• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.116-122
• /
• 2023

As the number of hydrogen filling stations for hydrogen supply increases with the progress of low-carbon eco-friendly energy policies, the risk of accidents is also increasing. Actual pressure vessels may have defects such as notches, pores, and inclusions that may occur during the manufacturing process. Therefore, it is necessary to evaluate the integrity of pressure vessels in the case where cracks exist in pressure vessels under internal pressure. In this paper, 3D finite element analysis was used to evaluate the structural safety of hydrogen-filled pressure vessels with surface cracks, and the shape of surface cracks was compared with the commonly used semi-elliptical shape. In the future, these results will be used to predict the remaining life of the pressure vessel in consideration of fracture mechanics.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.3
• /
• pp.151-164
• /
• 2011

Mineralogical and petrological characteristics were investigated on matrix of dense gray, vesiculate gray, brown and black pumice in Ulleung Island by using XRD, FT-IR, XRF, SEM and thermal analysis. According to the analysis, most of pumice matrix are amorphous and include very small amount of sanidine and anorthoclase. Since the adsorption moistures, which commonly observed as O-H peak in FT-IR spectrum, are not identified in thermal analysis, it seems reasonable to conclude that content of the adsorption moisture has very low level. Although pumice has a large specific surface area, with long time elapsed after eruption, pumice matrix shows very low degree of hydration alteration due to the low level of water content. In SEM images, most surfaces of pumice show morphological characteristics such as various shapes of vesicle with wrinkled and thin walls resulted from ductile coalescence. Dense gray pumice formed in the initial stage includes small vesicles less than $15{\mu}m$ in size with subangular to angular shapes, free of ovoid vesicle. These characteristics are interpreted to have related to the hydrous environment derived from phreato-plinian eruption. Submicron particles observed as amorphous alumina silicate assemblages in vesicle surface are considered as particles sticked to the matrix surface through rapidly cooling process during ascent of alkali phonolitic magma. It indicates that these particles coexisted partly with crystallized alkali feldspar.

• Composites Research
• /
• v.16 no.3
• /
• pp.1-8
• /
• 2003

Densification occurs by the inelastic flow of the matrix materials during the consolidation processes at high temperature for MMCs, and the results depend on many process conditions such as applied pressure, temperature and volume fraction of fiber and matrix materials. This is particularly important in titanium matrix composites since material failure may occur by either the applied conditions or microstructural parameters through the processes, and thus a generic model based on micro-mechanical approaches enabling the evolution of density over time to be predicted has been developed. The mode developed is then implemented into FEM so that practical process simulation has been carried out. Further the experimental investigation of the consolidation behavior of SiC/Ti-6Al-4V composites using vacuum hot pressing has been performed, and the results obtained are compared with the model predictions.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.91-96
• /
• 2021

This study was conducted to improve the operating conditions of an adsorption tower filled with potassium impregnated activated carbon for high hydrogen sulfide capture capacity. Heat treatment modified the surface properties of activated carbon, and ultimately determined its adsorption capacity. The activated carbon doped with potassium showed 57 times more adsorption at room temperature than that of using the raw adsorbent. It is believed that uniform pore formation and strong bonding of the potassium on the surface of carbon contributed to the chemical and physical absorption of hydrogen sulfide. The SEM analysis on the surface structure of various commercial carbons showed that the modification of surface properties through the heat treatment generated the destruction of pore structures resulted in the decrease of the absorption performance. The pressure drop across the activated carbon bed was closely related with the grain size and shape. The optimum size of irregularly shaped activated carbon granules was 2~4 mesh indicating economical feasibility.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.259-267
• /
• 2006

The critical breakthrough pressure through both porous PVDF (polyvinylidenefluoride) and PTFE (poly-tetrafluoroethylene) was measured using pure water, $0.1M{\sim}4.0M$ NaOH aqueous solutions and $0.1M{\sim}3.0M\;NaHSO_3$ aqueous solutions. The critical breakthrough pressure through PTFE was observed to be higher than that through PVDF membrane at the same pore size. The critical breakthrough pressure decreased as the molar concentration of NaOH increased up to 1.0 M reaching the minimum and then increased further after 1.0 M NaOH up to 4.0 M NaOH. On the other hand, the critical breakthrough pressure measured using $NaHSO_3$ aqueous solutions was decreased with increasing the concentration of $NaHSO_3$. The critical breakthrough pressure could be well interpreted with Cantor's equation.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.518-527
• /
• 2004

