• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.184-192
• /
• 2001

In this paper, we analyze the result of the conduced emission and susceptibility tests performed on the KOMPSAT-I ETB Platform. The ETB platform consists of the EM (Engineering Model) boxes developed to perform the electrical functional test. During the conducted emission test, we measured the instant waveform in time domain when each switch was turn on, and spectrum of the noise in the frequency range of 10 Hz up to100 MHz fur the steady state of the ETB. During the conducted susceptibility test, no malfunction and no serious damage of the electronic box were observed when a simulated noise waveform was applied to the DC power bus. The simulated waveform was obtained by adding the 6 dB-system margin to the worst case waveform measured from the conducted emission. This test was performed as co-development of the KOMPSAT-I with TRW in USA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.97-101
• /
• 2024

In this paper, we present the implementation of proton beam irradiation test logic and test results for Xilinx's RFSoC FPGA. In addition to the FPGA function, RFSoC is a chip that integrates CPU, ADC, and DAC and is attracting attention in the defense and space industries aimed at reducing the size of the chip. In order to use these chips in a space environment, an analysis of radiation effects was required and radiation mitigation measures were required. Through the proton irradiation test, the logic to measure the radiation effect of RFSoC was designed. Logic for comparing values stored in memory with normal values was implemented, and protons were irradiated to RFSoC to measure SEU generated in the block memory area. To alleviate the occurrence of SEU in other areas, TMR and SEM were applied and designed. Through the test results, we intend to verify this test configuration and establish an environment in which logic design for satellites can be verified in the future.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.471-478
• /
• 2012

The objective of the study is to find a way to utilize MSWI slag as filter material and to verify it. To do so, stability as filter material was tested, and used Ju-Munjin filter sand as control group to run actual filtering experiment to analyze filtering efficiency. According to result, MSWI slag is usable within designated waste acceptable standards. Also, it showed similar level of filtering capability to filter sand. Thus, MSWI slag could help to save and recycle resources if used as filtering material instead of filter sand As result of filtering test, SS and COD showed about same level of filtering capability similar to standard filter sand. MSWI slag has shown 26.96% higher with T-N, and 6.55% higher with T-P compared to standard filter sand. Also, remove efficiency comparison result with No. 40#(0.43mm) and mixed diameter showed equal or greater filtering capability.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.21-28
• /
• 2012

The continuous deployment of Urban Traffic Information System (UTIS) in Korea has increased the need for developing more practical applications utilizing the standard functions of UTIS facilities installed on urban arterials beyond its basic applications like gathering traffic data and providing traffic information. The UTIS-based bus signal priority may be one of UTIS-based applications meeting such demands. However, the studies on BSP have not been sufficient for actual field deployment in terms of theories and algorithms so that there have been few actual installations on real urban arterials. Thus, this study was aimed at developing a UTIS-based bus priority signal system and evaluating its effectiveness through a field study. To this end, this study presents the system development processes by dividing the UTIS-based bus priority signal system into hardware and software. In addition, the positive effectiveness of the UTIS-based bus priority signal system was verified through a field application test which was conducted at Gyeonggi Global Trade High School intersection.

• Food Science and Preservation
• /
• v.14 no.3
• /
• pp.239-246
• /
• 2007

The effects of gamma irradiation on the physiochemical and physical characteristics of apples were investigated during post-irradiation storage at $4^{\circ}C\;and\;25^{\circ}C$. The contents of total and reducing sugars were analyzed and the results indicated that apples receiving 1 kGy of gamma irradiation did not show significant differences in sugar contents compared to non-irradiated controls. Important physiological characteristics were evaluated by measurement of total phenolic content and total flavonoid content, reducing power, and radical scavenging ability, and the results indicated that gamma irradiation at a dose of 1 kGy did not affect physiological activities. Changes in physical parameters such as weight loss, strength, cohesiveness and hardness, during post-irradiation storage, were temperature-dependent, whether the apples were irradiated or not The color and sensory acceptance of the apples were not affected by irradiation during cold storage. However, minor deterioration in color quality and sensory acceptance of irradiated apples was noted under ambient temperature storage. We conclude that gamma irradiation(1 kGy) does not affect apple nutritional content stability, functional properties, or physical characteristics, especially upon cold storage after radiation treatment.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.3
• /
• pp.20-32
• /
• 1992

