• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.270-271
• /
• 2003

링 레이저 자이로스코프는 회전각을 검출하는 센서로서 광학식이 가지는 정밀함과 견고성으로 관성항법을 비롯한 운동 제어를 필요로 하는 여러 분야에서 기존의 기계식 자이로스코프를 대체해 오고 있다. 링 레이저 자이로는 세 개 또는 네 개의 반사경으로 밀폐된 고리형 공진기를 구성하고 He-Ne 기체를 봉입하여 방전시킴으로써 서로 반대 방향으로 진행하는 레이저를 동시에 발진시키면 Sagnac 효과에 의해 공진기의 회전각에 비례하여 두 레이저의 주파수 차이가 발생하는 원리를 이용한다. (중략)

• Nuclear Engineering and Technology
• /
• v.20 no.4
• /
• pp.246-252
• /
• 1988

Experiments on the hydrogen gas breakdown for plasma initiation in the KAERIT tokamak are described. The influence of the applied loop voltage, toroidal magnetic field, gas filling pressure, error magnetic field, and preionization is studied. It is concluded that the magnitude of the error field is the most important factor for successful discharge initiation. The gas breakdown voltage becomes minumum when the external compensating field most effectively corrects the net error field. Even though preionization effect is not prominent, it is exhibited more easily in the case of worse confinement. Discharge initiation conditions experimentally determined are compared with those calcuated from a theoretical model. Some other unknown physical processes maintain the operation range somewhat narrower than predicted by the present theoretical model. However, this model is adequate for the breakdown phase of tokamaks.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.5 no.3
• /
• pp.25-30
• /
• 1968

The characteristics of single mesh discharge circiut for Xenon flashlamp has been analysised in detail. Since flashlamp voltage characteristics is linear in time, though nonlinear in current, the nonliear differential equation , for this system has beens solved by the analog computer. Also for given lamp type, energy input, pulse duration, and pulse shape factor, the inductance, capacatince and operating voltage were discussed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.5 no.3
• /
• pp.31-39
• /
• 1968

In this paper microwave power propagated through the cold plasma was analyzed and measured with respect to the external magenetic flux density. The d. c discharge plasma was in the rectangular waveguide in which two electrode was inserted, and also the glass diseharge tube inserted in the ractangular wavegside. The direction of microwave pro-pagation, the axis of the discharge tube and external magnetic flux were perpendicular to each other. It showed that the attenuation and absorption of micro wave power propagated in the plasma was increased as the magnetic flux density, the discharge current and the pressure of the gas were increased.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.119-124
• /
• 2010

This paper addresses the design and fabrication of desktop die-sinking dry electrical discharge machining (EDM) system and its experimental performance analysis. The developed desktop dry EDM machine has the horizontal configuration with the size of $300{\times}200{\times}260mm$. The experimental performance analysis is conducted to investigate the effects of EDM conditions and dielectric gas temperature on the surface roughness of EDMed slots and number of EDM sparks. The experimental results demonstrate that low feed rate and large electrode displacement are good for better surface roughness and more number of EDM sparks. In addition, low temperature of dielectric gas results in better surface roughness.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.3 no.4
• /
• pp.49-56
• /
• 1989

약 이온화되어 있는 기체 방전에서 전자 에너지 분포함수는 계산상 어려움으로 인하여 맥스웰 분포를 가정하나 이러한 가정은 실제 방전내의 전자 에너지 분포함수와 차이를 보이게 된다. 본 논문에서는 저압 수은 방전에 대하여 전자온도, 관벽온도, 전자밀도, 포화증기압밀도를 변수로 사용하여 볼쯔만식을 해석하였다. 구성된 방정식으로부터 정상상태를 가정하여 구한 전자 에너지 분포함수는 보통 적용하는 맥스웰 분포와 꼬리부분에서는 많은 차이를 보였다. 특히 충돌 단면적을 에너지의 함수로 근사하여 식을 간략화함으로써 분포함수를 간편하게 구할 수 있으며 광범위하게 적용할 수 있는 방법을 제안하였다. 또한 명확한 이론에 근거한 해석적 모델을 제시하여 분포함수의 해석을 용이하게 하고 계산과정을 간편하게 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.224-224
• /
• 1999

