• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.3
• /
• pp.1-10
• /
• 2011

Social network service is defined as an online service or communication service based on social relations among people applied the concept of social network. Social collaborative service included in social network service is characterized by the new value of modified content or recreated content made through collaborative creation process between members of the group. It has the remarkable merits such as sharing and collaboration. But, at the same time, it has the latent problems such as content reuse or copy that is not allowed for members to use. It has been emerged that UCC which is a typical example of recreated or modified content has the copyright issues in both creation and publishing step. To resolve this matter, we don't have many appropriate methods except CCL so far. So, in this paper, we define the problem and implement the UCC metadata manager to control metadata reflecting the feature of UCC. We draw the reference metadata element to identify original content utilized re-creation process. After that we define the R.Metadata Loader module based on the use case. Finally, the proposed UCC metadata manager provides the information of referenced content and lets us to identify the relationship between reference contents. So as to implement prototype, we use Kaltura which is CMS using open source and obtain functional extensibility of metadata manager by using open API.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.11-19
• /
• 2014

The Construction industry is a labor-intensive industry that its labor cost takes up about 30~40% out of the whole construction cost. However, due to a stereotype that on-site work is a 3D job there is a shortage of the labor forces. Modular construction method is to produce modular units in the plant so that workers could work stably. Also, after delivering the module from plant to the site, there will be only installment to be required that shortens construction duration. Even though the modular market is currently expanding based on military facilities in Korea, its best strengths are not demonstrated well which are shortened construction period and low cost. It also causes labor problem of production due to minimum utilization of the modular construction method. Multi-skilled labor means a technician that is able to perform more than two kinds of work with more than two techniques. Multi-skilled labor can proceed smoothly by figuring out the connectivity between the precedent and following operations. Therefore, this research is to apply the concept of Multi-skilled labors, suggest solutions and allocate manpowers efficiently. As a result, it helps to decrease idle manpowers during the operation and the total labor forces can be saved. Low cost is the original strength of the modular which can stand out so the modular market is expected to expand.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.142-142
• /
• 2010

일반적으로 기술융합이라는 용어는 IT, BT, NT 등 성격이 다른 큰 범주에서 기술간의 결합으로 인식되고 있다. 현재까지의 기술융합 연구들은 IT기술을 중심으로 한 융합과 관련 국가 정책에 관한 것이 대부분을 차지하고 있어 큰 기술 범주 위주에 국한되어 있다. 하지만 동일한 목적을 위해 수행하는 유사 기술영영에서의 기술융합 역시 기술혁신의 수단으로 간과할 수 없는 영역이다. 실제로 미국, 유럽 등의 선진국에서는 기술융합 전담기관을 신설하여 프로젝트 내의 기술간 융합에 관심을 갖고 있지만, 국내에서는 프로젝트 범위의 기술융합 가능성 및 실효성에 대한 연구가 부족한 실정이다. 이에 본 연구에서는 지식경제부에서 수행하는 가스하이드레이트 연구개발사업을 실증사례로 하여 프로젝트 범위의 기술 융합에 관하여 기술융합의 필요성, 적용가능성, 실효성에 초점을 맞추어 고찰하였다. 가스하이드레이트 개발 사업은 지식경제부 내 가스하이드레이트 개발사업단 주관으로 2005년에 시작되었으며 2014년까지 I 지역 탐사 및 시추, II 지역 탐사 및 시추, 시험생산의 3단계의 달성목표를 가지고 있다. 가스하이드레이트는 천연가스가 저온 고압 상태에서 물과 결합해 형성된 고체 에너지로 화석연료 고갈에 따라 이를 대체할 가장 유력한 청정에너지원으로 주목받고 있다. 현재 가스하이드레이트 개발사업단에서는 지구물리탐사분야 지질지화학분야 개발생산분야로 세부 기술모듈을 형성하여 목표달성을 위해 노력하고 있지만, 중과제간 교류가 부족한 상황으로 인해 목표달성을 위한 기술력의 확보 및 향후 상업생산에 대한 불확실성이 증가하고 있는 상황이다. 이와 같은 상황을 해결하기 위해서 기술개발 및 혁신의 수단인 기술융합의 필요성이 증가하고 있다. 기술혁신은 기초연구, 응용연구, 개발, 학습, 투자 등의 일련의 과정을 거쳐 경제적 성과와 사회적 영향을 만들어내는 개념으로 정의 할 수 있다. 기술혁신을 이루어내는 가장 중심적인 역할을 담당하는 기술융합은 2개 이상의 요소기술들이 결합하여 기술이 갖지 않는 새로운 기능을 발휘하는 기술혁신의 한 현상으로 정의할 수 있다. 기술융합은 21세기 초에 접어들어 급속하게 변화하는 양상을 보이며 예상보다 경제에 더 큰 영향을 미치고 있다. 가스하이드레이트 각 단계에서의 애로점을 극복하기 위한 기술혁신을 위해 지구물리탐사 지질지화학 개발생산분야간의 융합의 가능성 등을 타진해본 결과, 각 기술융합들을 기술융합 유형에 맞춰 분류할 수 있었으며 유형별 적용가능성과 기대효과 측면에서 비교분석을 수행하였다. 분석의 정밀도를 높이기 위하여 기술융합 유형에 대한 이론과 실제 가스하이드레이트 전문가들과의 설문을 통해 비교분석을 실시하였다. 가스하이드레이트 실증 사례에 대한 분석 결과, 기술융합 이론은 기존의 큰 기술범주뿐만 아니라 작은 범주에도 적용할 수 있으며, 필요성과 적용가능성, 실효성 면에서도 충분한 고찰을 통해 기술융합 이론의 적용 범위를 좁히면 더 많은 연구와 융합기술을 얻을 수 있다는 결론을 얻을 수 있다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.195-201
• /
• 2014

