• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.489-495
• /
• 2023

In this study, we detected the presence of residual pesticides in 341 agricultural products collected from local food outlets in western Gyeonggi Province. Residual pesticides were detected in 105 (30.8%) samples. Six samples exceeded the legal limits for residual pesticides, resulting in a non-compliance rate of 1.8%, which was slightly higher than the average non-compliance rate of 1.4% in the last three years. Among the tested agricultural products, only fruits and vegetables were found to have pesticide residues, with 24 of 34 fruits (a detection rate of 70.6%) and 81 of 277 vegetables (a detection rate of 29.2%) testing positive. In total, 59 types of pesticides, including acetamiprid, which was detected 208 times, were detected and had a detection range of 0.01-2.38 mg/kg. Among the 105 agricultural products containing pesticide residues, a single pesticide was detected in 62 samples (59%) and two or more pesticides were detected in 43 samples (41%). In particular, 14 pesticides were detected in the same sample of peaches; dinotefuran was detected 21 times. Upon examining the toxicity of the detected pesticides, Class III pesticides (moderate toxicity) were detected 44 times (21.2%) and Class IV pesticides (low toxicity) were detected 164 times (78.8%). Class I, II, and III pesticides with fish toxicity were detected 68 (32.7%), 14 (6.7%), and 126 times (60.6%), respectively. Upon examining the exposure to high-frequency pesticide components detected five or more times, the hazard index was found to be ≤2.8%. Accordingly, the hazard of residual pesticides based on dietary intake was deemed insignificant.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.3
• /
• pp.19-29
• /
• 2023

This study investigated effect of water temperature change on the formation and release of conchospores of Neopyropia yezoensis. We observed that conchocelis growth and conchospores formation in oyster shell at labolatory during 7 weeks. In order to investigate the amount of conchospore formation in oyster shells, which was being cultured at 28℃, was moved to 10℃, 18℃, 28℃, and culture during 6 weeks. At 10℃, we observed an average of 127 for 1 week, 127 for 2 weeks, 95 for 3 weeks, 90 for 4 weeks, 76 for 5 weeks, and 75 for 6 weeks. At 18℃, we observed an average of 141 for 1 week, 135 for 2 weeks, 94 for 3 weeks, 153 for 4 weeks, 162 for 5 weeks, and 2 for 6 weeks. At 28℃, we observed an average of 167 for 1 week, 102 for 2 weeks, 148 for 3 weeks, 157 for 4 weeks, 270 for 5 weeks, and 138 for 6 weeks. Conchospores released from the shell grew into a young thalli in the culture for 6 weeks, and the number of ones was counted. The number of young thalli were investigated at 10℃, 0 for 1 week, 189 for 2 weeks, 200 for 3 weeks, 89 for 4 weeks, 56 for 5 weeks and 27 for 6 weeks. At 18℃, It observed 0 for 1 week, 26 for 2 weeks, 546 for 3 weeks, 16 for 4 weeks, 17 for 5 weeks and 154 for 6 weeks. It was not observed at 28℃.

• Korean Journal of Poultry Science
• /
• v.50 no.3
• /
• pp.133-141
• /
• 2023

We conducted a 5 × 5 diallel cross-combination test using 1,060 chickens from pure lines of Korean Rhode-C, -D, Korean Leghorn-F, -K, and Korean Native Yellowish-brown chicken (KNC-Y) to develop a new Korean native chicken layer breeder. The laying performance and combining ability, including livability, body weight, age of first egg-laying, hen-day egg production, and egg weight, were analyzed. The livability from birth to 48 weeks was 72.1±24.0%, with the highest observed in the YC and the lowest in the DK combination (P<0.01). The YC combination exhibited the highest general combining ability (GCA), while the YD combination showed the highest specific combining ability (SCA). Regarding body weight, combinations involving Leghorn showed lighter weights compared to combinations with Rhode and KNC-Y (P<0.01). Additionally, the offspring from the KNC-Y combination reached sexual maturity earlier than those from the Rhode combination. The hen-day egg production was 70.7±12.0%, with the highest seen in the CK combination at 86% (P<0.01). The effects of GCA and SCA on hen-day egg production were similar, with the SCA being highest in the YD combination and the GCA being highest in the Rhode-C. Significant differences in egg weight were observed among the combinations, with the eggs from Rhode and Leghorn combinations being heavier than those from combinations with KNC-Y (P<0.01). In conclusion, the YC and YD combinations, characterized by excellent livability, are highly desirable paternal strains, while the CF and CK combinations, with excellent laying performance and moderate egg weight, are preferred maternal strains for Korean native chicken layer breeders.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.903-909
• /
• 2023