KSTAR 토카막의 플라즈마 가열을 위한 NBI 장치의 대전류 이온원 방전 특성을 수소와 헬륨 개스를 사용하여 조사하였다. NBI 이온원은 빔 방향과 반대로 가속되는 전자들을 저지하는 전자덤프(electron dump), 병렬로 연결된 32개의 텅스텐 필라멘트(직경 1.5nn0, 영구자석(Nd-Fe)에 의해 만들어지는 강한 cusp 자장으로 둘러싸인 플라즈마 방전실 및 120kV의 에너지를 인가하는 가속부로 이루어지는데, 최대 빔 전류 65A에서 300초의 장시간 운전을 목표로 하고 있다. 수소와 헬륨 개스 분위기에서 안정된 플라즈마를 얻을 수 있는 필라멘트 전류의 파형을 각각 구하고, 기체압력(0.01~0.4 mbar) 및 아크 전류(100~1200A에)에 따른 플라즈마 파라메타 값들을 직경 1mm의 Langmuir probe를 이용하여 측정하였다. 또한 이온원 운전에 중요한 파라메타인 방전실 내의 플라즈마 밀도 분포와 장시간 운전 가능성에 대한 조사도 수행하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.564-570
• /
• 2007

This study investigated the treatment of liquid waste containing highly concentrated iron(III)-ethylenediaminetetraaceticacid (Fe(III)-EDTA) of 70,000 mg/L by an underwater electrical discharge process using low voltage and high current. When AC voltage is applied to the discharging electrode with the other electrode grounded, the temperature of the liquid waste around the discharging electrode rapidly increases, and at the same time, hydrogen and oxygen gases are formed at the electrode as a result of electrochemical reactions. Ultimately, gases formed by vaporization of water and electrochemical reactions cover the electrode. Since the liquid waste is electrically conductive, it elongates the ground electrode up to the border of the gas layer, where electrical discharge occurs. Without hydrogen peroxide, electrical discharge was able to remove about 50% of Fe(III)-EDTA. As the concentration of hydrogen peroxide added increased, the removal efficiency of Fe(III)-EDTA increased. When the molar ratio of hydrogen peroxide to the initial Fe(III)-EDTA was higher than 24.7, more than 80 g of Fe(III)-EDTA was removed with an energy of 1 kWh. A comparison between tungsten and steel electrodes showed that electrode material did not affect the Fe(III)-EDTA removal. In the present underwater electrical discharge process, the removal of Fe(III)-EDTA was completed within 30 min at molar ratios of hydrogen peroxide to the initial Fe(III)-EDTA higher than 24.7.

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.182-192
• /
• 1999

The new GD/ICP-AES quick change over system has been developed and characterized. Within less than 15 minutes, ICP-AES could be switched to GD-AES and vise a versa. As a result, both solid and liquid samples could be analyzed in a very short period of time by the ICP/GD-AES quick change over system developed in our laboratory. The influences of the experimental variables, such as flow rate of coolant gas, flow rate of auxiliary gas, flow rate of sample carrier gas, sampling depth, orifice size of sampling cone, and rf (radio frequency) power on emission intensity have been presented. The detection limits of Cd(I) 228.8 nm, Mn (II) 257.61 nm, and Fe(II) 259.95 nm were found to be 3.86, 1.49, and 5.79 ppb, respectively. And linealities of the calibration curves were measured to be unity.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.450-455
• /
• 2005

We have studied on operational characteristics of the nitrogen laser with sliding discharge and longitudinal excitation. We could observe radiation of nitrogen laser excited by a sliding discharge along the surface of a dielectric. The shape of the beam was a ring type which had 2 mm or 4mm in diameter depending on the sliding discharge tube shape. In this experiment, We show the possibilities to make other shapes of laser beam, for example, rectangle, ellipse, and to excite another gas laser system like an excimer laser.