• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.368-370
• /
• 2012

본 논문에서는 이중 홉 무선 네트워크에서 누적분포함수(cumulative distribution function) 기반 중계기 선택 기법을 제안한다. 제안된 기법은 수신 신호대잡음비(signal-to-noise ratio)의 누적분포함수 값에 따라 중계기를 선택한다. 본 논문에서는 제안한 기법의 중계기 공정성에 대한 분석을 통해 제안된 기법이 엄격하게 공정성을 달성할 수 있음을 보인다. 그리고 모의 실험에서는 round-robin 기법과 기회적 중계 기법을 제안된 기법과 총 타임 슬롯에 대한 각 중계기별 타임 슬롯 분배율, 평균 공정성, 불능확률 비교를 통해 제안된 기법이 엄격하게 공정성을 달성하는 것과, 기회적 중계 기법과 거의 동일한 기울기로 불능확률이 떨어지는 것을 확인한다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.364-367
• /
• 2006

음성신호를 관찰하였을 때 성문특성으로 인해서 고주파 쪽 특성이 약화되는 경향이 있다. 약화된 고주파 특성을 보상하기 위하여 프리 엠퍼시스 필터를 통해 보상하고 있다. 프리 엠퍼시스 필터를 간단한 수식으로 표현하면 y(n)=s(n)-As(n-1)와 같이 차분 방정식으로 나타낼 수 있다. 여기서 A값은 보통 0.9에서 1사이의 값을 사용한다. 본 논문에서는 QMF 필터를 이용하여 입력신호를 고주파와 저주파의 2개의 대역으로 분할하여 각 밴드에 프리 엠퍼시스 필터를 적용하여 약화되어진 특성을 정확히 보상하는 방법을 제안한다.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.251-258
• /
• 1974

The rate constants for the nucleophilic substitution reactions of substituted benzoyl chlorides with p-nitroaniline in such solvents as acetone, acetonitrile, methanol, ethanol, etc. were conductometrically determined, and the activation thermodynamic parameters were also evaluated. In result, the reaction rates were faster in protic solvents than in aprotic solvent; in the solvents of similar property, the reaction rate in the solvent of the large dielectric constant was faster than that in the solvent of the small dielectric constant. Hammett plots in individual solvents showed the straight lines with positive slope; and we concluded that the reaction occurred via the addition-elimination mechanism.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.237-245
• /
• 1993

A nonparametric test for the parallelisim of k regression lines against ordered alternatives is proposed. The test statistic is weighted Jonckheere-type statistic applied to slope estimators obtained from each lines. The distribution of the proposed test statistic is asymptotically distribution-free. From the viewpoint of efficiencies, the proposed test desirable properties and is more efficient than the other nonparametric tests.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.83-86
• /
• 2003

SKD11은 자이로 펌프의 로타와 붓싱 재질로 사용되는데, 자이로펌프는 임펠러의 회전이 없고 원판의 기울기 운동으로 흡입과 토출을 반복하는 고압용적식 펌프이다. 이 펌프의 내구성을 향상시키기 위하여 우수한 내압성과 내마모성을 갖는 재질선정이 요구한다. 따라서 현재 가장 널리 사용되고있는 SKD11에 심냉처리를 통하여 미세조직의 개선을 수행하였고, 가스질화처리에 의한 표면경화로 내압성과 내마모성을 증가시키고자 하였다. SKD11의 미세조직 변화를 조사하기 위하여 광학현미경과 X-선 회절기를 사용하여 미세조직 관찰과 상변화를 조사하였으며, Rockwell 경도기틀 사용하여 각 변수에 따른 경도변화를 조사하였다. 연구 결과 기지조직은 모두 마르텐사이트로 나타났으며, 이 이외에 각각의 조건에 따라 크롬탄화물, PFZ, 잔류오스테나이트가 확인되었다. SKD11을 액화질소로 냉각한 후 500℃에서의 템퍼링으로 가장 큰 경도값을 얻을 수 있었다. 또한 가스질화처리에 의하여 표면경도를 크게 증가시킬 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.564-567
• /
• 2022

최근 딥러닝이 다양한 분야에서 활용됨에 따라 중앙 집중식 서버, 적대적 공격 그리고 데이터 부족 및 독점화와 같은 다양한 문제점이 발생하고 있다. 또한 연합학습을 수행할 경우, 클라이언트가 잘못된 기울기를 서버에 제공하거나 서버가 악의적인 행동을 할 경우 심각한 문제로 이어질 수 있다. 이와 같은 보안 취약점을 해결하기 위해 딥러닝에 블록체인을 결합하여 중앙 집중식 서버를 분산화하고 각 참여자 노드에게 인센티브를 줌으로써 신뢰할 수 있는 데이터를 수집하는 기법이 연구되고 있다. 본 논문에서는 위와 같이 딥러닝의 문제점을 해결하기 위해 블록체인이 어떻게 적용되었는지 살펴본다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.4
• /
• pp.371-392
• /
• 2011