국제표준화기구(國際標準化機構)(ISO)의 비파괴시험(非破壞檢査) 기술자(技術者)의 기량인정(技量認定)및 인증에 관(關)한 국제친격안(國際規格案) DIS 9712를 번역, 소개(紹介)한다. 이 문서(文書)는 현재(現在)로는 안(案)에 불과하지만 부원간(不遠間) 회원국(會員國) 각국(各國)이 투표(投票)에 의(依)해서 결정(決定)되게될 것이다. 구주(歐州)의 대부분(大部分) 국가(國家)는 적극적(積極的)으로 찬성(贊戚)을 하고 있고 개발도상국(開發途上國)에서는 동조(同調)를 하고 있으며 일본(日本)도 찬성(贊成)을 표명하고 있다. 반대(反對)하는 나라는 놀랍게도 미국(美國)과 서독(西獨)이지만 대립점(對立點)이 몇가지로 좁혀지고 있고 타협책(妥協策)이 모색되고 있어서 국제규격(國際規格)으로써 확정(確定)되는 것은 시간문제(時間問題)인 것으로 보이며 정식(正式) 문서화(文書化) 하기까지는 아마도 시간(時間)이 좀 걸릴 듯하다. 많은 나라가 이 문서(文書)를 전제(前提)로 해서 비파괴시험(非破壞檢査) 기술자격(技術資格)에 대(對)한 인정(認定)의 국제통합(國際統合)을 추진(推進)하고 있다. 일본(日本)도 1989년(年)에 종래사용(從來使用)해오던 규정(規程)을 개정(改訂)하였으며 국제통합(國際統合)을 더욱 진전(進展)시키기 위(爲)하여 자국(自國)의 인정규정(認定規程)과 국제규격안(國際規格案)과의 항목별(項目別)로 비교검토(比較檢討)하고 있다. 우리나라의 기술자격인정제도(技術資格認定制度)는 국가기술자격법(國家技術資格法)에 의거(依據)하여 한국산업인력관리공단(韓國産業人力管理公團)에서 주관(主管)하여 실시(實施)하고 있는 반면(反面) 미국(美國), 구주(歐州) 등(等) 대다수(大多數)의 나라가 정부(政府)의 위임하(委任下)에 협회(協會) 등(等)의 단체(團體)에서 주관(主管)하여 실시(實施)하고 있는 것이 특징(特徵)이며 기술자격(技術資格)의 등급면(等級面)에서도 대부분의 국가(國家)가 Level 1, 2 및 Level 3의 3등급(等級)으로 구분(區分)하여 실시(實施)되고 있는데 현행(現行) 우리나라는 기능사(技能師), 기능장(機能長) (기능대졸업자(機能大卒業者) 대상), 기사(技師) 1, 2급 및 기술사(技術士)로 세분(細分)되어 실시(實施)되고 있다. 국제표준화(國際漂準化) 기구(機構)(ISO)의 비파괴검사(非破壞檢査) 기술자(技術者)의 기량인정(技量認定)및 인증에 대(對)한 국제규격(國漂規格)이 마무리 단계에 있고 많은 나라에서 국제통합(國際統合)을 추진(推進)하고 있는 추세여서 우리나라도 이에 대응해 나아가야 할 것으로 사료(思料)된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.343-349
• /
• 2013

Crashworthy fuel cells have a great influence on improving the survivability of crews. Since 1960's, the US army has developed a detailed military specification, MIL-DTL-27422, defining the performance requirements for rotorcraft fuel cells. In the qualification tests required by MIL-DTL-27422, the crash impact test should be conducted to verify the crashworthiness of fuel cell. Success of the crash impact test means the improvement of survivability of crews by preventing post-crash fire. But, there is a big risk of failure due to huge external load in the crash impact test. Because the crash impact test itself takes a long-term preparation efforts together with costly fuel cell specimens, the failure of crash impact test can result in serious delay of a entire rotorcraft development. Thus, the numerical simulations of the crash impact test has been required at the early design stage to minimize the possibility of trial-and-error with full-scale fuel cells. Present study performs the numerical simulation using SPH(smoothed particle hydro-dynamic) method supported by a crash simulation software, LS-DYNA. Test condition of MIL-DTL-27422 is reflected on analysis and material data is acquired by specimen test of fuel cell material. As a result, the resulting equivalent stresses of fuel cell itself are calculated and vulnerable areas are also evaluated.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.383-390
• /
• 2006