The purpose of this study is to compare and analyze the effect of changes in the patient's central position on the exposure dose and image quality of surrounding organs during a chest lateral examination using an Auto Exposure Control(AEC). The experiment was conducted on a human body phantom. A needle was attached to the lower part of the center of the coronal plane of the phantom, and a lead ruler was attached to the lower part of the detector so that the 50 cm point was located at the lower center of the AEC ion chamber. The exposure conditions were 125 kVp, 320 mA, the distance between the source and the image receptor was 180 cm, and the exposure field size was 14 × 17 inches. Only one AEC ion chamber was used at the bottom center, and the density was set to '0' and sensitivity to 'Middle', and the central X-ray was incident vertically toward the 6th thoracic vertebra. With AEC mode applied, the 50 cm point of the needle and lead ruler were aligned and the phantom was moved 5 cm toward the stomach (F5) and 5 cm toward the back (B5), and the dose factor was analyzed by measuring ESD. The ESD of the thyroid gland according to the change in patient center position was 232.60±2.20 μGy for Center, 231.22±1.53 μGy for F5, and 184.37±1.19 μGy for B5, and the ESD of the breast was 288.54±3.03 μGy for Center, F5 was 260.97±1.93 μGy, B5 was 229.80±1.62 μGy, and the ESD of the center of the lung was 337.02±3.25 μGy for Center, F5 was 336.09±2.29 μGy, and B5 was 261.76±1.68 μGy. As a result of comparing the average values of dose factors between each group, the difference in average values was statistically significant (p<0.01), and each group appeared to be independent. As a result of the study, there was no significant difference in the dose to the thyroid, breast, and center of the lung according to the change in the patient's central position, except for the breast (10%) when the patient moved forward about 5 cm. However, movement of about 5 cm posteriorly resulted in an average dose reduction of 23.7%. Additionally, when the patient's central position was moved to the rear, image quality deteriorated.

• Korea Trade Review
• /
• v.48 no.3
• /
• pp.217-242
• /
• 2023

This study aims to analyze the factors influencing the logistics demand of inland ports along the Yangtze River and predict future port logistics demand based on these factors. The logistics demand prediction using system dynamics techniques was conducted for a total of six ports, including Chongqing and Yibin ports in the upper reaches, Jingzhou and Wuhan ports in the middle reaches, and Nanjing and Suzhou ports in the lower reaches of the Yangtze River. The logistics demand for all ports showed an increasing trend in the mid-term prediction until 2026. The logistics demand of Chongqing port was mainly influenced by the scale of the hinterland economy, while Yibin port appeared to heavily rely on the level of port automation. In the case of the upper and middle reach ports, logistics demand increased as the energy consumption of the hinterland increased and the air pollution situation worsened. The logistics demand of the middle reach ports was greatly influenced by the hinterland infrastructure, while the lower reach ports were sensitive to changes in the urban construction area. According to the sensitivity analysis, the logistics demand of ports relying on large cities was relatively stable against the increase and decrease of influential factors, while ports with smaller hinterland city scales reacted sensitively to changes in influential factors. Therefore, a strategy should be established to strengthen policy support for Chongqing port as the core port of the upper Yangtze River and have surrounding ports play a supporting role for Chongqing port. The upper reach ports need to play a supporting role for Chongqing port and consider measures to enhance connections with middle and lower reach ports and promote the port industry. The development strategy for inland ports along the Yangtze River suggests the establishment of direct routes and expansion of the transportation network for South Korean ports and stakeholders. It can suggest expanding the hinterland network and building an efficient transportation system linked with the logistics hub. Through cooperation, logistics efficiency can be enhanced in both regions, which will contribute to strengthening the international position and competitiveness of each port.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.54-70
• /
• 2023

