• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.12
• /
• pp.453-460
• /
• 2022

As high-performance quantum computers are expected to be developed, studies are being actively conducted to build a post-quantum security system that is safe from potential quantum computer attacks. When the Grover's algorithm, a representative quantum algorithm, is used to search for a secret key in a symmetric key cryptography, there may be a safety problem in that the security strength of the cipher is reduced to the square root. NIST presents the post-quantum security strength estimated based on the cost of the Grover's algorithm required for an attack of the cryptographic algorithm as a post-quantum security requirement for symmetric key cryptography. The estimated cost of Grover's algorithm for the attack of symmetric key cryptography is determined by the quantum circuit complexity of the corresponding encryption algorithm. In this paper, the quantum circuit of the SCHWAEMM algorithm, AEAD family of SPARKLE, which was a finalist in NIST's lightweight cryptography competition, is efficiently implemented, and the quantum cost to apply the Grover's algorithm is analyzed. At this time, the cost according to the CDKM ripple-carry adder and the unbounded Fan-Out adder is compared together. Finally, we evaluate the post-quantum security strength of the lightweight cryptography SPARKLE SCHWAEMM algorithm based on the analyzed cost and NIST's post-quantum security requirements. A quantum programming tool, ProjectQ, is used to implement the quantum circuit and analyze its cost.

• Journal of Korean Elementary Science Education
• /
• v.42 no.1
• /
• pp.17-33
• /
• 2023

This study examined inservice elementary teachers' thoughts on the development of educational apps by preservice elementary teachers and implications for TPACK education for preservice elementary teachers. A case study was conducted in which preservice elementary teachers developed a science education app, and the three teachers were surveyed for their thoughts regarding this. The results regarding the characteristics of the developed app by preservice teachers were as follows. First, "inquiry" had the highest value among educational goals intended by the preservice teachers. In addition, the scores for tool-type apps and apps in which interaction between learners and instructors occurs were relatively high. Second, most of the preservice teachers developed apps to meet curriculum goals, but their apps showed low-level characteristics in terms of the constructive and cooperative dimensions. The results of the analysis of the thinking of elementary school teachers regarding the education development apps are as follows. First, elementary school teachers assigned the lowest scores to the effectiveness of the apps, and to this problem, the achievement standard with respect to the curriculum and the evaluation and modification activities fir the apps were proposed. Second, the teachers indicated that it would be appropriate to provide the experience of making apps to directly improve the TPACK of preservice teachers. Third, the respondents thought that preservice teachers should develop block coding literacy to create apps using App Inventor. Fourth, the teachers considered it necessary to emphasize simulated instructions, as well as the experience of collecting and handling data through apps to improve preservice teachers' TPACK app development for educational use.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.4
• /
• pp.336-359
• /
• 2021

In this study, hybrid CLT research and development trends were analyzed to improve the low rolling shear strength of CLT, a large wooden panel used in high-rise wooden buildings. Through this, basic data that can be used in research and development directions for localization of CLT were prepared. As a way to improve the low rolling shear strength, the use of hardwood lamina, the change of the lamina arrangement angle, and the use of structural composite materials are mainly used. Rolling shear strength and shear modulus of hardwood lamina are more than twice as high as softwood lamina. It confirmed that hardwoods can be used and unused species can be used. Rolling shear strength 1.5 times, shear modulus 8.3 times, bending stiffness 4.1 times improved according to the change of the layer arrangement angle, and the CLT strength was confirmed by reducing the layer arrangement angle. Structural wood-based materials have been improved by up to 1.35 times MOR, 1.5 times MOE, and 1.59 times rolling shear strength when used as laminas. Block shear strength between the layer materials was also secured by 7.0 N/mm², which is the standard for block shear strength. Through the results of previous studies, it was confirmed that the strength performance was improved when a structural wood based materials having a flexural performance of MOE 7.0 GPa and MOR 40.0 MPa or more was used. This was determined based on the strength of layered materials in structural wood-based materials. The optimal method for improving rolling shear strength is judged to be the most advantageous application of structural wood based materials with strength values according to existing specifications. However, additional research is needed on the orientation of CLT lamina arrangement according to the fiber arrangement of structural wood-based materials, and the block shear strength between lamina materials.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.1
• /
• pp.125-134
• /
• 2012

This study is determined by tree vigor of analyzing of each object's growth condition in Locational Characteristics and compare the result with impediment extent rate in crown area to provide the management Study about the influence of man-made structures in numbers of protected trees. 68 places where are in the list of Kimpo protected trees were researched in Natural environments, vital degree of trees, number of trees. Crown area was calculated surveying it around the directions of North, East, South and West branching out. Impediment in the area was analyzed after classified into artificial impediment like paved surface(ascon, concrete, block, etc.), a building and a breast wall and natural impediment like soil, stonework and gravel and conclusions are as follow. In analyzing of natural environments, he ground where protected trees have located is consist of 72.05 of manmade structure and artificial in all. There are many protected trees which have less space than crown area for growth suggested by Woo-kyung Sim and Se-kyun Shin in 1992. And it was analyzed that making growth space for protected trees and management of impediment are urgently needed because of that the proportion of impediment covering the crown area has increased as cities are becoming more urbanized results in transforming of trees and weakness of tree vigor. This research shows that under 20% of in crown area is tree vigor determination 1-2 grade 21-50% under is 2-3 grade, higher than 50% is 3-5 grade. More impediment have more difficulty for growing, with the management of root system of protected trees need to be under 20% of rate of land is necessary was improved. As follows are suggested about the standard of management in artificial impediment which influence the number of trees. Firstly, impediment in crown area must be restricted under 20%, but in case outside of the area is not artificial the rate could be higher considerable. Secondly, protected trees growth space secured as much as crown area and impediment must be installed outside the crown area. Thirdly, to move the protected trees, condition of growth space secure must be considered. Fourthly, to develope land, the area around protected trees should be utilized in a park, the area of impediment installation in crown area should be limited as well. Fifthly, As many shown in previous research, for the improvement of old big trees and protected trees, need the tax favor of landowner and purchase of around land, to manage, it needs the budget of local government and advice of expert. Also the study on how various kind of impediment nearby protected trees influence on them has to be continued.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.46-55
• /
• 2016

