• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.600-605
• /
• 1998

체내방사능 측정시스템의 교정인자는 측정결과에 주요한 요인으로 작용한다. 교정인자는 특정 집단으로부터 표준체위와 표준장기를 도출, 이를 기초로 하여 제작한 펜텀으로부터 구하는 것이 일반적인 방법이다. 그러나 팬텀의 기하학적 구조 및 내부장기의 형상은 특정 집단에 따라 다르므로 이로 인한 측정오차가 발생할 수 있다. 따라서 본 연구에서는 북아메리카 성인남성의 표준자료에 근거하여 제작된 LLNL 팬텀과 일본성인 남성의 표준자료에 근거하여 제작된 JAERI 팬텀을 한국원자럭연구소 폐 카운터를 이용하여 상호비교.분석하였다. 이와 함께 LLNL 팬텀으로 교정된 폐 카운터의 성능시험을 JAERI 팬텀으로 DOELAP 성능시험범주 I, II, III 및 IV에 대해 수행하여 편텀의 구조 및 형상으로부터 발생하는 측정오차를 분석하였다. 비교.분석결과 1.7 cm ~ 3.7 cm 근육등가 가슴벽두께 범위내에서 JAERI 팬텀에 의한 교정인자가 전반적으로 LLNL 팬텀의 것보다 다소 높은 수치를 보였으나 허용수준이었고, 성능시험결과 상대편중은 DOELAP 성능 용인 기준을 만족하였다. 결국 두 팬텀간의 측정오차는 측정 및 체내피폭선량 평가시 수반되는 오차와 비교해 보면 그다지 크지 않은 것으로 결론지울 수 있다. 따라서 LLNL 펜텀으로부터 구한 교정인자를 국내 성인남성의 일상 모니터링에 사용할 경우 측정결과가 다소 과대평가되기는 하나 허용수준으로서 큰 문제가 없는 것으로 나타났다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.1 s.12
• /
• pp.1-14
• /
• 2004

The objective of this study is firstly to frame up the seismic safety of concrete gravity dams. It is necessary to analyze seismic response and evaluate seismic performance of concrete gravity dams during earthquake. In this study, seismic damage and dynamic analysis of concrete gravity dams using structural analysis package such as SAP2000 and MIDAS were performed. Additional dynamic water pressure due to earthquake considered as additional mass for numerical seismic analysis. According detailed analysis, the vibration through the dam structure (transverse to water flow) seems to be very critical depending on the shape of the dam. For more precise evaluation of seismic fragility of concrete gravity dams, further research is still needed.

• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.55-60
• /
• 2008

Purpose: This study is to decide a quality control and calibration period of LCD display devices used for reading diagnostic images. Materias and Methods: The assessment test of 20 flat panel LCD color display devices used for reading diagnostic images were performed based on AAPM TG 18 protocol over the total six sessions at one month intervals from three months after primary calibration, in terms of geometric distortion, reflection test, luminance response evaluation, luminance uniformity, resolution, noise, veiling glare and chromaticity test. Results: The results of geometric distortion, reflection test, luminance uniformity, resolution, noise, veiling glare and chromaticity test were within the criteria recommended by AAPM TG 18, except for luminance response evaluation. In the measured luminance deviation of luminance response evaluation, 4(25%) of 20 display devices were passed a criterion from four months after calibration, and 11 (55%) were passed from eight months. Also in the contrast response of the luminance response evaluation, 1(5%) display device was passed a criterion from four months after calibration, and 3(15%) were passed from eight months. Conclusion: Considering the passing deviation after calibration, the time required and a manpower, the quality control and calibration period of LCD display devices used for reading diagnostic images should be a three months and six months after calibration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6A
• /
• pp.379-387
• /
• 2012

This study investigates free vibration characteristics of new energy harvesting multi-layer block structures with different geometrical shapes using solid and shell finite elements and evaluate their piezoelectric effect on experiments. The two and three-dimensional finite element (FE) delamination models for block structures described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the entire vibration mode shape. The FE model using ABAQUS is used for studying free vibrations of multi-layer block structures for various tip mass and PZT. In particular, new results reported in this paper are focused on the significant effects of the global and local vibration modes for various parameters, such as size of block shape, existence of tip mass and hole, and location of tip mass and PZT. In addition, we evaluate the power generation capacity of developed energy block structures through a laboratory-scale experiment.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.233-241
• /
• 1999

