• Title/Summary/Keyword: 기능상문제점

Search Result 567, Processing Time 0.027 seconds

Riverbed Change Monitoring According to Gongju Weir Contruction (공주보 건설에 따른 하상변동 모니터링)

  • Yu, In-Sang;Oh, Kuk-Ryul;Jin, Kee-Hyun;Jeong, Sang-Man
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.685-685
    • /
    • 2012
  • 농업용수 및 친수공간 확보, 경관 향상 등의 다양한 목적을 위한 보의 건설은 하천의 흐름을 차단하여 보를 기준으로 상 하류의 흐름특성을 변하게 하고 토사퇴적에 많은 영향을 미치게 된다. 토사의 퇴적으로 인해 하상이 상승되면 홍수시 홍수위 상승에 의한 치수적인 문제점이 발생하고 토사의 침식이나 공급차단으로 인해 하상이 저하되면 하상세굴로 인해 교각이나 수위관측소와 같은 하천시설물의 기능이 저하되며 하천부지의 변화 등 하천유역 관리에 많은 영향을 준다. 따라서 보 상 하류의 하상변동을 예측하고 분석하는 것은 하천 관리에 매우 중요하다. 본 연구에서는 공주보 건설 기간 중 공주보를 기준으로 상 하류의 하상변동 및 퇴적 토사의 입도 변화양상을 조사하기 위해 모니터링 지점을 선정하였고, 하상단면 수심측정기를 이용하여 하상의 형상 모니터링을 통해 하상변동 양상을 분석하였으며 토사시료를 채취하여 하상재료 입도분포를 분석하였다. 그 결과 공주보 상류 모니터링 지점의 하상 평균높이가 0.52m 낮아진 것으로 측정되었고, 하류 모니터링 지점 역시 하상고의 평균 높이가 0.36m 저하된 것으로 측정되었으며, 하상형상의 모습은 큰 차이를 보이지 않았다. 보의 건설로 상류측의 토사퇴적이 예상 되었으나 모니터링 시에는 수문이 개방되어 하천의 흐름이 비교적 원활하여 보 상류측에 토사의 퇴적현상이 발생하지 않은 것으로 판단된다. 또한, 하상재료를 채취하여 균등계수 및 곡률계수를 통해 입도분포를 분석한 결과 체가름시험 규정에 의해 '나쁜입도'로 분류되었다.

  • PDF

A Study on the Diagnosis and Improvement of the Road Work Zone (도로점용공사장 교통관리방안의 문제점 및 개선방안 (서울시를 중심으로))

  • 김종민;이상용
    • Journal of Korean Society of Transportation
    • /
    • v.21 no.5
    • /
    • pp.119-133
    • /
    • 2003
  • 도로는 교통기능 외에 여러 시설물을 수용할 수 있는 사회 인프라구축의 공간으로 활용될 수 있기 때문에 서울시뿐만 아니라 각 지방자치단체에서는 이러한 공간을 활용하기 위한 도로점용공사는 매년 전국적으로 수만 건에 달하고 있다. 따라서. 매년 발생하는 도로점용공사의 차로과다 점용, 교통시설물 설치 부적절, 보행자 안전무시, 공사안내표지 부적절, 공사구간에서의 불법 주.정차 등의 문제점이 계속하여 발생.지적되고 있으나 이에 따른 관련 규정이 미흡하여 도로점용공사 시행자의 불법을 초래하고 있는 실정이다. 또한 서울시의 경우 시스템적 접근방법인 관련조례에 의해서 수행되기보다는, 교통자문회의로 운영되고 있으며, 관련 인원 및 법적 제재조치가 미약하여 도로점용공사의 효과적인 관리가 어려운 실정이다. 따라서 서울시 및 각 지방자치단체에서는 도로점용공사로 인한 보행자와 운전자의 통행권 확보와 안전상의 문제 등을 하루빨리 인식하여 도로점용공사에 따른 도로공사장 교통관리 규정을 법규화 하여 체계적으로 관리할 필요가 있다. 이에 따라, 본 논문에서는 도로점용공사에 따른 관련법 및 적용대상, 관련보고서 검토, 서울시를 사례로 한 공사중 교통처리방안 운영실태 및 문제점의 진단을 통하여 향후 도로공사장 교통관리 규정의 운영적 및 제도적 측면의 개선방안과 향후 추진방향을 제시하고자 한다.