In this study, SiC whiskers were grown in porous alumina substrate in order to enhance the filtering efficiency, performance, and durability by controlling pore morphology. This experiment was performed by Chemical Vapor Infiltration (CVI) in order to obtain the whiskers on the inside of pores as well as on the surface of porous the A1$_2$O$_3$ substrate. The deposition behavior was changed remarkably with the deposition position, temperature, and input gas ratio. First, the mean diameter of whisker was decreased as the position of observation moved into the inside of substrate due to the reactant gas depletion effect'. Second, the deposition temperature caused the changes of the deposition type such as debris, whiskers and films and the change in morphology affect the various properties. When SiC films were deposited. the gas permeability and the specific surface area decreased. However, the whisker showed the opposite result. The whiskers increase not only the specific surface area and minimizing pressure drop but also mechanical strength. Therefore it is expected that the porous alumina body which deposited the SiC whisker is the promising material for the filter trapping the particles.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1183-1189
• /
• 2002

In order to develope the porous alumina ceramics with high strength, the pore characteristics and compressive strength were investigated in terms of relation to the conditions of spark-plasma sintering and the contents of graphite as a pore precursor. Porous alumina bodies were successfully prepared by spark-plasma sintering and burning out graphite in air. High porous bodies were fabricated by sintering at 1000${\circ}C$ for 3 min under a pressure of 30 MPa, heating rate of 80${\circ}C$/min and on-off pulse type of 12:2. For example, alumina bodies prepared by the addition of 10∼30 vol% graphite showed high porosity of 50∼57%. Also, the open porosity increased with graphite content. The relationship between pore characteristics and graphite contents could be explained by percolation model depending on cluster number and size. Porous alumina bodies prepared by the addition of 10∼30 vol% graphite showed the high compressive strength of 55∼200 MPa. This great improvement in strength was considered to be mainly due to the spark-plasma discharges and the self-heating action between particles.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.6
• /
• pp.12-20
• /
• 2008

The efficient plan and numerical methods for development of the interior ballistics code have been investigated. The schemes of the numerical code for the moving boundary with the projectile movement have been compared and verified through the free piston motion problem. The combustion of solid propellants and the pressure gradient in the chamber by the porosity effect have been predicted based on the numerical calculation of the initial combustion of the interior ballistics. Computerization techniques of the fundamental schemes and plans for development of the numerical analysis code for the interior ballistics have been obtained.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.85.1-85.1
• /
• 2018

고표면적 다공성 금속 박막 형성 기술은 타겟에서 방출된 금속 원자들이 타겟 주변에서 서로 충돌하여 나노입자를 형성한 후 기판으로 입자를 이송시켜 나노 구조를 지니는 박막을 성장시키는 기술이다. 고표면적 다공성 금속 박막 형성 기술로 제작한 다공성 박막은 열린 기공 구조를 지니고 있기 때문에 외부 기체의 확산이 용이하고 비표면적이 높다는 특징을 가지고 있다. 특히 금속 공기 이차전지 등의 배터리의 경우 전극의 비표면적이 성능을 결정하는 중요한 인자이므로 금속판을 사용하는 경우 대비 비표면적이 높은 나노구조를 사용할 경우 용량 증대에 유리하다. 본 연구에서는 공정 압력, 공정 파워, 타겟과 기판과의 거리, 칠러 온도 등 증착 공정 변수를 제어하여 표면적이 높은 아연 나노 구조를 형성하였다. 이를 분석하기 위해 SEM을 이용하여 미세구조 및 두께를 관찰하였으며, 박막 증착 전후의 무게를 측정하여 기공률을 계산하였다. 또한 XRD 분석을 통하여 결정성 및 결정의 크기를 확인하였다. 이렇게 제작된 고표면적 다공성 Zn 금속박막을 응용하여 아연 전지 성능 평가를 진행하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.689-695
• /
• 2016

The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.