• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1677-1690
• /
• 1997

Block-transform coding is one of the most popular approaches for image compression. For example, DCT is widely used in the internaltional standards standards such as MPEG-1, MPEG-2, JPEG, and H.261. In the block-based transform coding, blocking artifacts may appear along block boundaries, and they can cause severe image degradation eqpecially when the transform coefficients are coarsely quantized. In this paper, we propose a new method for blocking artifacts reduction in transform-coded images. For blocking artifacts reduction, we add a correction term, on a block basis, composed of a linear combination of 28 basis images that are orthonormal on block boundaries. We select 28 DCT kernel functions of which boundary values are linearly independent, and Gram-Schmidt process is applied to the boundary values in order to obtain 28 boundary-orthonormal basis images. A threshold of bolock discontinuity is introduced for improvement of visual quality by reducing image blurring. We also investigate the number of basis images needed for efficient blocking artifacts reduction when the compression ratio changes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.439-446
• /
• 2019

In this paper, we propose a encryption method using C-MLCA and 1D CAT to secure medical image for efficiently. First, we generate a state transition matrix using a Wolfram rule and create a sequence of maximum length. By operating the complemented vector, it converts an existing sequence to a more complex sequence. Then, we multiply the two sequences by rows and columns to generate C-MLCA basis images of the original image size and go through a XOR operation. Finally, we will get the encrypted image to operate the 1D CAT basis function created by setting the gateway values and the image which is calculated by transform coefficients. By comparing the encrypted image with the original image, we evaluate to analyze the histogram and PSNR. Also, by analyzing NPCR and key space, we confirmed that the proposed encryption method has a high level of stability and security.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.17-25
• /
• 2007

In most electronic imaging applications, image with high resolution(HR) are desired. HR means that pixel density within an image is high, and therefore HR image can offer more details that may be critical in various applications. Digital images that are captured by CCD and CMOS cameras usually have a very low resolution, which significantly limits the performance of image recognition systems. Image super-resolution techniques can be applied to overcome the limits of these imaging systems. Super-resolution techniques have been proposed to increase the resolution by combining information from multiple images. To techniques were consisted of the registration algorithm for estimation and shift, the nearest neighbor interpolation using weight of acquired frames and presented frames. In this paper, it is proposed the image interpolation techniques using the wavelet base function. This is applied to embody a correct edge image and natural image when expend part of the still image by applying the wavelet base function coefficient to the conventional Super-Resolution interpolation method. And the proposal algorithm in this paper is confirmed to improve the image applying the nearest neighbor interpolation algorithm, bilinear interpolation algorithm.,bicubic interpolation algorithm through the computer simulation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.3
• /
• pp.155-162
• /
• 2014

Using an isogeometric approach, a continuum-based shape design optimization method is developed for steady state power flow problems at high frequencies. In case the isogeometric method is employed to the shape design optimization, the NURBS basis functions used in CAD geometric modeling are directly utilized to embed the exact geometry into the computational framework so that the design parameterization for shape optimization is much easier than that in the finite element method and consequently provides the enhanced smoothness of design perturbations. Thus, exact geometric models can be used in both the response and the shape sensitivity analyses, where normal vector and curvature are continuous over the whole design space so that enhanced shape sensitivity can be expected. Through numerical examples, the developed isogeometric sensitivity is compared with finite difference one to provide excellent agreement. Also, it turns out that the proposed method works very well in the shape optimization problems.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.10a
• /
• pp.244.3-245
• /
• 1979