Improvement of Review System on Sea Area Utilization-Impact by Marine Environmental Management Law (해양환경관리법상 해역이용영향 검토기관의 발전방향)

  • Lee, Dae-In;Eom, Ki-Hyuk;Kim, Gui-Young;Jang, Ju-Hyoung
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.11 no.1
    • /
    • pp.55-62
    • /
    • 2008
  • This study investigated the status and problems of marine-related environmental impact assessment and a utilization-consultation system in Korea and suggested improvement of the review organization. Also, it conducted SWOT analysis based on evaluation of functions, roles and performance of the marine environmental impact assessment center and proposed development strategies of the center through introduction of expert opinions and advanced systems. The performance statement-review by the center in 2007 included 358 cases in total; 165 (46.1%) for consultation on utilization of sea area, 104 for environmental impact assessment (29.0%), and 89 (24.9%) for prior environmental review. The consultation on utilization of sea area can be divided into that for public water surface-use (41%) and reclamation (32%), and sea aggregate extraction process (21%). Although bad impacts on marine environment are reducing under the current system, there are some limits and problems to supplement it in terms of content, system and operation. Review system on sea area utilization-impact(marine environmental impact assessment center) by marine environmental management law needs to obtain expertise, fairness and efficiency and, to do so, have operational supports and institutional improvement to maximize its own functions and roles. At the same time, it is necessary for the center to establish identity and the status as a professional review organization by setting active development strategies inside the center. Finally, it should strengthen an consultation system of marine environmental impact assessment led by the related ministry to achieve effective coastal management.

  • PDF

A Study on Design Guideline of Cyber Chatting System based on Usability Evaluation (사이버 채팅 시스템의 사용성 평가를 통한 사용자 인터페이스 설계 지침에 관한 연구)

  • 전대인;박정순
    • Archives of design research
    • /
    • v.14 no.1
    • /
    • pp.35-46
    • /
    • 2001
  • Recently varieties of user groups are formed as the number of people using cyber chatting gets increased and there are many changes in the range and field of its use. But because most of the cyber chatting systems are being operated to enlarge the additional sonics use, the using environments are stereotyped. And as its function is being various as well, it can not provide with a user-centered environment. So this thesis compares and analyzes the problems derived from the usability evaluation for solving the problems in using cyber chatting systems, and presents the guidelines of emotion-intended user interface design for improving the usability as the result of the analysis. First, this study investigates cyber chatting systems as a means of web communication tools through the existing literatures. Secondly, this study finds out the problems in using them through satisfaction evaluation, heuristic evaluation, performance evaluation, and observation evaluation and presents a way of solving the provisional problems in using them as the analysis of the result of usability evaluation. And this was proceeded for the purpose of applying and activating the better usability evaluation of cyber chatting systems later. Through the usability evaluation, it is found out that the structuralization of chatting function, the screen visibility by the size and arrangement of the compositional elements of a screen, and the improvement and development of the proper metaphor use of images and functions by the communication environment are necessary.