Surveys and studies on cultural assets using LiDAR measurement are already active overseas. Recently, awareness of the advantages and availability of LiDAR measurement has increased in Korea, and cases of using it for surveys of cultural assets are gradually increasing. However, it is usually restricted to surveys of mountain fortresses and is not actively used for surveys of ancient tombs yet. Therefore, this study intends to emphasize the need to secure fundamental data from LiDAR measurement for the era from the Three Kingdoms to Unified Silla in which recovery, maintenance, etc., in addition to the actual surveys, are unfulfilled due to the sites being mainly distributed in mountainous areas. For this, LiDAR measurement was executed for the area of Jangsan Ancient Tombs and Chunghyo-dong Ancient Tombs in Seoak-dong, Gyeongju, to review the distribution and geographical conditions of ancient tombs. As a result, in the Jangsan Ancient Tombs, in which a precision archaeological (measurement) survey was already executed, detailed geographic information and distribution conditions could be additionally identified, which could not be known only with the layout indicated by the topographic map of the existing report. Also, in the Chunghyo-dong Ancient Tombs, in which an additional survey was not conducted after 10 tombs were found during the Japanese colonial period, the location of the ancient tombs initially excavated was accurately identified, and the status and additional information was acquired, such as on the conditions of ancient tombs not surveyed. Such information may also be used as fundamental data for the preservation and maintenance of future ancient tombs in addition to the survey and study of the ancient tombs themselves. LiDAR measurement is most effective for identifying the condition of ancient tombs in mountainous areas where observation is difficult or access is limited due to the forest zone. It may be executed before on-site surveys, such as archaeological surveys, to secure data with high availability as prior surveys or pre-surveys. Therefore, it is necessary to secure fundamental data from LiDAR measurement in future surveys of ancient tombs and to establish a survey and maintenance/utilization plan based on this. To establish survey/study and preservation/maintenance measures for ancient tombs located in mountainous areas, a precision archaeological survey is currently executed to draw up a distribution chart of ancient tombs. If LiDAR measurement data is secured before this and used, a more effective and accurate distribution chart can be drawn up, and the actual conditions can be identified. Also, most omissions or errors in information can be prevented in on-site surveys of large regions. Therefore, it is necessary to accumulate fundamental data by actively using LiDAR measurement in future surveys of ancient tombs.

• Analytical Science and Technology
• /
• v.36 no.6
• /
• pp.267-280
• /
• 2023

This study investigated the contents of Pb, Cd, As, and Hg for 4333 samples with 2 09 types of herbal medicines distributed in Seoul area from 2019 to 2021, and evaluated risk assessment according to medicinal part used and origin. The contents of heavy metals were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) and mercury analyzer. The average contents (mg/kg) of heavy metals by medicinal parts were 0.123 to 1.290 for Pb, 0.018 to 0.131 for Cd, 0.034 to 0.290 for As, and 0.003 to 0.015 for Hg. The contents of Pb were higher in Leaves and Whole Herbs (above-ground part) than underground part (Radix & Rhizoma) (ANOVA-test, p < 0.05). The contents of Cd were high in Leaves, Radix & Rhizoma, and Stems & Woods (ANOVA-test, p <0 .05), and exceeded regulatory limits in various types. Levels of Pb, Cd concentrations exceeding regulatory limits were observed in 8, 22 samples (8, 14 types). No sample exceeded regulatory limits of As and Hg. In the comparison between countries of origin, the contents of Cd, As, and Hg were high in imported herbal medicines (t-test, p < 0.05). As a result of the risk assessment, except for Thujae Orientalis Folium and Spirodelae Herba, the MOE values of Pb were all 1 or more, and most samples were safe. The Hazard Index (HI) for Cd, As, and Hg were evaluated to be less than 100 % even if the risk (%) of each heavy metal was added, and the risk from taking herbal medicines was evaluated to be safe.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.561-573
• /
• 2023

National forests have an advantage over private forests in terms of higher investment in capital, technology, and labor, allowing for more intensive management. As such, national forests are expected to serve not only as a strategic reserve of forest resources to address the long-term demand for timber but also to stably perform various essential forest functions demanded by society. However, most forest stands in the current national forests belong to the fourth age class or above, indicating an imminent timber harvesting period amid an imbalanced age class structure. Therefore, if timber harvesting is not conducted based on systematic management planning, it will become difficult to ensure the continuity of the national forests' diverse functions. This study was conducted to determine the optimal volume of timber production in the national forests to improve the age-class structure while sustainably maintaining their economic and public functions. To achieve this, the study first identified areas within the national forests suitable for timber production. Subsequently, a forest management planning model was developed using multi-objective linear programming, taking into account both the national forests' economic role and their public benefits. The findings suggest that approximately 488,000 hectares within the national forests are suitable for timber production. By focusing on management of these areas, it is possible to not only improve the age-class distribution but also to sustainably uphold the forests' public benefits. Furthermore, the potential volume of timber production from the national forests for the next 100 years would be around 2 million m³ per year, constituting about 44% of the annual domestic timber supply.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.132-158
• /
• 2023

