• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.34-42
• /
• 2007

In this paper, we propose a staff-line detection and removal algorithm from a music score image obtained by a mobile phone camera. As a preprocessing technique to recognize a music score image, staff-line detection and removal should be efficiently applied to the skewed or curved images. The proposed method detects a staff-line by dividing a staff according to the degree of distortion. The number of division is calculated by dividing a staff repletely until an average of differences of y coordinates in every divided position is smaller than a threshold. Therefore, the number of division can be adaptively estimated according to the degree of the distortion. For an experiment, we make various kinds of images by rotating one from $1^{\circ}\;to\;3^{\circ}$ or curving slightly upward. The results show that the proposed method performed well on the experiment images.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.3 s.35
• /
• pp.143-150
• /
• 2005

Camera image is very sensitive to illumination that result in difficulties for recognizing character. Also Camera captured document images have not only skew but also vignetting effect and geometric distortion. Vignetting effect make it difficult to separate characters from the document images. Geometric distortion, occurred by the mismatch of angle and center position between the document image and the camera, make the shape of characters to be distorted, so that the character recognition is more difficult than the case of using scanner. In this paper, we propose a method that can increase the performance of character recognition by correcting the geometric distortion of document images using a linear approximation which changes the quadrilateral region to the rectangle one. The proposed method also determine the quadrilateral transform region automatically, using the alignment of character lines and the skewed angles of characters located in the edges of each character line. Proposed method, therefore, can correct the geometric distortion without getting positional information from camera.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.4
• /
• pp.40-47
• /
• 1997

This paper proposes a method using the straight line Hough transform(SLHT) that recognizes the position of DNA band images from the scanner. The method also detects and corrects automatically the leaning angle of the image. After binarization of a gray-scale DNA band images, the SLHT detects line components involved in the image and recognizes the position of the image using the cross paints of the line components assuming the image is in retangular shape. To improve efficiency of reading many IINA band images through the scanner, this method finds and corrects the leaning angle accurately as less than -t I degree.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.393-399
• /
• 1997

This study proposes a methodology with which the optimal damper positions of the feeding system in a CD-ROM drive are determined to removal the harmful tilting vibration modes. For this purpose, vibration characteristics of the feeding system are identified by a theoretical modeling as well as vibration experiments. We perform the modal testings using the impact hammer and shaker; furthermore, we establish a vibration model due to the rigid-body motion. The analysis and experiments show that the feeding system has three rigid-body vibration modes in the low-frequency region and two of them come from the tilting modes. We show that the tilting modes can be removed by determining the damper positions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.43-46
• /
• 2000

Optical triangulation displacement sensors(0TDSs) are widely used for their simple struchlre, high resolution, and long operating range. However, there are several factors that must be taken into account in order to obtain high accuracy and reliability Measurement errors from inclinations a？ an object surface, prohe signal fluctuations generated by speckle effects. power vanation of a light source, electronic noises, and so on. Previous models of OTDSs can not show reasonable behavior as change of surface inclination and shape of light intensity distribution on the detector. In this paper, we propose a new and reasonable modeling for diffise-type OTDSs based on a geometrical optics. To verify propriety of new modeling, we take basic experiments. Shape of light intensity distribution is asymmetric in both simulation result and experimental result. Both simulation result and experimental result show same tendency of light intensity distribution movement as changing surface inclination

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.338-344
• /
• 2003

The seismic analysis method of spent fuel storage structures for PHWR plant is introduced in comparison with the method for PWR plant. Investigating the structural characteristics of the storage structures, the former is vertically stacked fuel storage trays, while the latter is welded honeycomb type structure. However, as both structures are submerged and free standing, the analysis methods to anticipate the seismic response of both structures are complicated. For the better estimation of actual seismic response, how to model the dynamic properties and the structural behaviour is the key issue. In this paper, the overall procedures of the seismic modelling and stability check for seismic sliding and overturning of the two different storage structures are discussed in the viewpoint of analysis reliability

