• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.463-471
• /
• 2017

There is a world of unconscious that works when creating story contents. The unconscious layer of the abyss has the artist goes on the path of creating a common story structure without knowing because the human race is connected. It is monomyth and is now used as an important authoring tool. Analyzing the structure of the silent film "A trip to the Moon" made before the discovery of it, we can still find the frame of monomyth. Although this film is an intuitive imagination of the inspiration received from four contemporary works, the monomyth has been completely revealed.. This means it's still working regardless of area or time. That's why the story that was created in a modern short time has the same structure as the myth that passed down for a long time because there is archetype of story in human collective unconscious. This archetype determines the way the story. The human brain is not infinitely free to imagine but that it can be applied to the surface along the path of the archetype. Good story contents is less likely to succeed if it does not follow the path proposed by the archetype within our collective unconscious.

• 한국생활과학회:학술대회논문집
• /
• 2010.05a
• /
• pp.113-114
• /
• 2010

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.649-653
• /
• 2014

채널 내부에 장애물이 존재하는 유동 형태는 다양한 공학적 문제에서 나타나고 있으므로 여러 가지 형상 및 유동 조건에 따른 유동 특성 연구가 필요하다. 따라서 본 논문에서는 장애물의 형상을 일정한 크기의 원형 실린더로 설정하고 실린더는 위아래 채널 벽 중앙에 위치하도록 하여 2차원 채널 내에 원형 실린더가 존재하는 경우에 대하여 CFD연구를 수행하였다. 실린더와 위아래 채널 벽면과의 거리를 변화시켜 각각의 거리에 대해 유동 재부착 길이, 유동의 주기성, 항력계수 등의 유동 특성을 관찰하였다. 연구결과 각 간격[실린더벽면과 채널벽면간의 거리(G)/실린더지름(d)]이 0.5, 1, 2, 3, 5, 15에 따른 재 부착 지점(Reattachment Length)은 채널 벽면이 실린더로부터 멀어질수록 완전히 열린 유동장에서의 유동 재부착 지점에 수렴해간다는 것을 확인하였다. 즉 거리가 멀어질수록 벽면 영향이 줄어든다는 것을 확인하였다. 또한 각각의 경우에 대해 항력계수 값을 구하였고, 이를 완전히 열린 유동장에서의 항력계수 값과 비교해 보았다. 그 결과 벽면으로부터의 떨어진 거리가 5부터 벽면의 효과가 줄어들어 10이상이 되었을 때부터 그 영향이 아주 미미하다는 것을 확인하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.546-549
• /
• 2003

본 논문에서는 GPS용 안테나의 소형화를 위해 패치 길이 방향으로 T자형 슬릿 구조를 이용하여 GPS 중심 주파수인 1.575 GHz로 안테나를 설계, 제작하였다. 선형편파의 경우, 설계 주파수에서 패치 높이 3 mm 일 때, 패치 길이 $48 mm{\times}$폭 90 mm로 평면형($84 mm{\times}90 mm$)에 비해 42.9 %의 길이 단축 효과를 얻었으며, 반사손실 -20.3 dB, -10dB 대역폭 9 MHz (0.5 %), E-면 -3dB 빔폭 $77.7^{\circ}$, H-면 -3dB 빔폭 $66.2^{\circ}$, 이득 5.3 dBd의 특성을 나타내었다. 원형편파의 경우, 설계 주파수에서 패치 크기는 $57 mm{\times}57 mm$의 정방형으로서 T자형 슬릿 길이만을 조절하여 $90^{\circ}$의 위상차를 야기시켰으며 평면형 원형편파($82 mm{\times}86.5 mm$)에 비해 54.2 %의 면적 축소 효과 및 이득 3.89 dBd, 반사손실 -28.9 dB, 축비 1.96 dB, 2dB 축비 유지 대역폭 18 MHz로 양호한 원형편파 특성을 얻었다.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.97-103
• /
• 2015

