• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.359-362
• /
• 2009

Damping characteristics of pressure oscillation induced by an orifice in fluid feeding line for are investigated numerically and experimentally. Assuming small pressure oscillation, acoustic damping effect of orifice is confirmed experimentally, and with the mean flow, damping characteristics of an orifice are investigated numerically. When an orifice is installed at the node of pressure oscillation corresponding to the anti-node of velocity oscillation, suppression of pressure oscillation is maximized and with the mean flow, the resonant frequency is decreased. And, it is found that the optimal position of an orifice for damping shouled be changed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.60-66
• /
• 2008

Each weapon system's muzzle velocity can be used as basic data for operating accurate automatic firing control system. Even among the same kind of ammunition, despite taking into consideration various battlefield parameters, irregular performance causes difficulties in obtaining accurate muzzle velocity data. In this study, pressure in the gun barrel was measured, the experimental relationship between chamber pressure and the projectile's base pressure was found, and a method of obtaining muzzle velocity was researched. Through this method, data regarding muzzle velocity is offered that corrects irregular performance.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2010

The existing maintenance program is focused on time-based maintenance to inspect and repair components according to maintenance period, rather than condition-based maintenance or predictive maintenance. The preventive maintenance template of the steam turbine has been developed for optimizing maintenance procedure and improving reliability and availability of the steam turbine of nuclear power plants based on EPRI PM template methodology and EPRI technical reports about preventive maintenance.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.188-194
• /
• 2002

버섯의 감압건조시험을 할 수 있는 요인시험장치를 제작하여 시험한 결과를 요약하면 다음과 같다. 가. 댐퍼조절방식 감압건조장치로 건조시험한 결과, 표고버섯은 건조온도 5$0^{\circ}C$에서는 나타나 건조실 압력에 따른 건감률의 변화는 크게 나타나지 않았으나, 건조온도 6$0^{\circ}C$에서 건조실 내부압력이 990hPa일 때 4.57%/hr로 1,013hPa에 비해 높게 나타났으며, 색차면에서는 온도 5$0^{\circ}C$일 때 건조실 내부 압력이 낮아질수록 변화가 적은 것으로 나타났고, 수축률은 압력별로 거의 변화가 없었으나, 건조온도 6$0^{\circ}C$, 압력 990hPa에서 다른 조건에 비해 양호한 것으로 판단되었으나 건조실 내부에 공기분배가 일정하지 않고, 건조실 내부압력 강하성능이 떨어지는 문제점이 발생하여 솔레노이드를 이용한 압력조절방식으로 보완 제작하여 건조시험을 실시하였다. 나. 솔레노이드방식 감압건조장치로 건조시험 한 결과, 표고버섯은 열풍온도 5$0^{\circ}C$, 건조실 내부압력 940-980hPa에서 건감률 2.69%w.b./hr, 갓의 복원률 90.1%로 가장 높았고, 색차 및 수축률이 가장 낮은 것으로 나타났으며, 건조실 내부압력을 900-940hPa로 고정하고 열풍온도를 40, 50, 6$0^{\circ}C$로 표고버섯을 시험한 결과 건감률은 6$0^{\circ}C$일 때 가장 높았으나, 색차, 수축률, 복원률을 고려할 경우 열풍온도 5$0^{\circ}C$가 가장 적합한 것으로 판단된다. 다 솔레노이드방식 감압건조장치로 건조한 표고버섯으로 품위에 대한 유의성 검증결과, 표고버섯의 경우 온도별로는 색택과 복원률, 건조실 내부 압력별로는 수축률, 복원률에서 유의차가 있는 것으로 나타났다. 라. 본 연구에서 구명된 감압건조특성을 기초로 하여 배치식 감압건조기를 설계 제작에 활용하고자 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.73-76
• /
• 2002

본 연구에서는 기존의 추력측정 방법보다 간단한 추력측정 방법으로서 피토 압력을 이용한 방법을 제안하였고, 이의 검증을 위해 소형 추력측정기를 제작하였다. 추력측정기를 이용하여 모델로켓 모터 및 초음속 풍동의 추력측정을 통하여 그 가능성을 확인하였고 본 연구의 목표인 피토압력과 추력측정기를 이용한 측정 추력의 비교연구가 계획되어 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.37-37
• /
• 2000

일반적으로 노즐 입구의 압력과 배압의 비가 어떤 임계값보다 큰 경우에 축소확대 노즐을 통하는 유동은 노즐목에서 초크하며, 노즐출구에서는 용이하게 초음속으로 된다. 노즐을 통하여 초음속으로 방출되는 제트유동에 관해서는 현재까지 많은 연구가 수행되었다. 이들 연구에 의하면 노즐 압력 비에 따라 노즐출구에서의 유동상태(즉 과팽창, 적정팽창, 부족팽창상태)가 결정되며, 노즐출구로부터 하류의 초음속 제트유동에서 발생하는 충격파 구조 및 위치, 제트경계의 구조 그리고 제트의 코어 등 유동의 기구가 비교적 상세하게 알려져 있다.(중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.11a
• /
• pp.75-76
• /
• 2001

• Journal of the Korean Geotechnical Society
• /
• v.21 no.10
• /
• pp.123-131
• /
• 2005

In the present study, laboratory pull-out tests with screw anchors are carried out to investigate behavior characteristics of the anchors used in foundation system of underground structures which are applied to uplifting seepage forces. Small scaled pull-out tests in sand under saturated condition and dry condition were carried out. For estimating the group effects of the anchors, the upward displacement and the pullout load varied with spacing of the anchor were observed. The test results were compared with theoretical equation for the ultimate pull-out force. Also, the result of tests can be used to the finite element analysis program, $PENTAGON^{2D}$.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.63-67
• /
• 2019

In this study, the pressure loss of a fire hose reel hydrant was examined and the effects of each factor on the pressure loss were analyzed. First, in the pressure loss experiment according to the length of the reel hose, the pressure loss increased with increasing length of the reel hose; it was approximately 38.86% based on a 25 m hose. Second, the pressure loss of the reel hose per unit length was estimated to be $.13{\sim}.15kgf/cm^2$. Third, in the pressure loss experiment according to the change in the flow rate, the result was similar to the relation, flow rate - pressure loss (${\Delta}P{\sim}Q^2$), in the piping flow. These results provide basic data on the evaluation of fire pump pressure and the performance-based fire-protecting design of fire hose reel hydrants used in buildings.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.57-64
• /
• 1998

A neutralized fabric filter of which major raw materials were polyester and stainless steel fibers was developed and its physiochemical properties and basic filter characteristics were investigated. Four finds of dusts generated in the typical domestic industry were used, which were coke dust from a steel manufacturing process, cement dust from a cement manufacturing process, flu ash from a fluidized-bed combustor, and incinerator ash from a waste plastics incinerator. The physicochemical properties of the neutralized fabric filter were analyzed in terms of changes in tensile strength and initial elastic modulus under $SO_2$ and $NO_2$ atmospheres, mean flow pore pressure, bubble point pore diameter, mean flow pore diameter, and pore size distribution. In addition, the pressure drop, dust penetration, and figure of merit for the fabric filter were investigated in a bench-scale filter testing unit. The pressure drop increased as the filtration velocity and dust loading increased, and its increasing shape depended on the type of dust. The dust penetration rapidly decreased as the dust loading increased irrespective of the type of dust. The figures of merit for the fabric filters increased in the early stage of filtration and then showed rapid decreases followed maintaining a constant level.