1. 수율계수 함수의 영향 : 유가 배양에 있어서 수율 계수가 제한 기질 농도의 함수일 경우에 대한 연구를 수행하였다. 사용한 수율 계수 함수는 기질 농도에 대하여 선형 함수였으며 목적함수는 중간 대사 물질의 생산량이었다. 1-가) 수율 계수 함수의 기울기가 음의 값으로 적어짐에 따라 제한 기질의 공급속도가 증가되었다. 1-나) 일반적으로 초기의 얼마 동안은 회분 배양에서와 같이 공급 속도가 거의 없었으며 그후 전환점 이후에 가서야 공급 속도가 증가하였다. 1-다) 전환점 이후에서도 처음에는 대부분의 경우에 공급속도가 음의 값으로 부터 시작하여 증가하기 시작하였다. 1-라) 어떤 경우에는 배양 초기부터 공급 속도가 양의 값으로부터 시작하였으나 곧 감소하였다가 다시 증가하는 비 단조형 변화를 보였다. 1-마) 전환점 이후에서 공급 속도가 증가하는 형태에서도 처음에는 선형 증가를 보이다가 나중에 지수적 증가를 보였다. 1-바) 위와 같은 공급 속도의 변화에 따른 발효조 내의 제한 기질 농도의 변화는 초기에는 가능한 최대치를 유지하다가 전환점 이후에는 갑자기 감소하는 형태를 취하였다. 2. 목적 함수의 영향: 목적 함수가 균체량과 생성 중간 대사물질 량의 선형 결합일 때 대하여 연구하였다. 선형 결합 계수로는 균체량과 생성대사 물질의 상대적인 값어치를 취하였다. 2-가) 허용 최대 균체 농도가 제한되어 있는 상황 하에서 생성 대사 물질의 상대적인 값이 증가 할수록 목적 함수가 증가하였다. 2-나)생성대사 물질의 상대적인 값이 증가할수록 전환점의 위치가 줄어들었다. 2-다) 생성대사 물질 상대적 값의 단위 증가에 대한 목적 함수는 균체량을 감안하지 않은 야마네박사의 결과에 수렴하였다. 2-라) 공급 속도는 상대 값이 커질수록 줄어들었다. 2-마) 균체량의 시간에 대한 곡선은 상대값이 증가할수록 감소하고 전형적인 분기점 형태의 변화를 보였다.변이 뚜렷하여 이로 인한 외임파강내의 염증성병변이 뚜렷이 나타나 있으며 와우관의 특히 기저회전에서의 유모세포의 손실이 심한 것으로 보아 중이염으로 인한 골도의 고음역에서의 손실이 발생함을 알 수 있다.A group), vinclozolin, procymidone, tetradifon cypermethrin, 그리고 fenvalerate(B group)에서는 70% 이상의 회수율을 얻었고, 20%의 ethyl acetate/hexane을 사용하여 분석한 경우는 5%나 10%의 ethyl acetate/hexane을 사용하여 분석했을 때보다 좋은 결과를 나타내어 전체 16종의 농약 중 14종에서 75% 이상의 회수율을 얻었으나, alachlor와 bifenthrin은 매우 낮은 회수율을 보여서 ethyl acetate와 hexane의 혼합용매가 이들 두 농약성분의 분석에는 적합하지 않은 용출 용매임을 알 수 있었다.NO_2의$ 급성 중독증상으로서는 눈, 코를 강하게 자극하고 폐충혈, 폐수종, 기관지염, 폐염 등을 일으킨다. 만성 중독시에는 만성폐섬유와 및 폐수종을 일으킨다. (4) $오존(O_3)$ Ozone은 자동차 배기가스에서 나오는 $NO_2$ gas 및 탄화수소와 작용하여, PAN이라는 자극성 물질을 생성시키는 광학적 Smog의 주요소로 알려져 있다. 자극적인 냄새가 있음으로 불쾌감을 주고 비, 인후점막의 전조감과 두통이 오며 폐기능을 저하시키며 더욱 진행되면 폐충혈, 폐수종 등을 일으킨다 (5) Smog에 의한 건강피해 대표적인 것이 1952.12.5~12.8까지 4일간 영국 Lon-don에서 계속된 Smog사건이며, 이 사건으로 말미암아 호흡기질환 사망율이 사건전보다 사건기간 중 혹은 사건후에 5~10배의 증가율을 보였다. 이때 Smog의 주원인은 연료의 불완전 연소에 의한 연기와 이때 발생

