• Fire Science and Engineering
• /
• v.13 no.3
• /
• pp.35-42
• /
• 1999

A occupant load density of contemporary office buildings were surveyed by a building w walk through procedure in Korea. The survey results of ten office buildings are range from 1 2 2 2 213.14 m !person 041.4 ft !person) to 22.69 m /person (244.34 ft !person) with 95% confidence l level and the mean occupant load density is 17.92 m2/person 092.87 ft2/야rson). The impacts of occupant load on evacuation flow time was analyzed by applying time-based egress m model, SIMULEX with various occupant load densities from previous studies. I In order to demonstrate the validation of egress modeling method, fire evacuation exercise a and computer simulation were used to simulate the actual evacuation plan for a high-rise office building. An analysis and comparison of the results of these approaches was made to i illustrate the influence of model limitations on the result of prediction The result of the study shows that the introduction of occupant load concept in building c code of Korea is essential to achieving resonable building life safety design in future.

• Journal of Food Hygiene and Safety
• /
• v.16 no.2
• /
• pp.139-144
• /
• 2001

A 5-day germination test is applicable to detect biological changes in irradiated wheat and barley at low doses. Seeds were irradiated at below 0.5 kGy, husked and placed on distilled water-moistend filter paper in a covered Petri-dish. Water was supplied everyday. To evaluate the growth rate, the length of shoots and roots was measured during germination. In wheat, the shoots of all samples grew well during 5 days, but the shoot length and the daily growth extent decreased with increasing doses. The roots of non-irradiated wheat showed the highest daily growth extent during 5 days and the root length was over 20 mm at 3rd day. In barley, the growth of shoots and roots was retarded at 0.3 kGy or more after 3 days. It was concluded that if the root length was 20mm or longer within 3 days, wheat and barley were identified as non-irradiated. The germination test was proved a promising screening method for the detection of irradiated wheal and barley.

• Journal of KIISE:Software and Applications
• /
• v.30 no.9
• /
• pp.867-875
• /
• 2003

This paper concerns continuous density HMM topology optimization. There have been several researches for HMM topology optimization. BIC (Bayesian Information Criterion) is one of the well known optimization criteria, which assumes statistically well behaved homogeneous model parameters. HMMs, however, are composed of several different kind of parameters to accommodate complex topology, thus BIC's assumption does not hold true for HMMs. Even though BIC reduced the total number of parameters of HMMs, it could not improve the recognition rates. In this paper, we proposed two new model selection criteria, HBIC (HMM-oriented BIC) and BIC_Anti. The former is proposed to improve BIC by estimating model priors separately. The latter is to combine BIC and anti-likelihood to accelerate discrimination power of HMMs. We performed some comparative research on couple of model selection criteria for online handwriting data recognition. We got better recognition results with fewer number of parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.334-343
• /
• 1997

Reference white in color television receiver can be achieved by adjusting the RGB gun current ratio and it is necessary to provide additional gain ratio adjustment for the RGB video signal. Generally, the gun current density profile has a gaussian distribution and the gain-bandwidth product of RGB channel amplifieris constant. Therefore brightness and spatial resolution are changed with variations in reference white of receiver. In this paper, the effect of RGB gun current and channel gain ratios on brightness and resolution of CPT is analyzed. Brightness is increased with the color temperature of referenc white because of Helmholtz-kohlrausch effect. The change in ligh output is more abrupt and spatial resolution is improved with unity current ratio. For more bright and improved ressolution we also present the range of color temperature of reference white for P22 phosphors.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.8
• /
• pp.711-716
• /
• 2003

This paper proposes the method to select the number of optimal mixtures in each state in Continuous Density HMM (Hidden Markov Models), Previously, researchers used the same number of mixture components in each state of HMM regardless spectral characteristic of speaker, To model each speaker as accurately as possible, we propose to use a different number of mixture components for each state, Selection of mixture components considered the probability value of mixture by each state that affects much parameter estimation of continuous density HMM, Also, we use PCA (principal component analysis) to reduce the correlation and obtain the system' stability when it is reduced the number of mixture components, We experiment it when the proposed method used average 10% small mixture components than the conventional HMM, When experiment result is only applied selection of mixture components, the proposed method could get the similar performance, When we used principal component analysis, the feature vector of the 16 order could get the performance decrease of average 0,35% and the 25 order performance improvement of average 0.65%.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.1-15
• /
• 2022

In this study, text analysis was performed on the mealkit product review data to identify factors affecting the evaluation of the mealkit product. The data used for the analysis were collected by scraping 334,498 reviews of mealkit products in Naver shopping site. After preprocessing the text data, wordclouds and sentiment analyses based on word frequency and normalized TF-IDF were performed. Logistic regression model was applied to predict the polarity of reviews on mealkit products. From the logistic regression models derived for each product category, the main factors that caused positive and negative emotions were identified. As a result, it was verified that text analysis can be a useful tool that provides a basis for maximizing positive factors for a specific category, menu, and material and removing negative risk factors when developing a mealkit product.