The five-story and seven-story stone pagodas at Cheongnyangsaji temple site in Gongju are located under the Sambulbong peak of Gyeryongsan mountain, and are known to have been built of the middle in Goryeo dynasty. As the two pagodas in which two types of Baekje stone pagoda coexist in one era, their historical and academic value are recognized. The seven-story pagoda was overturned by robbery in 1944, and as a result, the five-story pagoda was tilted. Although the two pagodas were restored in 1961, structural instability was continuously raised. In this study, measurement data accumulated from May 2021 to March 2022, and seasonal characteristics were reviewed, and the micro behavior of pagodas were analyzed according to temperature and precipitation during the same period. As a result, the micro thermoelastic behavior was repeated according to the daily temperature change in all sensors, and both the slope and the displacement showed microscale behavior. In the inclinometer, moisture containing the surface and inside of the stones repeated expansion and contraction due to temperature change, showing the micro movements. In particular, the upper part of the five-story pagoda moved up to 3.89° to the northwest, and the seven-story pagoda tilted up to 0.078° to the northeast. The maximum displacements were recorded as 0.127 and 0.149 mm in the five-story and the seven-story pagoda, respectively. These values tended to return to the original position at the end of the measurement, but did not recover completely, indicating a state requiring precise monitoring. The result obtained through the study can be used as basic data for the stable conservation of the two stone pagodas. Based on the behavioral characteristics considering various environmental factors should be analyzed, and the preventive conservation through the maintenance of measurement system built this time should be continued.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.94-108
• /
• 2023

Onyanghaenggung Palace(temporary palace at Onyang) is an important cultural heritage that can substantially confirm the king's onhaeng(溫行) base on literature records such as <Ongungyeonggoedae(溫宮靈槐臺)>, <Oncheonhaenggungdo(溫泉行宮圖)> of 『Ongungsasil(溫宮事實)』『, Younggoedaegi(靈槐臺記)』and cultural property such as Yeonggoedae(靈槐臺) and Shinjeong Monument(神井碑). As the Onyang Tourist Hotel is located in the presumed site of the Onyanghaenggung Palace, even the identity of the Onyanghaenggung Palace site is being threatened without restoration efforts. The purpose of this study is to estimate the location of Onyanghaenggung Palace based on <Oncheonhaenggungdo> before the damages during the Japanese colonial period. To achieve these purposes, records related to Onhaeng during successive kings' terms in the Joseon Dynasty are first reviewed, before changes in the architecture of Onyanghaenggung Palace that took place in the Joseon Dynasty and damage suffered during the Japanese colonial period are summarized, and finally <Oncheonhaenggungdo>, <Eupji>, <Ancient Maps>, <Jijeokwondo> are reviewed. Based on these processes, the location of Onyanghaenggung Palace is estimated by comparing the current Onyang Tourist Hotel and the surrounding area. The results of this study are as follows. First, if the 1,758 cheok(尺) of 「Onyanggun eupji」 and 「Hoseo eupji」 are converted in Jucheok(周尺), the scope of Onyanghaenggung Palace is close to the inner circumference of the site(垈) in Jijeokwondo(1914). Second, the streamlet leading to Oncheoncheon(溫泉川) from the southern side of Onyanggwan(溫陽館), the hot spring hole in use of <Distribution Map of Hot Spring(溫泉分布見取圖)>(1925, 1928), and considering the relationship of the inner east gate(內東門), Bigak(碑閣), Sinjeong(神井) of <Oncheonhaenggungdo>, the building of Hermann Gustav Theodor Sander and the Copyright Commission's Onyang Hot Springs photograph can be estimated as the Onyanghaenggung Palace Hot-spring, namely Tangsil(湯室). Third, in the process of developing to amusement park, the transfer and relocation of the Yeonggaedae site(a governmentowned property) was requested by Gyeongnam Railway Company, but Chungcheongnam-do denied transfer and relocation of the Yeonggaedae because of the importance in the history of Onyang Hot Springs, so the government-owned Yeonggaedae Monument site were permanently preserved at the current location together with the hoe tree(Sophora japonica L.). Also, Yeonggoedae in <Tourists Attractions around Gyeongnam Railway in Joseon (朝鮮京南鐵道沿線名所交通図絵)> (1929) is shown to exist in its current location, and it can be seen that the Shinjeong Monument Pavilion was moved to the front of Shinjeonggwan (神井館). Based on the circumference of Onyanghaenggung Palace, the location of Onyanghaenggung Palace Hot Spring (Tangsil) and Yeonggaedae Monument Pavilion, changes in roads and lots of land during the Japanese colonial period and the modern period, as well as the location of Onyanghaenggung Palace and other major buildings, can be estimated to extend to the current Shimin-ro and Onyang Hot Spring Market.