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.436-438
• /
• 2001

본 논문에서는 기울어진 얼굴 영상에서 얼굴 구성 요소를 추출하는 방법을 제안한다. 제안하는 방법은 먼저 피부 색상 정보를 이용하여 얼굴 후보 영역을 추출한다. 이때 YIQ 색상 좌표계를 이용하고 조명의 영향을 반영하기 위하여 피부색상 영역을 다단계로 분할하여 색상 영역을 각각 결정한 뒤 적중률을 계산하여 얼굴 후보 영역을 결정하는 방법을 제안하였다. 2단계에서는 얼굴의 구성 요소중 가장 두드러진 특징인 눈동자 영역을 기준으로 한국인의 표준 얼굴 통계치를 적응하여 탐색하는 방법을 사용하였다. 이때 탐색된 눈동자 좌표로부터 얼굴의 기울기를 추정한다. 다음 단계에서는 얼굴 후보 영역에 대하여 기울어짐 보정을 수행한 뒤, 수평 수직 투영값을 이용하여 얼굴의 구성요소를 탐색한 뒤 얼굴 포함 최소 사각형을 정의하였다. 마지막으로 얼굴 영상 데이터 베이스로부터 얼굴 포함 최소 사각형에 대한 명암값 표준템플릿을 정의하고, 입력 영상에서 탐색된 최소 포함 사각형에 대하여 얼굴 영역 검증하는 방법을 제안하였다.

• Nuclear Engineering and Technology
• /
• v.27 no.1
• /
• pp.133-140
• /
• 1995

본 논문은 가압경수형 원자력발전소내 비고정식 고밀도 사용후 핵연료 저장대의 지진해석을 수행하기 위해 현재 사용되고 있는 해석방법을 검토하고 있다. 석기서는 영광 3, 4호기 및 울진 3, 4호기 계통설계 경험을 통해 한국원자력 연구소가 보유하게 된 해석 기술을 근거로 하여 해석과정과 모델방법 등을 논의하였다. 비고정식 사용후 핵연료 저장대의 해석은 냉각수에 의한 수력학적 커플링 효과, 핵연료와 중성자 흡수체 및 저장대 구조물 사이의 간극에 의한 충돌, 마찰효과, 그리고 강체 미끌어짐 및 기울어짐 등의 복잡한 현상들을 고려해야 한다. 이러한 모델링 변수들에 대하여 현재의 방법과 규제기관의 추천사항을 비교, 검토하였으며 해석방법 개선 및 최근의 기술적 관심사항들에 대하여 논의하였다.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.60-64
• /
• 2010

The purpose of this study if to prevent dangerous accident of the overthrow of the tower crane in summer's hurricane. We develop the SMS in order to give automatic alarm system to operator within the dangerous range and to give a information of the exactly slope in the real time. The slope value of the tower crane is compose of direction, pitch by the front and rear, roll by the right and left and synthesis by the its pitch and roll. Especially, the synthesis eliminate the effect of the wall tie or wire bracing. So, this value should correctly indicate the actual slope. In this study, more applying field test should be applied with the SMS. In the future, a more measurement device can be applied to, and be able to feed more alarm criteria for the review of the risk in the field.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.263-266
• /
• 2010

비정형 형상의 초고층 건물이 증가함에 따라, 설계 시공 계획 단계에서의 시공 중 건물의 구조적 안정성 검토가 핵심 사항으로 부각되고 있다. 시공 중 비정형 초고층 건물의 안정성을 확보하기 위해서는, 횡력저항시스템이 완전히 형성되기 전 구조체 자중의 불균형 분포에 의해 발생하는 수직부재의 불균등 축소, 골조의 기울어짐 혹은 횡변위 등이 시공단계해석에 의하여 검토되어야 하며, 시공단계해석은 구조건전성모니터링, 시공 보정 프로그램, 시공계획 수립 등과 체계적으로 결합되어 진행되어야 한다. 이 논문은 시공 중 비정형 초고층 건물의 구조 안정성 검토를 위하여, 실제 비정형 초고층 프로젝트에 시공단계해석을 적용하였으며, 시공 중 초고층 건물의 안정성 확보를 위한 주요 검토 항목 및 방법을 제시하였다.