  • PDF

A Modeling of Web-service for Construction CALS/EC Standard Guideline by using Component Based Development (컴포넌트 기반 개발방법론에 의한 건설 CALS/EC 표준지침 웹서비스의 모델링)

  • 이상호;정용환;김소운
    • Proceedings of the CALSEC Conference
    • /
    • 2003.09a
    • /
    • pp.78-83
    • /
    • 2003
  • 본 연구에서는 건설CALS/EC 기반의 정보화 추진을 위한 정보시스템을 개발할 때 적용되는 기존의 소프트웨어 개발방법론의 문제점을 분석하고, 표준화되지 않은 개발방법론의 적용으로 시스템 개발에 비효율적인 비용을 투자하는 문제점과 특성상 입찰, 구매, 계약 등 분야별로 상이한 기능의 업무에 따라 구축되는 건설산업 정보화에 있어서 상호간에 데이터 및 프로세스를 원활히 통합하지 못하므로 인하여 발생되는 개발의 중복성, 정보 활용의 비효율성 등의 문제점을 개선하고자 하였다. 이를 위하여 최근 새로이 부각되고 있는 방법론인 컴포넌트 기반 개발방법론(CBD: Component-Based Development)을 사용하여 건선CALS/EC 표준지침 웹서비스를 위한 시스템의 업무프로세스를 모델링하여 사용자가 쉽게 재사용가능하고 타업무분야에 확대 가능한 방향을 제시하였다. 본 연구를 위하여 기존의 소프트웨어 개발 방법론의 적용상 문제점 분석을 통하여 컴포넌트 기반 개발방법론의 필요성을 증명하고 비즈니스 컴포넌트 프레임워크를 사용하여 건설 CALS/EC 표준지침 웹서비스의 업무프로세스에 적용할 기술적인 방법론을 고찰하고 업무에 효과적으로 적용할 수 있는 업무프로세스 컴포넌트를 제시하였다. 본 연구에서 도출된 컴포넌트 모델은 향후 타업무분야의 시스템을 개발할 때 사용자요구분석 단계부터 별도의 재 작업이 없이 사용될 수 있으며 시스템을 구현할 때 개발 모듈의 중복방지와 용이한 비즈니스로직의 변경 등이 가능하며, 추가의 업무 프로세스나 연관된 다른 분야의 업무프로세스의 반영 및 추가 시 컴포넌트의 활동모델을 쉽게 수정하여 정의함으로써 쉽게 시스템의 기능을 확장할 수 있다.LE 산정에 관한 지속적인 실험적 연구가 이루어져야 하겠다. 증가할 것이다. 또한 부분육을 이용한 완전제품, 적색육제품, 유기농이나 별미식 제품과 같은 형태의 다양한 포장육 제품이 도입 될 것으로 생각되어진다.e in vitro SPF test method will be able to be used as an alternative method for in vivo SPF in case of lotion and cream. replica. A statistically significant improvement of Star Fruit Leaf Extract BG30-treated site was seen in decreased wrinkles. Star Fruit Leaf Extract BG30 results in clinically visible improvement in wrinkling when used topically for 5 weeks. 또한 관계마케팅, CRM 등의 이론적 배경이 되고 있는 신뢰와 결속의 중요성이 재확인하는 결과도 의의라고 할 수 있다. 그리고 신뢰는 양사 간의 상호관계에서 조성될 수 있는 특성을 가진 반면, 결속은 계약관계 초기단계에서 성문화하고 규정화 할 수 있는 변수의 성격이 강하다고 할 수가 있다. 본 연구는 복잡한 기업간 관계를 지나치게 협력적 측면에서만 규명했기 때문에 많은 측면을 간과할 가능성이 있다. 또한 방법론적으로 일방향의 시각만을 고려했고, 횡단적 조사를 통하고 국내의 한 서비스제공업체와 관련이 있는 컨텐츠 공급파트너만의 시각을 검증했기 때문에 해석에서 유의할 필요가 있다. 또한 타당성확보 노력을 기하였지만 측정도구

  • PDF

Development of the Inverter System with UPS Function for the Air-Conditioning Blower (UPS 기능을 갖는 A/C Blower용 인버터 시스템 개발)

