• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.101-104
• /
• 2007

700 $^{\circ}C$이상의 온도에서 실시되는 고온수전해는 다가오는 수소경제시대의 주요한 수소제조기 술로 주목되고 있다. 이 연구에서는 Ni보다 전기전도도가 우수하고 가격이 저렴한 Cu를 사용하여 고온수 전해 수소극용 Cu/YSZ 복합체를 기계적합금법에 의해 제조하여 미세구조를 관찰하였고 Cu/YSZ를 수소전극으로 한 반전지를 제조하여 수조제조 실험을 실시하였다. Cu/YSZ 복합체는 Cu와 YSZ를 6:4(vol%)의 조성비로 유성밀을 사용하여 400 rpm으로 24시간 동안 실시하여 제조하였다. 고에너지 볼밀 후 500 nm이하의 나노크기의 복합체가 제조되었으며 Cu입자에 YSZ가 고르게 분포되어 있었다. 수은압입법으로 측정한 기공률은 70%이고 기공크기는 평균 0.5 ${\mu}m$으로 미세한 기공으로 이루어져 있었다. 제조된 Cu/YSZ 복합체를 수소전극으로 한 반전지를 제조하여 수소제조 실험을 실시한 결과 Ni/YSZ 전극보다 수소제조 성능이 우수한 것으로 나타났다. Cu의 높은 열팽창계수와 낮은 녹는점을 보완하면 우수한 고온수전해용 전극재료로 사용될 것으로 판단된다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.99-104
• /
• 2003

Alumina/zirconia-glass composites prepared by melt-infiltration were investigated to evaluate the influence of zirconia addition on mechanical and optical properties of the composites and glass penetration kinetics. The infiltration distance was parabolic with respect to time as described by the Washburn equation and the penetration rate constant, K, decreased due to the reduction In pore size as the amount of zirconia rose. The zirconia addition increased lightness ($L^*$) but reduced K, transmittance and color sharpness ($C^*$) It can be concluded that the zirconia addition was not effective to the mechanical properties of the composites due to the increase in porosity even though the toughness of the composites increased when zirconia was added up to 15 wt%.

• Journal of the Korean Ceramic Society
• /
• v.37 no.9
• /
• pp.879-886
• /
• 2000

고온용 전기.열 절연재의 유리모재로 사용하기 위한 산화크롬함유 인산염 유리 복합체의 소결거동, 물성, 그리고 미세구조변화를 연구하였다. 단미의 유리는 점성유동에 의한 1단계 소결수축을 보이나 복합체는 점성유동 및 반응 액상소결에 의한 2단계 수축을 보였다. 단미 유리는 소결온도 증가에 따라 재기공율이 감소하고 기공크기가 작아지지만 93$0^{\circ}C$ 이사에서는 폐기공이 생성되면서 기공이 성장함을 보였다. 복합체 소결밀도는 산화크롬 증가에 따라 감소하였으며, 특히 산화크롬 40% 이상에서는 percolation에 의해 소결수축율이 급격히 저하하였다. 복합체의 곡강도는 산화크롬 증가에 따라 거의 직선적으로 감소한 반면 열팽창율은 오히려 급속히 증가함을 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.711-718
• /
• 2017

Silver nanoparticles were attached by chemical reduction after synthesizing a porous PVK-CTA complex. The PVK-CTA complex was synthesized by polymerizing N-vinylcarbazole in a CTA-chloroform solution using iron(III) chloride as an oxidizing agent and a honeycomb-pattern with uniformly formed macropores was formed by applying steam to the complex surface soaked with a volatile solvent under humid conditions. Using TTF as a reducing agent and PVP as a dispersant, silver nanoparticles were attached on the Honeycomb-pattern complex surface through chemical reduction. The formation of the complex was confirmed by FT-IR and UV-Vis spectrometry, and the degree of thermal decomposition of the complexes was analyzed after N-vinylcarbazole was polymerized by varying its concentration. The uniformity of the pores on the composite surface and the dispersibility of the attached silver nanoparticles were investigated by SEM. The dispersibility of the silver nanoparticles was also analyzed by varying the concentrations of reducing agent and dispersant and precursor.

• Korean Journal of Plant Taxonomy
• /
• v.48 no.2
• /
• pp.143-152
• /
• 2018

A comparative study of leaf epidermal microstructures in genus Aruncus (two species, five varieties) was carried out using scanning electron microscopy in order to evaluate their significance in terms of taxonomy. All of the leaves of the taxa studied here were amphistomatic with undulate anticlinal walls, and smooth and flat periclinal walls on both surfaces. The size range of the stomata complex is $8.95-21.97{\times}7.50-16.99{\mu}m$: the largest one was found in Aruncus dioicus var. astilboides (average $18.01{\times}13.47{\mu}m$) and the smallest was measured and determined to be A. gombalanus (average $11.11{\times}8.94{\mu}m$). An anomocytic stomata complex was found in all of the studied taxa. The stomatal frequency on average was $27.54/0.05mm^2$; it is highest in A. gombalanus ($60.4/0.05mm^2$) and lowest in A. dioicus var. acuminatus ($11.6/0.05mm^2$). Two types (short stalked capitate glandular trichome and non-glandular trichome) of trichomes are found in the leaves. The non-glandular trichome was divided into three types based on the presence and degree of development of subsidiary cells. Anomocytic stomata of the hypostomatic type and the distribution pattern of capitate glandular trichomes were the major characters in this genus. The stomata size and frequency, the epidermal cell structure, the trichome type and the distribution pattern may have diagnostic importance among the taxa in the genus. Our leaf micromorphological results provide useful information for the taxonomic revision of the genus Aruncus.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.2
• /
• pp.118-127
• /
• 2013