This work proposes a 13b 100MS/s 45nm CMOS ADC with a high dynamic performance for IF-domain high-speed signal processing systems based on a four-step pipeline architecture to optimize operating specifications. The SHA employs a wideband high-speed sampling network properly to process high-frequency input signals exceeding a sampling frequency. The SHA and MDACs adopt a two-stage amplifier with a gain-boosting technique to obtain the required high DC gain and the wide signal-swing range, while the amplifier and bias circuits use the same unit-size devices repeatedly to minimize device mismatch. Furthermore, a separate analog power supply voltage for on-chip current and voltage references minimizes performance degradation caused by the undesired noise and interference from adjacent functional blocks during high-speed operation. The proposed ADC occupies an active die area of $0.70mm^2$, based on various process-insensitive layout techniques to minimize the physical process imperfection effects. The prototype ADC in a 45nm CMOS demonstrates a measured DNL and INL within 0.77LSB and 1.57LSB, with a maximum SNDR and SFDR of 64.2dB and 78.4dB at 100MS/s, respectively. The ADC is implemented with long-channel devices rather than minimum channel-length devices available in this CMOS technology to process a wide input range of $2.0V_{PP}$ for the required system and to obtain a high dynamic performance at IF-domain input signal bands. The ADC consumes 425.0mW with a single analog voltage of 2.5V and two digital voltages of 2.5V and 1.1V.

• Journal of Intelligence and Information Systems
• /
• v.25 no.2
• /
• pp.57-75
• /
• 2019

In this paper, we conducted a study focusing on the innovation direction of the documentary model on the Internet of Things industry, which is the most actively industrialized among the core technologies of the 4th Industrial Revolution. Policy, economic, social, and technical issues were derived using PEST analysis for global trend analysis. It also presented future prospects for the Internet of Things industry of ICT-related global research institutes such as Gartner and International Data Corporation. Global research institutes predicted that competition in network technologies will be an issue for industrial Internet (IIoST) and IoT (Internet of Things) based on infrastructure and platforms. As a result of the PEST analysis, developed countries are pushing policies to respond to the fourth industrial revolution through cooperation of private (business/ research institutes) led by the government. It was also in the process of expanding related R&D budgets and establishing related policies in South Korea. On the economic side, the growth tax of the related industries (based on the aggregate value of the market) and the performance of the entity were reviewed. The growth of industries related to the fourth industrial revolution in advanced countries overseas was found to be faster than other industries, while in Korea, the growth of the "technical hardware and equipment" and "communication service" sectors was relatively low among industries related to the fourth industrial revolution. On the social side, it is expected to cause enormous ripple effects across society, largely due to changes in technology and industrial structure, changes in employment structure, changes in job volume, etc. On the technical side, changes were taking place in each industry, representing the health and medical sectors and manufacturing sectors, which were rapidly changing as they merged with the technology of the Fourth Industrial Revolution. In this paper, various management methodologies for innovation of existing business model were reviewed to cope with rapidly changing industrial environment due to the fourth industrial revolution. In addition, four criteria were established to select a management model to cope with the new business environment: 'Applicability', 'Agility', 'Diversity' and 'Connectivity'. The expert survey results in an AHP analysis showing that Business Model Canvas is best suited for business model innovation methodology. The results showed very high importance, 42.5 percent in terms of "Applicability", 48.1 percent in terms of "Agility", 47.6 percent in terms of "diversity" and 42.9 percent in terms of "connectivity." Thus, it was selected as a model that could be diversely applied according to the industrial ecology and paradigm shift. Business Model Canvas is a relatively recent management strategy that identifies the value of a business model through a nine-block approach as a methodology for business model innovation. It identifies the value of a business model through nine block approaches and covers the four key areas of business: customer, order, infrastructure, and business feasibility analysis. In the paper, the expansion and application direction of the nine blocks were presented from the perspective of the IoT company (ICT). In conclusion, the discussion of which Business Model Canvas models will be applied in the ICT convergence industry is described. Based on the nine blocks, if appropriate applications are carried out to suit the characteristics of the target company, various applications are possible, such as integration and removal of five blocks, seven blocks and so on, and segmentation of blocks that fit the characteristics. Future research needs to develop customized business innovation methodologies for Internet of Things companies, or those that are performing Internet-based services. In addition, in this study, the Business Model Canvas model was derived from expert opinion as a useful tool for innovation. For the expansion and demonstration of the research, a study on the usability of presenting detailed implementation strategies, such as various model application cases and application models for actual companies, is needed.