• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.105-112
• /
• 2009

Telemetry data is very important for the Launch Mission and Flight Safety Control during the Space Launch. In Naro Space Center, several telemetry stations such as a small station in the NARO space center, two stations in Jeju and a downrange station on a ship are deployed for the stable acquisition/receiving of the telemetry signals. In this paper, the Link Margin and Reliability for the telemetry are analyzed to evaluate the probability of the signal receiving of each station. Even though the proper analysis is to using the on-board EIRP(Effective Isotropic Radiation Power) values in the direction of the ground station considering the predicted flight trajectory and the locations of the stations, the global EIRP of 95% spatial coverage has been used for the analysis, due to the limitation of the available data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.9-16
• /
• 2018

Predictive control is a very practical method that obtain the current input that minimizes the future errors of the reference command and state by use of the predictive model of the controlled object, and can also consider the constraints of the state and input. Although there have been studies in which predictive control is applied to mobile robots, performance has not been optimized as various control parameters for determining control performance have been arbitrarily specified. In this paper, we apply the genetic algorithm to the trajectory tracking control of a mobile robot with input constraints in order to minimize the trajectory tracking errors through control parameter tuning, and apply the quadratic programming Hildreth method to reflect the input constraints. Through the computer simulation, the superiority of the proposed method is confirmed by comparing with the existing method.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2020

Upper stage of launch vehicle mainly injects a lunar explorer from low earth orbit to the moon at a distance of 380,000 km. In foreign lunar explorer, the upper stage is separated from the explorer after the explorer is injected into the earth-moon transfer trajectory, and the lunar explorer then uses on-board propellant to carry out mid-course correction maneuvers and lunar orbit insertion maneuvers. This study describes a newly presented small liquid upper stage. Using a small liquid upper stage with a wet mass of 2.9 tonnes, the lunar explorer not only can be injected earth-moon transfer trajectory but also can be performed lunar orbit insertion. This study provides acceptable mass range of the lunar explorer and the scope of acceptable mission range also describes based on the launch from Naro Space Center.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.233-238
• /
• 2009

In this paper, we propose the methods to select the stable region for the detect region which is required in the system used the face to the ROI in the auto-focus digital camera. this method regards the face region as the ROI in the progressive input frame and focusing the region in the mobile camera embeded ISP module automatically. The learning algorithm to detect the face is the Adaboost algorithm. we proposed the method to detect the slanted face not participate in the train process and postprocessing method for the results of detection, and then we proposed the stabilization method to sustain the region not shake for the region. we estimated the capability for the stabilization algorithm using the RMS between the trajectory and regression curve.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.247-255
• /
• 2021

Individual passenger transfer information is not included in Seoul metropolitan subway Automatic Fare Collection (AFC) data. Currently, basic data such as travel time and distance are allocated based on the TagIn terminal ID data records of AFC data. As such, knowledge of the actual path taken by passengers is constrained by the fact that transfers are not applied, resulting in overestimation of the transport index. This research proposes a method by which a transit path that connects the TagIn and TagOut terminal IDs in AFC data is determined and applied to the transit index. The method embodies the concept that a passenger's line of travel also accounts for transfers, and can be applied to the transit index. The path selection model for the passenger calculates the line of transit based on travel time minimization, with in-vehicle time, transfer walking time, and vehicle intervals all incorporated into the travel time. Since the proposed method can take into account estimated passenger movement trajectories, transport-related data of each subway organization included in the trajectories can be accurately explained. The research results in a calculation of 1.47 times the values recorded, and this can be evaluated directly in its ability to better represent the transportation policy index.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.134-143
• /
• 2020

With the worldwide spread of African swine fever, interest in livestock epidemics is growing. Livestock transport vehicles are the main cause of the spread of livestock epidemics, but no empirical quarantine procedures and standards related to the mobility of livestock transport vehicles in South Korea. This study extracted livestock-related vehicles' trajectory by utilizing the facility visit history data from the Korea Animal Health Integrated System and the DTG (Digital Tachograph) data from the Korea Transportation Safety Authority and presented them as exposure indexes aggregating the link-time occupancy of each vehicle. As a result, a total of 274,519 livestock-related vehicle trajectories were extracted, and exposure values by link and zone were quantitatively derived. Through this study, it is expected that prior monitoring of livestock transport vehicles and the establishment of post-disaster prevention policies would be provided.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.363-368
• /
• 2010