A comparative study of leaf epidermal microstructure in tribes Forsythieae (Abeliophyllum: 1 species, Forsythia: 12 taxa - 10 species, 2 varieties), Fontanesieae (Fontanesia: 2 species) including one related genus Myxopyrum belonging to Myxopyreae (Myxopyrum: 5 taxa - 4 species, 1 subspecies) was carried out using scanning electron microscopy (SEM) in order to evaluate their significance in the taxonomy. The leaves of investigated taxa are either hypostomatic or amphistomatic, but former is more frequent. The size range of the guard cells is 17.14-47.58 ${\times}$ 11.59- 44.25 ${\mu}m$: the smallest one was found in Forsythia giraldiana (17.48-22.96 ${\times}$ 11.64-12.88 ${\mu}m$), while the largest one was measured to Myxopyrum pierrei (31.50-41.75 ${\times}$ 32.53-44.25 ${\mu}m$). Anomocytic stomatal complex are most frequent type (rarely paracytic), usually both anomocytic and anisocytic occur in one leaf. In surface view both adaxial and abaxial anticlinal walls of the subsidiary cells are variable (e.g., straight/curved, undulate, sinuate, undulate/sinuate). Three types (simple unicellular and multicellular non-glandular, subsessile glandular) of trichomes are found in leaves. Finally, the systematic significance of the leaf epidermal micromorphological characters in idenfitication and elucidation of these tribe, between or within the genera including among the species is also briefly discussed.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.51-56
• /
• 2023

Composite membranes consisting of TiO₂ nanoparticles (NPs) and porous polymers have been widely utilized in photocatalytic water treatment because the composite membranes can allow an easy recovery of NPs after the photocatalytic reaction as well as the reduction of fouling in the membrane. However, the photocatalytic efficiency of the immobilized TiO₂ NPs in the composite membranes has been discussed to a limited degree. In this study, we prepared polyethersulfone (PES)/TiO₂ composite membranes to study the photocatalytic decomposition of organic dyes under light illumination. The decomposition kinetics of dye molecules by the PES/TiO₂ composite membranes and colloidal TiO₂ NPs have been compared to discuss the photocatalytic efficiency of NPs before and after their immobilization on the polymer membrane.

• Composites Research
• /
• v.30 no.2
• /
• pp.108-115
• /
• 2017

Among several fabrication processes of $SiC_f/SiC$ composites, the chemical vapor infiltration (CVI) process has attractive advantages in manufacturing complex net-or near-net-shape components at relatively low temperatures, easily controlling the microstructure of the matrix and obtaining the highest SiC purity level. However, it has disadvantages in that the ratio of residual pores in matrix is higher than other processes and processing time is relatively long. To reduce the residual porosity, the whisker-growing-assisted CVI process, which is composed of whisker growth and matrix filling steps has been developed. The whiskers grown before matrix filling may serve to divide the large natural pores between the fibers or bundles so that the matrix can be effectively filled into the finely divided pores. In this paper, the fundamentals of the CVI process for preparation of $SiC_f/SiC$ composites and some experimental results prepared by CVI and whisker-growing-assisted CVI processes are briefly introduced.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.566-571
• /
• 2003

Hydroxyapatite (HAp)/Polyacrylic Acid(PAA) homogeneous composites of four different composition ratio were preparation by co-precipitation process with synthetic HAp and PAA as a binder. HAP/PAA composites were molding by cold isostatic pressing and were sintering by various condition in air. Crystallinity and structure of sintered HAp/PAA composites were investigated by XRD and FT-IR. Also, the compressive strength and the fracture surface of sintered specimens were measured by UTM and SEM. HAp/PAA composites were showed phase transformation of partially ${\alpha}$, ${\beta}$-tricalcium phosphate at sintering condition of 1200$^{\circ}C$ and 3 h. The pore size and porosity of sintered body were showed the range of 0.2∼3.0 $\mu\textrm{m}$ and 0.49∼13.43%, respectively. The compressive strength of sintered specimens were appeared the range of 36.6∼58.2 MPa. From these results, the sintered HAp/PAA comosites can be accounted for the microporous HAp having a good compressive strength due to homogeneous pore morphology.

• Elastomers and Composites
• /
• v.45 no.1
• /
• pp.7-11
• /
• 2010

The acetylene black/silica composite particles were prepared by a simple and fast method using polyethylenimine (PEI) as a coupling agent. The composite particles were produced via the following two steps; adsorption of PEI on the surface of acetylene black particles and synthesis of silica by sol-gel process. The morphology of the composite particles was a core-shell, and a large number of micropores was created after silica was synthesized on the acetylene black surface.