  • Lim, Seung-Beom;Lee, Yun-Ha;Mok, Hyung-Soo;Ji, Jun-Keun
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.16 no.3
    • /
    • pp.302-308
    • /
    • 2011
  • The HVAC(Heating Ventilation and Air Conditioning) system is only controlled by turn on/turn off operations with AC 380V input. Therefore, the efficiency of the system is reduced and accoustic noise problem occurs. Also, the blower is shut down at the AC power failure. In this paper, the inverter system with UPS function for the A/C(Air Conditioning) blower is proposed. Proposed inverter system which is powered from the AC and DC voltage can control speed, operation mode, and soft-start time using CAN communication. In case of the CAN communication failure, RS-232 communication could be used to control the hardware directly by the engineer that can solve existing problems. To verify the validity of proposed inverter system, simulations and experiments are carried out.

An Effective Function Analysis Application for Construction VE Projects (건설 VE 프로젝트에서 효과적인 기능분석 적용방안)

  • Choi Seok-In
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • autumn
    • /
    • pp.78-84
    • /
    • 2002
  • In VE(Value Engineering) process, function analysis technique is utilized as a stepping stone to induce creative idea. However, function analysis is regarded as the most difficult job for VE team to undertake. For this reason, the function analysis is not properly applied or even omitted in construction VE studies. The current problems of function analysis in construction VE are following: 1) lack of basic understanding of the function analysis as problem solving technique, 2) the sequential step-by-step analysis process, 3) lack of interrelationship between function analysis and other phase in th VE process, 4) lack of time, experience, training, and quantitative data etc. The existing function analysis is faultiness theoretically. However, it is not enough for efficient use in practice, Thus The study aims to suggest an function analysis application method and to develop a computerized FAST(function Analysis System Technique) diagramming model, called Easy-FAST, for the efficient and effective function analysis on construction VE projects.

  • PDF

산악지(山岳地)에서 국토보전(國土保全)과 토지이용효과(土地利用効果) 제고(提高)를 위한 혼림초지(混林草地)의 조성방안(造成方案)

  • Ma, Sang-Gyu
    • Journal of Korean Society of Forest Science
    • /
    • v.58 no.1
    • /
    • pp.125-131
    • /
    • 1982
  • 산지개간(山地開墾)에 의한 인공초지(人工草地) 조성(造成)은 급경사지(急傾斜地)이고 복잡(複雜)한 지형(地形)의 한국(韓國) 산악지(山岳地) 조건(條件)과 계절간(季節間)에 기후차(氣候差)가 심한 한국(韓國)의 기후상태(氣候狀態)로 보아 많은 문제점(問題點)이 있을 것이고, 이와 같은 지형(地形)과 기후조건(氣候條件)들 때문에 토지이용시(土地利用時) 신중(愼重)한 배려(配慮)가 요구(要求)된다. 산지황폐(山地荒廢)와 홍수피해(洪水被害) 등(等)이 국토관리상(國土管理上) 큰 문제점(問題點)으로 되어 왔고 금후(今後)에도 이 문제(問題) 해결(解決)은 토지경영(土地經營)에 있어 커다란 과제(課題)로 남아 있다. 또한 식량증산(食糧增産)을 위한 토지(土地)의 경제적(經濟的) 이용(利用)도 큰 과제(課題)의 하나임에는 틀림 없다. 이와 같이 토지이용상(土地利用上)에 서로 상충(相衝)되는 이들 과제(課題)를 해결하기 위하여 인공토지(人工土地) 조성(造成) 대책(對策)을 검토(檢討)한 바 임축인(林畜人)들이 상호(相互) 협동(協同)하여 이 과제(課題)의 기술(技術)을 개발(開發)시켜야 될 것으로 판단(判斷)이 된다. 국토보존(國土保存) 문제(問題)를 해결하고 동시에 인공초지(人工草地)의 문제점인 하고현상 식피밀도(植被密度)와 연년생장(年年生長)의 감소현상을 해결하기 위하여 상호보완적(相互補完的)인 생태적(生態的)인 방법(方法)이 도입(導入)되어야 할 것 같다. 이를 위해 삼림(森林)이 갖고 있는 토양침식방지(土壤浸蝕防止), 토양수분보지기능(土壤水分保持機能), 온도변화기능(温度變化機能), 공중온도(空中温度) 보지기능(保持機能), 방풍기능(防風機能)과 풍치기능(風致機能)을 잘 활용(活用)하여 국토(國土)를 보존(保存)시키고 동시(同時)에 초지생산성(草地生産性)도 높이는 방안(方案)이 인공초지조성(人工草地造成)에 있어 기대될 수 있는 방법(方法)으로 사료(思料)된다. 이의 대책(對策)의 일환으로 유실수(有實樹)와 초(草)와의 혼농림조성(混農林造成), 임간초지(林間草地)와 방목(放牧), 활엽수림하(闊葉樹林下)의 혼림초지(混林草地) 경사지(傾斜地)에 있어 대상식(帶狀式)과 세포식(細胞式)의 방풍(方風) 및 황폐방비림(荒廢防備林)에 의한 초지조성(草地造成) 또한 산능선부와 계곡부의 삼림(森林)을 보존(保存)시키는 초지조성법(草地造成法)을 제시(提示)하였다. 수광량(受光量)이 문제(問題)가 될 경우에는 간벌(間伐)과 가지치기 들(等)으로 조절할 수 있게 되고 예취작업(刈取作業)의 기계화상(機械化上)의 문제(問題)는 상하(上下) 수대(樹大)의 배열(配列) 또는 배식방법(配植方法)에 의해 조절할 수 있으므로 혼림초지조성(混林草地造成)이 초지생산성(草地生産性)에 하등의 영향을 주지 않을 것으로 사료(思料)되며 오히려 초생산량(草生産量)을 증대(增大)시키는 방법(方法)이 될 것이다.

