 폭을 작게 설정하고, 뒤판 사이드 판넬 솔기 폭을 크게 설정하였다. 5) 어깨끝점 사이길이는 다른 부위의 체지방 침착과 같이 비례적으로 증가하지 않으므로 표준체형에 비해 좁게 설정하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.37-37
• /
• 2011

태풍 루사나 매미에 의한 피해사례를 보면 하천 횡단 구조물 본체가 파괴되는 피해 뿐 만 아니라, 구조물과 제방과의 연결부가 세굴되어 붕괴되는 사례가 많이 발생하였다. 하천설계기준(2009)에는 이러한 보와 제방의 연결부 부분을 연결호안이라 하여 관련 기준을 제시하고 있으나, 설치구간의 길이를 정할 때 하천의 규모나 하도의 특성을 고려하지 못하고 일률적으로 결정하도록 하고 있다. 이에 건설기술연구원에서는 상류 Froude 수와 보 높이를 변수로 하는 연결호안 설치 길이에 대한 실험식(2006)을 제시하였다. 하지만 보 접속부 세굴에 영향을 주는 인자는 상류의 Froude 수와 보의 높이 뿐만 아니라, 상 하류 수위차, 보의 형상, 제방의 재료적 특성 등 많은 요인들이 존재한다. 이 중 본 연구에서는 상 하류 수위차와 보 접속부 세굴 범위의 관계를 파악하고자 한다. 보 접속부 세굴에 대한 수치모의에 앞서 Gill(1972)와 Dongol(1990)이 수행하였던 교대세굴 자료를 바탕으로 Flow-3D의 세굴에의 적합성 및 적용성을 검토하였다(그림 2참고). 검토 결과 수치모의의 입력 변수를 조정함으로써 실험값과 가깝게 나타나는 것을 확인하였다. 이렇게 조정된 변수를 이용하여, 보 접속부 세굴에 대한 수치모의는 상 하류의 수위차에 대해 다양한 검토를 하기 위해 상류의 수위를 1.0m로 고정한 채하류부의 수위를 0.2~0.8m까지 0.1m간격으로 변화시켰으며, 유사의 대표 입경은 0.63mm로 주문진 표준사를 가정하였다. 모의 시간은 평형세굴심이 발생할 때까지 수행하였고, 난류모델로는 LES(Large Eddy Simulation)를 채택하였다. 모의 결과 상 하류 수위차가 증가할수록 보 하류부 세굴 길이($L_d$)가 증가 하였으며, 세굴의 폭($B_d$) 역시 증가하였다. 그림 3은 수치모의 결과로 세굴이 발생된 제방의 모습을 도시한 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.281-286
• /
• 2007

The Navier-Stokes equations are numerically solved for a two-dimensional small nozzle with the area ratio of 1.8 between the throat and the exit. The shock structures are verified inside the nozzle and near the exit varying with the pressure ratio and the length of the diverging part, respectively. Especially the irregular patterns in the pressure distribution near the throat are analyzed based on the geometric characteristics. It is found that there are similar phenomena in the shock wave structure between the pressure ratio and the length changes. Also there exists a normal shock just between two different oblique shocks crossing each other in special cases.

• Journal of Korea Water Resources Association
• /
• v.37 no.10
• /
• pp.813-822
• /
• 2004

This study quantifies and compares the drought return and duration characteristics by applying the Poisson process as well as based on by analyzing the observed data directly. The drought spatial distributions derived for the Gyunggi province are also compared. The monthly rainfall data are used to construct the SPI as a drought index. Especially, this study focuses on the evaluation of the Poisson process model when applying it to various data lengths such as in the spatial analysis 'of drought. Summarizing the results are as follows. (1) The Poisson process is found to be effective for the quantification of drought, especially when the data length is short. When applying the Poisson process, two neighboring sites are found insensitive to the data length to show similar drought characteristics, so the overall drought pattern becomes smoother than that derived directly from the observed data. (2) When the data length is very different site by site, the spatial analysis of drought based on a model application seems better than that based on the direct data analysis. This study also found more obvious spatial pattern of drought occurrence and duration when applying the Poisson process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.189-195
• /
• 2008

The OFDMA Physical layer in the WiMAX standard of IEEE 802.16e adopts 114 LDPC codes with various code rates and block sizes as a channel coding scheme to meet varying channel environments and different requirements for transmission performance. In this paper, the performances of the LDPC codes are evaluated according to various code rates and block-lengths throueh simulation studies using min-sum decoding algorithm in AWGN chamois. As the block-length increases and the code rate decreases, the BER performance improves. In the cases with code rates of 2/3 and 3/4, where two different codes ate specified for each code rate, the codes with code rates of 2/3A and 3/4B outperform those of 2/3B and 3/4A, respectively. Through the statistical analyses of the number of decoding iterations the decoding complexity and the word error rates of LDPC codes are estimated. The results can be used to trade-off between the performance and the complexity in designs of LDPC decoders.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.725-728
• /
• 2014

Continue to have an increasingly violent crimes against children every year, and as you know all seriousness is classified as a felony. However, efforts to reduce the underlying crime is low. Therefore, it is necessary to solve this problem, the security system. Is to protect the children and adults that exist that can pose a threat to children to identify and monitor tracking method in this paper. Was based on a Korean standard body size of a person, such as keys, arm length, leg length, head vertical length, head width proposed method. Also, separate the adults and children through the comparison of the reference value, the ratio and the ratio of the number of pixels of the detected object, the proposed method. Processing speed is fast because it detects only a specific object region in the entire image in the handling method in the proposed method the five nine minutes. The advantage is to enable comparison of the specific object, through which there is.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.325-334
• /
• 2008

The standard prestressed concrete I-girder bridge (PSC I-girder bridge) is one of the most prevalent types for small and medium bridges in Korea. When determining the member forces in a section to assess the safety of girder in this type of bridge, the general practice is to use the simplified practical equations or the live load distribution factors proposed in design standards rather than the precise analysis through the finite element method or so. Meanwhile, the live load distribution factors currently used in Korean design practice are just a reflection of overseas research results or design standards without alterations. Therefore, it is necessary to develop an equation of the live load distribution factors fit for the design conditions of Korea, considering the standardized section of standard PSC I-girder bridges and the design strength of concrete. In this study, to develop an equation of the live load distribution factors, a parametric analysis and sensitivity analysis were carried out on the parameters such as width of bridge, span length, girder spacing, width of traffic lane, etc. As a result, the major variables to determine the size of distribution factors were girder spacing, overhang length and span length in case of external girders. For internal adjacent girders, the determinant factors were girder spacing, overhang length, span length and width of bridge. For internal girders, the factors were girder spacing, width of bridge and span length. Then, an equation of live load distribution factors was developed through the multiple linear regression analysis on the results of parametric analysis. When the actual practice engineers design a bridge with the equation of live load distribution factors developed here, they will determine the design of member forces ensuring the appropriate safety rate more easily. Moreover, in the preliminary design, this model is expected to save much time for the repetitive design to improve the structural efficiency of PSC I-girder bridges.