• Journal of the Korean Geographical Society
• /
• v.47 no.5
• /
• pp.755-774
• /
• 2012

The main objective of the study is to propose GIS-based methods to assess the population distribution criteria for undesirable facilities such as nuclear power plants. First of all, a review of the relevant criteria was conducted for the official documents compiled by such institutions as IAEA (International Atomic Energy Agency), U.S. NRC (Nuclear Regulatory Commission), and some national institutes including the Korea Institute of Nuclear Safety. It is informed from the review that the fundamental principle underlying the various criteria is to maximize the distance between a plant and the nearest population center. It is realized that two interrelated GIS-based techniques need to be devised to put the principle into practice; sophisticated ways of representing population distribution and identifying population centers. A dasymetric areal interpolation is proposed for the former and cell-based and area-based critical density methods are introduced. Grid-based population distributions at various spatial resolutions are created by means of the dasymetric areal interpolation. By applying the critical density methods to the gridded population distribution, some population centers satisfying the population size and density criteria can be identified. These methods were applied to the case of the Gori-1 nuclear power plant and their strengths and limitations were discussed. It was revealed that the assessment results could vary depending upon which method was employed and what values were chosen for various parameters. This study is expected to contribute to foster the applications of methods and techniques developed in geospatial analysis and modeling to the site selection and evaluation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.6
• /
• pp.419-427
• /
• 2005

For the purpose to verify the physico­chemical properties of Korean waxy wheat, comparative analyses between waxy wheat lines and their respective maternal parents were performed on mixing and pasting properties, and flour particle sizes. The particle sizes of waxy wheat flour were significantly larger than those of their parents when milled in a same condition. Although the protein contents of flour in waxy wheat lines tested were high as much as those of bread wheat, the quality parameters showed lower baking uses based on sedimentation volumes and mixing characteristics. Waxy flour required more water than non-waxy flour to obtain the proper mixogram. Waxy wheat flour showed more or less higher onset pasting temperatures and much higher breakdown viscosities than their respective parent flour in the Rapid Viscograph test. Moreover, peak viscosity temperatures and final viscosities were dramatically reduced in waxy wheat lines by showing $79.4 - 81.7^{\circ}C$ and 101 ­116.9 RVU, respectively, compared to their parents in that the temperatures above $95^{\circ}C$ and the viscosity ranges of 148 -171.8 RVU.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.657-664
• /
• 2014

This study is targeted at users of social networks to investigate motives, motives based on information exchange, network density, and reliability of information, recognizing network. Result motivation is a social network analysis of information-seeking motivation, social influence motivation, entertainment motivation, motivation network formation, respectively. Network density is also information seeking motivations, social influence motivation, entertainment showed differences in motivation, information about the reliability of the difference between the difference was in all the motivational factors.

• The Korean Journal of Pesticide Science
• /
• v.13 no.2
• /
• pp.70-78
• /
• 2009

Processing factors of pesticides in milling process of wheat grain, which are consumed and imported at large quantity were examined to establish reasonable MRL of the processed food. Azinphos-methyl, chlorpyrifos, chlorpyrifos-methyl, fenitrothion, malathion, and trichlorfon were selected for the study according to annual usage and the previous detection record in wheat grain. Dipping process for pesticide application was performed in laboratory, while milling process was conducted under pilot plant system. Processing factors were calculated by analyzing residual pesticides on wheat grain and processing products as wheat flour, bran and red dog. Processing factors were 0.05 for azinphos-methyl, 0.06 for chlorpyrifos, 0.05 for chlorpyrifos-methyl, 0.07 for fenitrothion, 0.07 for malathion, 0.06 for trichlorfon, respectively. Recovery test was also performed to establish extraction efficiency of analytical procedure. The recovery value ranged from 93.2% to 98.6% with standard deviation of 0.1-0.9%.