• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.57-62
• /
• 2016

This study was conducted to find out the influence of red LED (Light Emitting Diode) lighting on the photosynthesis, vegetative growth and fruit quality of 'Fuji'/M.26 adult apple tree during night after sunset. The photosynthetic rate, stomatal conductance and transpiration rate at daytime of red LED treatments was not different to those of the control. However, the stomatal conductance and transpiration rate at the nighttime of red LED treatments were lower than those of the control, and the red LED lighting during night after sunset was not induce to photosynthesize at nighttime. In the leaf characteristics, the red LED lighting seemed to increase leaf area and C/N ratio, but decrease SPAD value. The bourse shoot length of the red LED treatments was shorter than that of the control. In the fruit quality, the red LED lighting seemed to increase ethylene production, respiration rate, soluble solid content and fruit red color, and especially the fruit red color tend to increase as the red LED lighting time was longer. In conclusion, the red LED lighting during night after sunset of 'Fuji'/M.26 apple tree promoted the fruit maturation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.429-435
• /
• 2016

Cold stretching(CS) pressure vessels from ASS304 (austenitic stainless steel 304) are used for the transportation and storage of liquefied natural gas(LNG). CS pressure vessels are manufactured by pressurizing the finished vessels to a specific pressure to produce the required stress ${\sigma}_k$. After CS, there is some degree of plastic deformation. Therefore, CS vessels have a higher strength and lighter weight compared to conventional vessels. In this study, we investigate the tensile and fatigue behavior of ASS304 sampled by CS pressure vessels in accordance with the ASME code at cryogenic temperature. From the fatigue test results, we show S-N curves using a statistical method recommended by JSEM-S002. We carried out the fractography of fractured specimens using scanning electron microscopy (SEM).

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.189-194
• /
• 2010

A multi line electric tube consisted of XL pipes contained with 2~4 hot wires and water in it. The specification of one meter length multi-line electric tube was investigated and the proper number in the multi-line electric tube was determined. A multi line electric tube with three hot wires were found to be the most efficient for the media heating control system. Temperature rise of medium in the rice hulls media was faster than that in the perlite media, showed better insulation effect of rice hulls media. Temperature rise of medium with mulching on the top of the bed was faster than without mulching, resulted in the beneficial effect of temperature rise with mulching. The regression model for the rice hulls media with mulching air temperature of $5^{\circ}C$ were a = -0.1458 and b = -0.1088. Using the model, the temperature rise of medium during low temperature season can be predicted for the various media according to the different depths.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.809-815
• /
• 2017

STS 304 steel is used as pressure vessel material, and although it exhibits excellent mechanical characteristics at a low temperature, it is heavier than other materials. To address this issue, a method using cold-stretching techniques for STS 304 can be applied. In this study, a cold-stretching part and welded joint specimen were directly obtained from a cold-stretching pressure vessel manufactured according to ASME code. Fatigue crack propagation tests were carried out at room temperature and $-170^{\circ}C$ using the compliance method for stress ratios of 0.1 and 0.5. The results indicate that crack growth rate of the welded joint is higher than that of the cold-stretching part within the same stress intensity factor range. The outcome of this work is expected to serve as a basis for the development of a cold-stretched STS 304 pressure vessel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.263-267
• /
• 2015

current mine detector can't division the section if it is conducted and it needs too much labor force and time. in addition to, if the user don't move the head of sensor in regular speed or move it too fast, it is hard to detect a mine exactly. according to this, to improve the problem using one direction ultrasonic wave sensing signal, that is made up of human body antenna part, main micro processor unit part, smart glasses part, body equipped LCD monitor part, wireless data transmit part, belt type power supply part, black box type camera, Security Communication headset. the user can equip this at head, body, arm, waist and leg in removable type. so it is able to detect the powder in a 360-degree on(under) the ground whether it is metal or nonmetal and it can express the 2D or 3D film about distance, form and material of the mine. so the battle combats can avoid the mine and move fast. also, through the portable battery and twin self power supply system of the power supply part, combat troops can fight without extra recharge and we can monitoring the battle situation of distant place at the command center server on real-time. and then, it makes able to sharing the information of battle among battle combats one on one. as a result, the purpose of this study is researching a smart wearable mine detector which can establish a smart battle system as if the commander is in the site of the battle.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.165-172
• /
• 2002

Generally, the steel rigid frame has been analyzed using finite element analysis tools. While many efforts have been poured into the understanding and accurate prediction for the nonlinear behavior of the columns and beam-columns connections, the base of the columns are modeled as simply hinged or fixed. However, the base of the steel columns practically is neither fixed not hinged. It behaves as semi-rigid. In this paper, the supports of the columns we modeled as semi-rigid and the importance of such approach in moment-resisting columns is evaluated. Two typical buildings designed by the US specification are modeled and analyzed by the finite element based on stiffness method and flexibility method. The column bases of three-story buildings are modeled as rotational springs with a varying degree of stiffness and strength that simulates the semi-rigidity of the base. Depending on the degree of stiffness and strength, the semi-rigidity varies from the hinged to the fixed. Buildings with semi-rigid column bases behaves similarly to the building with fixed bases. It has been numerically observed through the pushover and nonlinear time history analyses that the decrease of the stiffness of the column base induces the rotational demand on the int air beams. an increase of rotation demands on the first store connections and lead to a soft-story mechanists Due often to the construction and environmental effects, undesired reduction of column base stiffness may cause an increase of rotation demands on the first store connections and lead to a soft-story mechanism.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.447-454
• /
• 2016