In this study, face recognition system was designed based on polynomial Radial Basis Function Neural Networks(pRBFNNs) pattern classifier using 2-directional 2-dimensional principal component analysis algorithm. Existing one dimensional PCA leads to the reduction of dimension of image expressed by the multiplication of rows and columns. However $(2D)^2PCA$(2-Directional 2-Dimensional Principal Components Analysis) is conducted to reduce dimension to each row and column of image. and then the proposed intelligent pattern classifier evaluates performance using reduced images. The proposed pRBFNNs consist of three functional modules such as the condition part, the conclusion part, and the inference part. In the condition part of fuzzy rules, input space is partitioned with the aid of fuzzy c-means clustering. In the conclusion part of rules. the connection weight of RBFNNs is represented as the linear type of polynomial. The essential design parameters (including the number of inputs and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. Using Yale and AT&T dataset widely used in face recognition, the recognition rate is obtained and evaluated. Additionally IC&CI Lab dataset is experimented with for performance evaluation.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.157-163
• /
• 2020

This paper is a product design convergence study to improve the aesthetic quality of CIGS solar cells for utilizing urban living structures, identifying problems of existing solar cell panels and drawing expert aesthetic elements for improving CIGS solar cells through survey and [Group discussion of experts] based on aesthetic elements of product design. Out of the aesthetic elements derived, the top three models of the product design process were 'environmental harmonization', 'pattern balance', and 'period universality' to derive the design and assembly design of the CIGS solar cell module for improving aesthetic quality, and applied to apartments, veranda, windows, and streetcar through product simulation. This study is suitable for applying aesthetic and CIGS solar cell function later to actual urban living structure, and future research direction needs to be studied on various patterns and structural design development of design.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.4
• /
• pp.152-159
• /
• 2001

Electric vehicle performance is very dependent on traction batteries. For developing the electric vehicles with high performance and good reliability, the traction batteries have to be managed to get maximum performance under various operating conditions. The enhancement of the battery performance can be accomplished by implementing battery management system (BMS) that plays important roles of optimizing the control mechanism of charge and discharge of the batteries as well as monitoring battery status. In this study the battery management system has been developed for maximizing the use of Ni/MH batteries in electric vehicle. This system provides several tasks: the control of charging and discharging, overcharge and over-discharge protection, the calculation and display of state of charge, safety and thermal management. The BMS was installed in and tested using the DEV5-5 electric vehicle developed by Daewoo Motor Co. and Institute for Advanced Engineering in Korea. The 18 modules of Panasonic Ni/MH battery, 12 V-95 Ah, were used in the DEV5-5. The high accuracy within the range of $3\%$ and the good reliability were shown in the test results. The BMS can also improve the performance and cycle life of Ni/MH battery pack as well as the reliability and safety of the electric vehicles (EV).