본 논문은 레미콘 차량의 관제 및 관리, 레미콘 플랜트의 효율적 운영을 위해 시행되고 있는 레미콘차량 관제 시스템의 최적 좌표 전송 주기를 평가하고자 하였다. 이를 위해 실제적으로 레미콘차량 관제 시스템을 운영 중인 레미콘회사를 사례로 2010년 5월 한달 간 운행된 20대의 차량에 30초, 1분, 3분, 5분 간격으로 수신 된 좌표 주기별 거리와 실제로 운행 된 거리를 비교하였다. 또한 최적 좌표전송주기를 평가하기 위해 30초, 1분, 3분, 5분 간격으로 전송되는 주기별 Packet 계산표에 따라 데이터 요금제를 비교 환산하여 비용 대비 최적의 좌표전송주기를 평가 하였다. 그 결과 1분 간격의 송신주기가 오차율이 2.34%, 1일 8시간 운행기준 월 송신요금이 10,000원으로 나타나 가장 합리적으로 분석되었다. 그러나 좌표전송에서 비정상적인 값이 수신 될 경우 그에 대한 방안이내 처리 절차 등의 추가적인 연구의 필요성이 제기된다.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.123-126
• /
• 2003

This paper presents an speed reference trajectory planning methods for vibration suppression in a t-mass resonant system which has a flexible coupling between a load and a driving motor. Due to this flexibility, the system often suffers vibration especially when the motor is controlled for higher speed command. The steady state conditions are utilized to derive desired load speed trajectory which does not cause the torsional vibration. And the desired motor speed trajectory is synthesized base on the relation between load and motor speed. The simulation and experiment result suggest that the proposed method effectively suppress the vibration.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.199-201
• /
• 2006

풍력발전기에 있어서 블레이드의 Yaw방향 제어는 끊임없이 변화하는 풍향에 대해 효율의 극대화와 블레이드의 강도 및 진동측면에서 대단히 중요하다. 기존의 블레이드 Yaw 방향 측정은 접촉 및 비접촉 센서가 이용되어왔다. 본 논문에서는 풍력발전기의 원격모니터링 시스템에서 기본적으로 설치되는 카메라를 이용하여 블레이드의 Yaw방향을 측정하는 방법을 제안한다. 블레이드가 풍향에 따라 회전할 때 영상 누적을 행하고, 누적영상에 대해 경계점을 추정하여 타원의 궤적을 추정한다. 추정된 경계점들을 이용하고 최소자승법을 적용하여 타원방정식을 추정하고, 장축과 단축을 연산한다. 장축과 단축의 변화를 이용하여 카메라의 촬영방향의 기준점으로부터 Yaw방향의 변화를 정량적인 값으로 산출하여 이를 바탕으로 Yaw회전각을 추정한다. Yaw 방향 추정의 검증을 위해 블레이드 속도와 Yaw 방향의 제어가 가능한 모형풍력발전기를 제작하고 실험을 통하여 제안한 추정알고리즘의 유효성을 검증한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1604-1608
• /
• 2008

최근 기상이변 등에 따라 빈번히 발생하는 이상홍수에 대비하여 댐의 안정성 확보를 위한 댐설계기준이 강화되었고, 이에 따라 가능최대홍수량(PMF) 유입시 댐의 항구적인 안전성 확보를 위하여 치수능력 증대사업이 필요하게 되었다. 본 연구에서는 안동댐의 치수능력 증대사업의 일환으로 계획된 비상여수로에 대하여 2차원, 3차원 수치모형실험을 통해 비상여수로의 수리학적 안정성과 기능성을 검토하였다. 최적의 설계안을 결정하는데 필요한 자료를 제공하기 위하여 접근수로의 유황, 월류위어의 방류능력, 급경사수로 및 감세공의 유황을 검토하였다. 특히, 월류위어의 교각형상에 따른 수면형상, 조절부의 제원에 따른 방류량 검토, 조절부의 평면형상에 따른 유황, 급경사수로의 종단경사에 따른 유황, 저유량 방류시 플립버킷부에서의 사출궤적 등에 대한 검토 등을 수행하였다. 본 연구결과, 수치모형실험은 설계자에게 실용적인 해석도구로 사용될 수 있음을 보일 수 있었다.