In the meantime, looking at the present status of how to estimationte the quantity of rebar based on 3D BIM getting the limelight in these days, commercial BIM tools provide rebar modeling functions however it takes a vast amount of modeling time for modeling of rebar in use of that function hence there is no BIM software at present for practical use. Therefore, in this study, we organized and presented a practical rebar quantity estimationtion process in BIM-based design work-site and intended to develop a program named Rebar Automatic Arrangement Program - hereinafter called RAAP - which enables automatic rebar arrangement based on much more precise cross-sectional information of bars in column, beam, slab and wall than the one from existing 2D method under the conditions without any cross-sectional information in the initial design phase. In addition, we intended to establish rebar quantity estimationtion process in the initial design phase through interworking of modeling & quantity estimationtion functions in consideration of joint, anchoring length of BuilderHUB as a BIM software with RAAP. The results from this study are practical in developing a technology that is able to estimationte quantity with more improved reliability than the one from existing 2D-based methods with less effort when the quantity of framework is estimationted in the uncompleted state of cross-sectional design for structural members in the initial design phase of a construction project. And it is expected that it could be utilized as a basic study from which a reasonable quantity estimationtion program can be established in the initial design phase.

• Applied Microscopy
• /
• v.31 no.3
• /
• pp.287-305
• /
• 2001

To investigate a role of cartilage canals in osteogenesis and growth of the vertebrae, in human fetuses ranging from 50 mm to 260 mm crown rump length were studied by electron microscopy. The initial appearance of cartilage canals of the vertebral body was observed at 60 mm fetus. In 80 mm fetus, primary ossification center in the vertebral body was first noted. The vertebral body showed calcified chondrocytes surrounded by a tone of hypertrophied chondrocytes and deep canals which terminated in calcified matrix. Most hypertrophied chondrocytes in the centrum showed in various stage of degeneration in disorderly arrangement. At the blind end of deep canal, osteogenic cells, osteoblasts and chondroclasts were observed. Resorption of unmineralized cartilage septa was undertaken by perivascular cells within cartilage canals. The ruffled border of the chondroclast was restricted to resorption site of calcified cartilagenous matrix. The periosteal bone formation was followed by the appearance of primary center of the centrum at 120 mm fetus. The osteoblasts of the perichondrium started to lay down a thin membranous bony lamella on the outer surface of the osseous trabeculae of the centrum. The processes of bone formation in the vertebral bodies were found to possess morphological similarities to that occurring at secondary center of the epiphysis of a long bone. These results indicate that the connective tissue cells within the cartilage canals proliferate and differentiate into osteoblasts at the site of endochondral ossification of the vertebrae.

• Journal of Veterinary Clinics
• /
• v.25 no.2
• /
• pp.131-135
• /
• 2008

A 5-year-old Chihuahua dog was evaluated for a tetraparesis. The dog was presented with a non-ambulatory tetraparesis and neck pain. Radiography demonstrated an atlantoaxial (AA) subluxation and increased distance between the dorsal arch of the C1 and the dorsal spinous process of the C2. The AA joint was fixed with ventral transarticular fixation using two screws under fluoroscopic guidance. Neck brace was applied during 3 weeks post-operation. After 4 weeks, the dog was fully ambulatory with improved neurological function. Postoperative radiographs confirmed reduction of the luxation and no migration of screws. The dog showed complete resolution of clinical signs without signs of recurrence till 4 months after operation. Proper angulations of screws provided under fluoroscopic guidance, enabled adequate stabilization of the AA joints using ventral transarticular screw fixation which improved neurologic outcome of the patient.

• Weed & Turfgrass Science
• /
• v.2 no.4
• /
• pp.376-380
• /
• 2013

This research was carried out to establish a mass-production method and to develop ornamental Gramineae species as cash crops for famers as three species of ornamental grasses were used for seed treatment and plug production. Germination rates of Arundinella hirta were improved to 52.6% by soaking in 4% NaOCl for 60 min and 49.4% with 4% NaOH for 30 min. Germination rates of Panicum virgatum were 20.3% and 22.4% when treated with 4% NaOCl for 10 min and 2% NaOH for 60min treatment, respectively. Pennisetum alopecuroides showed germination rates higher than 98% with both 4% of NaOCl and NaOH for 60 min. When the same size of trays were used, Pennisetum showed faster plug formation in 21 and 30 days with 162 and 40 cell trays, respectively. Arundinella showed a similar trend with Pannicum in completing plug formation, those took 32, 41, and 44 days with the 162, 72, and 40 cell tray, respectively. Plug production was faster with smaller cells; however, total growing period was longer with larger cells in general.