Product-line engineering is a dreaming goal in software engineering research. Unfortunately, the current underlying technologies do not seem to be still not much matured enough to make it viable in the industry. Based on our experiences in working on mobile telephony systems over 3 years, now we are in the course of developing an approach to product-line engineering for mobile telephony system software. In this paper, the experiences are shared together with our research motivation and idea. Consequently, we propose an approach to building and maintaining telephony application logics from the perspective of scenes. As a Domain-Specific Language(DSL), Menu Navigation Viewpoint(MNV) DSL is designed to deal with the problem domain of telephony applications. The functional requirements on how a set of telephony application logics are configured can be so various depending on manufacturer, product concept, service carrier, and so on. However, there is a commonality that all of the currently used telephony application logics can be generally described from the point of user's view, with a set of functional features that can be combinatorially synthesized from typical telephony services(i.e. voice/video telephony, CBS/SMS/MMS, address book, data connection, camera/multimedia, web browsing, etc.), and their possible connectivity. MNV DSL description acts as a backbone software architecture based on which the other types of telephony application logics are placed and aligned to work together globally.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.3 s.52
• /
• pp.245-251
• /
• 2005

Safety is one of the key issue in the regulation of cosmetics. Cosmetic Act deals with it in Korea. The guidance for the testing cosmetic ingredients and their safety evaluation are prepared by Korea Food and Drug Administration. Ultraviolet radiation could Induce skin damage, edema, erythema, photoaging, immune dysfunction and skin cancer. Ultraviolet radiation is classified as Group 2A(probably carcinogenic to humans) by International Agenry for Reaserch on Cancer(IARC). The in vitro methodologies for evaluating the toxic potential of ingredients reported in the literature have not yet been sufficiently validated for use in areas other than the study for mutagenicity/genotoxicity, for pre-screening for severe irritancy, for screening of phototoxicity and for evaluating the percutaneous absorption. The 3T3 neutral red uptake photoxicity test (3T3 NRU PT) was accepted as OECD toxicity guideline in 2002. The 3T3 NRU PT is an in vitro method based on a comparison of the cytotoxicitv of a chemical when tested in the presence and in the absence of exposure to a non-cytotoxic dose of UVA/visible light.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.4
• /
• pp.300-313
• /
• 1999

비파괴검사 기술의 레벨 향상과 안정화를 통한 시간적 재현성이 있는 비파괴검사 결과의 확보를 위해서는 비파괴검사 기술자의 자격 인정 및 인증(nondestructive testing qualification and certification of personnel)제도의 확립이 매우 중요하다. 비파괴검사 결과에 대한 유효성은 비파괴검사을 실시하는 사람의 능력이나 비파괴검사에 대한 책임을 지고 있는 사람의 능력에 크게 의존한다. 1974년부터 원자력 선진국들이 중심이 되어 수행된 PISC 프로그램(program for inspection of steel components) 및 EPRI 등에서는 순회시험 (piping inspection round-robin: PIRR trial) 결과 기존 비파괴검사 방법은 모의 시험편에 있는 상당히 큰 결함도 탐지하지 못하거나 정확한 결함크기를 측정하는데 실패한 경우가 있으며, 검사자의 기량 또는 신체조건에 상당한 차이가 있는 것으로 나타났다[1]. 국제표준화기구(ISO)의 비파괴검사 기술자의 기량인정 및 인증에 대한 국제규격안 DIS(draft international standard) 9712에서는 비파괴검사를 기획 실시 감독 감시 평가를 하기 위한 적절한 이론적 및 실무적 지식을 필요로 하는 기술자의 능력을 평가하고, 문서화하는 방법을 제공하는 절차를 제시하고 있다. 국제표준화기구에 의한 비파괴검사 기술자의 기량인정 및 인증에 대한 국제통합을 추진하는 동기는 제 3자에 의한 체계적인 인증시스템을 가지고 있지 않은 나라와 새로운 NDT 방법에 대해서 인증제도를 적용할 때 세계적인 공통성을 갖도록 유도하기 위함이다. 현재, 우리나라 비파괴검사 기술자의 기술자격 인증제도는 국가기술자격법에 의거하여 한국산업인력공단에서 주관하여 기술사, 기사, 산업기사, 기능사로 구분하여 실시하고 있다. 국제표준화기구의 비파괴검사 기술자의 자격과 인증에 대한 국제 통합화(안)[2]이 거의 마무리 단계에 있고 일본을 비롯한 많은 나라가 국제규격을 기초로 한 새로운 인증제도를 발족시켜 거의 시행 단계에 있다. 반면 국내에서는 한국비파괴검사학회(KSNT)에서 비파괴검사 기술자의 자격인정 및 인증제도의 개선방향이 제시된 바 있고 [3], 표준화위원회에서 나름대로 준비를 하고 있으나 아직 구체적인 실천단계에와 있지 못하다. 본 고에서는 최근 대폭수정 보완된 ISO/DIS 9712 국제규격(안)을 회원들에게 소개하고, 우리나라의 향후 대응방안에 관한 회원 여러분의 의견 수렴에 도움을 주고자 ISO/DIS 9712(1997)를 번역하여 제공한다.