Natural convection heat transfer rates in vertical pipes were measured varying the diameter, length, and roughness of vertical cylinder. To achieve high Rayleigh number with relatively small test rig, mass transfer experiments instead of heat transfer were performed based on the analogy. Prandtl number was 2,014. The length of vertical cylinder was 0.1m, 0.3m, and 0.5m, which correspond to GrL $4.2{\times}10^7$, $1.1{\times}10^9$, and $5.5{\times}10^9$. To each length of vertical cylinder, the heat transfer rates were measured varying the iameter 0.005m, 0.01m, and 0.03m. The heat transfer rate for a short length pipe(0.1m) agreed with the prediction from Le Fevre correlation developed for a vertical plate for all diameter. The heat transfer rate decreases as the diameter and the length of the pipe increases. The heat transfer rate inside of vertical cylinder is affected by roughness only for a laminar flow regime.

• 한국생활과학회:학술대회논문집
• /
• 2010.05a
• /
• pp.115-116
• /
• 2010

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.385-390
• /
• 2012

A radial heat sink, adopted to LED(light emitting diode) downlight, was optimized. Discrete transfer radiation model (DTRM) was used to calculate radiation heat transfer, and numerical model was verified with experimental results. The effects of number of fin, long fin length and middle fin length on overall thermal resistance and radiation heat transfer were analyzed. As the emissivity increased, thermal resistance decreased due to the increment of radiation heat transfer. The radial heat sink was optimized and optimum number of long fins is 19~28, optimum length of long fin is about half of radius of heat fink and optimum fin ratio is 0.4~0.7.

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2016.03a
• /
• pp.87-88
• /
• 2016

• The Research Journal of the Costume Culture
• /
• v.18 no.6
• /
• pp.1242-1253
• /
• 2010

The purpose of this study is to suggest a designing method with excellent body suitability by analyzing clothingwearing porosity, comparing and analyzing patterns, and evaluating outer appearances by designing a prototype of study applied with design measurements for categories that have influence on the outer appearance of clothing through diverse research methods, by comparing and analyzing bunka and new bunka style basic pattern, which are proportional basic patterns most frequently used in schools for educational use to design bodice pattern for elderly women in their late 60s. As for the process of this study, the first stage selected study subjects, measured bodies. The second stage compared patterns of bunka and new bunka style basic pattern and evaluated outer appearances that deduced important pattern designing categories to design upper-torso bodice pattern of elderly women. The results of this study are as following ; As a result of comparing and analyzing bunka and new bunka style basic pattern, overall evaluation of outer appearance was excellent for new bunka style basic pattern, and bunka basic pattern received better reviews for the width and depth of front neck. In terms of waist circumference, waist front length, bust point location and bust point-bust point, bunka and new bunka style basic patterns showed a significant difference. new bunka style basic pattern had 4.5cm larger front armhole depth than bunka basic pattern, so it was evaluated to have more appropriate front armhole length, bust point location, and bust point-bust point. Through observation for primary excellent categories and precedent studies, 7 categories of front neck width, front neck depth, front interscye, back neck width, back neck depth, back interscye, and back armhole depth were deduced to have relations to the extra room around arm holes and waist that affect pattern designing method and porosity and evaluations of outer appearance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.320-324
• /
• 2017

Effect of elliptical orifice on the spray characteristics of liquid jet ejecting into subsonic crossflows were experimentally studied. Circular/elliptical plain-orifice injectors, which had different ratios of the orifice length to diameter and major axis to minor axis, were used for transverse injection. Compared with the previous research, breakup lengths of elliptical nozzles are shorter than circular nozzles at all experimental condition. Cavitation/hydraulic flip are considered as a reduction in the breakup length at all circular/elliptical nozzle. In the case of liquid column trajectories, major axis which was placed to the crossflows, increases the frontal area of the liquid column exposed to the crossflows. Hence, the aerodynamic force exerted on the jet is increased and the penetration depth is reduced.