• Journal of Korea Spatial Information System Society
• /
• v.6 no.1 s.11
• /
• pp.31-50
• /
• 2004

With the growth of wireless communication networks and mobile devices taking in GPS, Location-Based Service(LBS) is becoming an integral part of mobile applications. LBS can deal with location-aware features such as persons holding mobile phones or vehicles equipped with GPS, and provide the users with the location information of the features. Thus it is necessary to develop moving object database systems to store, manage, and query moving objects which change their locations continuously as time passes. In this paper, we design and implement a query processing component which deals with moving objects as a key data type. For this component, we define a new SQL-like query language(called MOQL) and as a consequence, design and implement modules that analyze and execute queries. It supports various types of operators that process range queries, infer topological relations, compute trajectories, and find k-nearest neighbors. It can be used as a subsystem if other application systems which deal moving objects and also supports ADO.NET interface that can be used to interact end-users.

• Journal of The Korean Association of Information Education
• /
• v.9 no.3
• /
• pp.533-548
• /
• 2005

According to the increasing of the internet infrastructure and growth of contents technology, the users can access an education service at anytime and anywhere. In a field of English education, especially, internet technology has enabled learners to communicate with their teachers and multimedia contents technology has been able to provide learner not only lots of interests, but also good effect on English learning. In this paper, we propose a method diagnosing learner's level by using some question-items, which consist of item's type and item's function. Futhermore, the proposed system can support three devices which are PC, PDA, and Mobile Phone on wired and wireless internet communication environments. Also, the system provides multimedia contents including flash movies, image, and audio contents. We have applied the system into real classroom, and we verified that the question-items that system provides has no problem, and our method could improve each learner skill on English education. Therefore, we expect that learner who uses the proposed system will get level-based English learning service at anytime and anywhere.

• Journal of Engineering Education Research
• /
• v.9 no.4
• /
• pp.28-45
• /
• 2006

As society has changed to being more knowledge-based, it is indispensable that Internet usage is incorporated into education. Therefore, the e-learning system is being developed in order to provide a proper environment. However, many LCMS that were developed, currently are not based on SCORM, the world e-learning standard, nor KEM, the Korea Educational Metadata of Korea Education & Research Information Service(KERIS), and hence, it is difficult to share learning contents developed from such varied environments. National Science Museum, a non-educational institution, also provides the educational science exhibits in reality or in cyber space, which cannot be produced by elementary schools, and secondary schools. Consequently, new systems are necessary, whose modules should be divided into four, for example, 'teachers', 'learners', 'managers', and 'instructors', and be associated with each other so that they are able to integrate and manage such systems, and be used in school education as well. Therefore, in this study, more advanced LMS and LCMS, which are the web-portal sites used for a cyber science class at the National Science Museum, were designed and established. These sites were surely based on the KEM, and the SCORM.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.461-466
• /
• 2011

In genetic and molecular breeding studies of plants, researchers need to design various kinds of primers based on their research purposes. So far many kinds of web- or script-based non-commercial programs for primer design are available. Because most of them do not include user interface for multipurpose usage including gene structure prediction and direct target selection on sequences, it has been a laborious work to design primers targeting on the exon or intron regions of interesting genes. Here we report a primer designing graphic user interface program, Pickprimer, that includes gene structure prediction and primer design modules by combining source codes of the Spidey and Primer3 programs. This program provides simple graphic user interface to input sequences and design primers. Genomic sequence and mRNA or coding sequence of genes can be copy and pasted or input as fasta or text files. Based on alignment of the input sequences using the Spidey module, a putative gene structure is graphically visualized along with exon-intron sequences of color codes. Primer design can be easily performed by dragging mouse on the displayed sequences or input primer targeting position with desirable values of primers. The output of designed primers with detailed information is provided by the Primer3 module. PCR evaluation of 24 selected primer sets successfully amplified single amplicons from six Brassica rapa cultivars. The Pickprimer will be a convenient tool for genetic and molecular breeding studies of plants.