  • PDF

A Plan for Better Productivity of Sub-Contractors through Improvements of Daily Reporting Process (작업일보 작성프로세스 개선을 통한 협력업체 생산성 향상방안에 관한 연구)

  • Kim Bong-Nyoun;Kim Chang-Duk
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • autumn
    • /
    • pp.375-378
    • /
    • 2002
  • Most construction works in a building site are progressed by many work categories and sub-contractors. Therefore there are many difficult things of management of construction-information because variable occurrences are happened to manpower and material resources. For this reason, various management systems are suggested, but the application of these systems are difficult because only construction company manages these systems and sub-contractor's participation, understanding and financial ability are insufficient. In addition to that, there are other problems such as lost information when it is carried, perversion and distrust of information by hand and lots of time and labor are necessary for collection, analysis, and management of information which are offered for daily report. so the purpose of this study is for improvement of reporting process with making an analysis of productivity effects and an analysis of function and problem of daily report. I intend to suggest the direction of improved daily report system for better productivity of construction work through input information and management of cooperation enterprises.

  • PDF

Music Recognition by Partial Template Matching (부분적 템플릿 매칭을 활용한 악보인식)

  • Yoo, Jae-Myeong;Kim, Gi-Hong;Lee, Guee-Sang
    • The Journal of the Korea Contents Association
    • /
    • v.8 no.11
    • /
    • pp.85-93
    • /
    • 2008
  • For music score recognition, several approaches have been proposed including shape matching, statistical methods, neural network based methods and structural methods. In this paper, we deal with recognition for low resolution images which are captured by the digital camera of a mobile phone. Considerable distortions are included in these low resolution images, so when existing technology is used, many problems appear. First, captured images are not stable in the sense that they contain lots of distortions or non-uniform illumination changes. Therefore, notes or symbols in the music score are damaged and recognition process gets difficult. This paper presents recognition technology to overcome these problems. First, musical note to head, stick, tail part are separated. Then template matching on head part of musical note, and remainder part is applied. Experimental results show nearly 100% recognition rate for music scores with single musical notes.