A large-scale hot water production system using a natural circulation loop was developed. A computer simulation program was developed to design and evaluate thermal performance of the natural circulation system for hot water production. An experimental apparatus was set up and was tested against various conditions to exhibit a stable operating region of the natural circulation loop. When the system was a stable state for heating rate (695 ㎾) and feed water was circulated at 0.3 $\ell$/s constantly. A unstable state was checked by experiment and that time flow rate was oscillated with 0.4∼0.6 $\ell$/s. The result showed that the program can predict the thermal performance of the large-scale hot water system using the natural circulation loop and can be utilized to design the system.

• The Journal of Engineering Geology
• /
• v.7 no.3
• /
• pp.229-245
• /
• 1997

There are Common aspects between the underground oil storage cavern and the radioactive waste disposal facility. Both facilities use appropriately the intrinsic natural berrier characteristics of the rock mass and additionally the engineered barrier system for the long term safety. The geological structures and their hydrogeological characteristics in a faactured rock mass act a major role in the safety and performance of the underground oil storage facility through the design, construction and the operation stages. Because the fracture system distributed in a fractured rock block is complicated owing to their own geometrical and hydrogeological attributes, the hydrogeological perforrmrnce of the facility would depend mainly upon the understandings of their characteristics. This study reviews the uncertainties and key issues which have to be considered to analyse the groundwater flow system in a fractured rock mass and proposes the techniques applicable to characterize the hydrogeological parameter.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.311-312
• /
• 2022

최근 발생한 경주 및 포항 지진으로 인해 다수의 매립배관 손상이 보고되었다. 벨로우즈 신축관이음은 기하학적 특성으로 인해 진동 및 침하 등으로 인한 손상을 저감시킬 수 있다. 벨로우즈 신축관이음관의 내진 성능평가에 대한 실험적 혹은 해석적 연구는 미미한 상황이다. 본 연구는 벨로우즈 신축이음관의 내진성능을 분석하기 위해 반복하중 기반의 실험적 연구를 수행하였다. 또한 실험결과를 기반으로 3차원 유한요소 모델을 구축하였으며 실험과 해석에서 얻어진 하중-변위 관계를 비교하였다. 해석 모델에서 전체적인 강성이 큰 것으로 나타났으며 최대 변위가 작용할 때 에너지 소산량은 약 10% 가량 큰 것으로 나타났다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.624-631
• /
• 2002

In this paper, an effective digital watermarking method for copyright protection of binary image data is proposed. First a binary image is grouped into feature regions which has geometrical features and general one. The watermark for authentication is embedded in general regions in order to preserve geometrical features regions. We have used run-length code and special runs for grouping feature regions and general one. For invisibility of watermark, we have embedded the watermark considering transition sensitivity of each pixel in general regions. The proposed method is applied some binary image such as character, signature, seal, and fingerprint image to evaluate performance. By the experimental results, the proposed method preserve feature regions of original image and have higher invisibility of watermarks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.177-180
• /
• 2002

In this paper, an effective digital watermarking method for copyright protection of binary image data is proposed. First, a binary image is grouped into feature regions which have geometrical features and general one. The watermark for authentication is embedded in general regions in order to preserve geometrical features regions. We have used run-length code and special runs for grouping feature regions and general one. For invisibility of watermark, we have embedded the watermark considering transition sensitivity of each pixel in general regions. The proposed method is applied to some binary image such as character, signature, seal, and fingerprint image to evaluate performance. By the experimental results, the proposed method preserve feature regions of original image and have higher invisibility of watermarks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5834-5840
• /
• 2013

Along with the development of high-speed, wired and wireless Internet technology, various harmful images in a form of photos and video clips have become prevalent these days. In this paper, we suggest a method of automatically detecting adult images by extracting woman's nipple areas which represent obscenity of the image. The suggested algorithm first segments skin color areas in the $YC_bC_r$ color space from input images and extracts nipple's candidate areas from the segmented skin areas through the suggested nipple map. We then select real nipple areas by using geometrical information and determines input images as harmful images if they contain nipples. Experimental results show that the suggested nipple map-based method effectively detects adult images.