• Water for future
• /
• v.19 no.2
• /
• pp.157-166
• /
• 1986

The objective of this study was to determine the best representative synthetic unit hydrograph that is applicable to ungaged small watershed. A typical unit hydrograph was established with the actual data from a small watershed. Four currently well-known methods for analyzing ungaged small watershed, including Snyder's, Clark's S.C.S. and Nash methods, were evaluated with the data from the same small watershed. The following observations were noted from the analysis of four methods. The Snyder's method yielded the similar peak discharge value as the typical unit hydrograph. With co-ordinates of three discharge values, i.e. 25%, 50% and 75% of peak discharge, were not adequate for deriving a typical unit hydrograph in ungaged small watershed. With Clark's method there shall be some way of obtaining the exact base length of time area diagram and isochrone of each reach of the stream. With Nash method peak discharge and base flow time are affected by the storage constant and gamma function argument; therefore, for deriving a more reliable and workable unit hydrograph one needs to select for the better estimation of storage constant and gamma function argument. In S.C.S. method peak discharge is directly related to the watershed area and inversely related to the time of peak diacharge. Therefore area with faster peak discharge yielded the higer peak discharge value. Although the peak discharge value obtained frome the S.C.S. method higher than the value obtained from the unit hydrograph developed from the actual data, this method contains a number of advantageous factors. The peak discharge value and the time of peak discharge can be claculated easity from the morphological characteristics of the watershed, and in S.C.S method co-ordinates of the unit hydrograph can be calculated easily from that of the dimensionless unit hydrograph. When the four currently used methods were evaluated with a typical unit hydrograph obtained from the actual data, the S.C.S method was show to be the best method in deriving a synthetic unit hydrograph for ungaged small watershed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.1
• /
• pp.67-75
• /
• 2022

When acquiring a product having an OS, it is very important to identify the exact kernel version of the OS. This is because the product's administrator needs to keep checking whether a new vulnerability is found in the kernel version. Also, if there is an acquisition requirement for exclusion or inclusion of a specific kernel version, the kernel identification becomes critical to the acquisition decision. In the case of the Linux kernel used in various equipment, sometimes it becomes difficult to pinpoint the device's exact version. The reason is that many manufacturers often modify the kernel to produce their own firmware optimized for their device. Furthermore, if a kernel patch is applied to the modified kernel, it will be very different from its base kernel. Therefore, it is hard to identify the Linux kernel accurately by simple methods such as a specific file existence test. In this paper, we propose a static method to classify a specific kernel version by analyzing function names stored in the symbol table. In an experiment with 100 Linux devices, we correctly identified the Linux kernel version with 99% accuracy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.873-880
• /
• 2020

The proposed encryption algorithm strengthens its security by converting pixel-specific values and changing pixel positions. The state transition matrix created by Wolfram's rule creates a complemented CA sequence with the maximum length. Then, we convert the sequence into a 2D basis image and go through a XOR operation with the original image. The final encrypted image is created by shear stressing and rearranging. The image stability analysis verified that the proposed encryption method has high security.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1059-1068
• /
• 1993

We will put the emphasis on the analysis of arbitrarily shaped microstrip antennas. The most general and rigorous treatment of microstrip antennas is given by the electric field integral equation(EFIE), usally formulated in the spectral domain. In this paper, we use a modification of EFIE, called the mixed potential integral equation(MPIE) , and we solve it in the space domain. This technique uses Green's functions associated with the scalar and vector potential which are calculated by using stratified media theory and are expressed as Sommerfeld integrals. The integral equation is solved by a moment's method using rooftop subsectional basis function. Thus, microstrip patches of any shape can be analysed at any frequency and for any substrate. Numerical results for a rectangular patch and for a L-shaped patch are given and compared with measured values.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.248-255
• /
• 2004

In this study, aerodynamic shape design of airfoils was performed by using RSM(response surface method) and two-dimensional Navier-Stokes solver. Numerical experiment points were determined by D-optimal method and quadratic response surfaces were constructed by using JMP. For the validations of design method, NACA 64621 airfoil was inversely designed to have aerodynamic characteristics of Bell airfoil. The design method was applied to the aerodynamic design of both smart UAV wing airfoil and low Reynolds rotor-blade airfoil for unmanned helicopter. The optimized airfoils showed improved performance with various constraint conditions.