The purpose of this study was to comparatively analyze the stress distribution according to the inclinations of abutments and angulations of the implant fixtures under occlusal loading force. Three study models with straight and $15^{\circ}$ and $25^{\circ}$-angled abutments were prepared following the insertion of Implants parallel to the long axis of the tooth. Additional two experimental models were fabricated with $15^{\circ}$ and $25^{\circ}$ fixture inclinations. Using ANSYS 11, a finite element analysis program, the magnitudes of stress distribution were analyzed. The magnitude of stress under loading was lowest when the load was applied vertically onto the axis of implant. And the magnitude of stress under compound(vertical+oblique) loading was increased as the inclination of implant abutment and fixture was increase. But, the distribution of stress was different as the loading conditions, because of the horizontal offset. As the offset between the axis of loading and the central axis of the implant increased, the stress was increased.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.5
• /
• pp.21-27
• /
• 2008

Despite recent studies on development of pulse diagnosis systems and needs for commercializing them, the reproducibility is one of the most controversial issues as ever. Because the pulse pressure value, which is one of the important parameters to evaluate reproducibility, is very vulnerable to moving artifacts, the reproducibility can not be obtained easily. In this paper, we suggested a moving artefacts detection system for a pulse diagnosis system so that a pulse diagnosis system can be robust to theses kinds of artefacts by excluding the contaminated parts from the pulse wave signal to be analyzed. This moving artifacts detection system was designed to consist of a three-axis accelerometer, an electromyography amplifier and a two-axis tilt sensor. To assess the suitability of the system, we examined the characteristics of each sensor's output signals with regard to the three specific motions such as extension, flexion and rotation. And, we also examined the each sensor's response to the high-frequency and low-frequency moving artifacts while the pulse wave signal was acquired from a pressure sensor for the pulse diagnosis. From these results, we could find that the response to subject's motions would be reflected in electromyography signal first, in accelerometer signals and in tilt sensor sequently. And, the facts that a stable pulse wave can be acquired in two seconds after high frequency or low frequency motions ended, were also found. Consequently, based on these findings, we set up some rules on the moving artifacts detection and designed an algorithm which is fit for our moving artifacts detection system.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.556-562
• /
• 2009

Ectopic eruption of the maxillary first permanent molar means that the molar erupts out of the normal position and is arrested in its eruption by the second primary molar. This local eruption disturbance results in a premature atypical resorption on the distal part of the second primary molar. In most irreversible cases, the second primary molar is lost prematurely, either by spontaneous exfoliation or by extraction, In cases of doubt as to whether the eruption is of the irreversible type or not, careful radiographic observation period for a few months would be valuable in evaluating the possibilities of the tooth's freeing itself. The purpose of this study was to determine the characteristics and occurrence of the ectopic eruption of the maxillary first permanent molar. A descriptive, observational, retrospective study was done using the radiographs of 25 conseutive patients, who were in the first phase of mixed dentition. A method was designed to evaluate the amount of pathologic resorption of the second maxillary primary molar and the mesial angulation of the first permanent molar. The study showed that the most important etiologic factor was the eruption path or mesial angulation of the first permanent molars relative the chosen reference lines.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.143-152
• /
• 2012

It is well-known that image matching is necessary for automatic generation of 3D data such as digital surface data from aerial images. Recently developed aerial digital cameras allow to capture multi-strip images with higher overlaps and less occluded areas than conventional analogue cameras and that much of researches on multi-image matching have been performed, particularly effective methods of measuring a similarity among multi-images using point features as well as linear features. This research aims to investigate similarity measuring methods such as SSD and SNCC incorporated into a area based multi-image matching method based on vertical line locus. In doing this, different similarity measuring entities such as grey value, grey value gradient, and average of grey value and its gradient are implemented and analyzed. Further, both dynamic and pre-fixed adaptive-window size are tested and analyzed in their behaviors in measuring similarity among multi-images. The aerial images used in the experiments were taken by a DMC aerial frame camera in three strips. The over-lap and side-lap are about 80% and 60%, respectively. In the experiment, it was found that the SNCC as similarity measuring method, the average of grey value and its gradient as similarity measuring entity, and dynamic adaptive-window size can be best fit to measuring area-based similarity in area based multi-image matching method based on vertical line locus.