• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.70-73
• /
• 1991

Stomatal frequency and size of rice plant grown in the different silicon levels of the culture solution in phytotron were observed on both side of the 7th leaf blade. By the application of silicate, stomatal frequency and rates of stoma cell area to the leaf area were remarkably reduced in Milyang 23. It could be considered as favorable characteristics which might be reduced the transpira-tion rate from leaf surface of rice plant besides presence of cuticle-silica double layer in leaf surface.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.2
• /
• pp.130-136
• /
• 1982

Experiments were conducted to establish a measuring method of the stomatal aperture in the leaves of the wheat plant, and to find the diurnal movements of the stomate in leaves of different position and tillers. The measurement methods used were the infiltration and the microrelief impression methods. The aperture of the stomate in the infiltration method was expressed in terms of the solutions pent ration into the leaf and this was refered to as the infiltration score. A score I represents injection with 10% iso-butyl alcohol＋90% ethylene glycol solution and a score 7 represents injection with 70% iso-butyl alcohol +30% ethlene glycol solution. A linear relationship was obtained between the infiltration score and average pore width in a large number. of the stomata observed in the leaves of the adaxial and abaxial epidermis. The aperature of the stomate of flag and the 1st leaf were exhibited diurnal change with the maximum aperture at 10 A.M. but that of 2nd leaf reached maximum aperture 2 hours later than upper two leaves. After reaching the maximum aperture the stomata gradually closed and then completely closed at 6 P.M. The aperture of the stomate in the adaxial epidermis and the base part of the leaf were larger than those in the abaxial and top part of the leaf, and aperture of the stomate in the leaves of the main stem was larger than those on the tillers.

• Journal of Technologic Dentistry
• /
• v.16 no.1
• /
• pp.115-118
• /
• 1994

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.57.1-57.1
• /
• 2012

금속을 용해 응고시킬 때 생성되는 소위, 주조 결함이나 소결금속 내의 기공은 재료의 성능이나 강도를 현저하게 낮추는 결함으로서 예전부터 기피되어 왔다. 또한, 재료공정에 있어서도 여하의 기공이나 기포가 없는 치밀한 고강도 및 고기능성 재료를 개발하는 것에 최대한의 주의와 관심을 기울여 왔다. 반면에 자연계의 천연물이나 인공물을 둘러보면 그 대부분이 다공질임을 쉽게 눈치챌 수 있다. 예를 들어 목재, 지엽 등의 생물을 시작해서 콘크리트 등의 인공물, 우리 체내의 뼈도 전형적인 다공질구조로 구성되어 있다. 이러한 구조로부터 재료의 재질제어 이외에 구조제어라는 새로운 어프로치를 고려할 수 있고, 최근 들어, 금속재료에 있어서도 이러한 다공질 구조에 관한 연구가 활성화되어 충격흡수재, 생체재료, 베어링재료 등의 다양한 응용이 전개되고 있다. 원주상의 방향성 기공을 갖는 로터스 금속의 제조 원리는 용융금속의 높은 가스용해도와 고체금속의 낮은 가스고용도의 차이를 이용하여 응고할 때 고용되지 않는 가스원자가 기포를 형성시키는 것이다. 수소용해도는 모든 금속에 있어서 온도상승에 따라 증가하지만 융점에 있어서 용해도의 불연속적 증가를 나타내며 응고할 때 고액계면에서 다량의 가스를 방출하고 기공 생성을 야기한다. 특히, 고 액상에 있어서 수소용해도 차가 큰 마그네슘, 니켈, 철, 동 등은 기포를 생성하기 쉽다. 또한 기공의 배열구조를 제어하기 위해 일방향응고법를 이용하여 기공에 방향성을 부여한다. 외관상 기공구조가 연근뿌리를 닮은 것으로 부터 로터스 금속이라는 명칭이 널리 알려져 있다. 이와 같은 제조방법에 의해 로터스 금속은 기공 방향, 기공크기, 기공률을 자유롭게 제어할 수 있고 우수한 기계적 성질이 기존의 발포금속, 소결금속과 전혀 다른 특성을 가지고 있다. 이러한 기공구조는 용해온도, 응고속도, 분위기 가스압, 불활성가스와의 혼합체적비 등의 제어를 통해서 조절할 수 있다. 이와 같이 제조한 방향성 다공질금속은 BT (인플란트, 생체적합성, 저탄성, 경량), ST (초음속기엔진부품, 경량), IT (고성능수냉모듈), ET(고온촉매, 필터)의 분야로의 응용을 기대한다.

• Clean Technology
• /
• v.28 no.3
• /
• pp.249-257
• /
• 2022

The adsorption equilibria of nitrogen on a region of nanoporous carbonaceous adsorbent with local molecular orientation (LMO) were calculated by grand canonical Monte Carlo simulation at 77.16 K. Regions of LMO of identical size were arranged on a regular lattice with uniform spacing. Microporosity was predominately introduced to the model by removing successive out-of-plane domains from the regions of LMO and tilting pores were generated by tilting the basic structure units. This pore structure is a more realistic model than slit-shaped pores for studying adsorption in nanoporous carbon adsorbents. Their porosities, surface areas, and pore size distributions according to constrained nonlinear optimization were also reported. The adsorption in slit shaped pores was also reported for reference. In the slit shaped pores, a clear hysteresis loop was observed in pores of greater than 5 times the nitrogen molecule size, and in capillary condensation and reverse condensation, evaporation occurred immediately at one pressure. In the LMO pore model, three series of local condensations at the basal slip plane, armchair slip plane and interconnected channel were observed during adsorption at pore sizes greater than about 6 times the nitrogen molecular size. In the hysteresis loop, on the other hand, evaporation occurred at one or two pressures during desorption.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.13 no.1
• /
• pp.14-25
• /
• 2007

기공시유구역사전통적문화(氣功是悠久歷史傳統的文化), 해탈생로병사고통적수련법(解脫生老病死苦痛的修練法), 거병건신(祛病健身), 심신단련(心身鍛鍊), 수명장수적양생법(壽命長壽的養生法). "기공"("氣功") 취시행기공부(就是行氣功夫), 이수련수행(以修練修行), 예방정신화육체질병(豫防精神和肉體疾病), 건강신체(健康身體), 연년익수(延年益壽), 기공적수련방법(氣功的修練方法), 유수형태(有數形態), 육체화정신적건강(肉體和精神的健康), 시의료기공(是醫療氣功), 의료기공시검토점(醫療氣功是檢討點), 통과고대의서적정리(通過古代醫書的定理). 의료기공시다개형태변화(醫療氣功是多個形態變化), 불교전파화일기(佛敎傳播和一起), 불가기공취재일개문파불가수련활동중형성(佛家氣功就在一個門派佛家修練活動中形成). 불가기공시(佛家氣功是), 수행자소추구적(修行者所追究的), 유지건강육체적기공법(維持健康肉體的氣功法). 의료기공적모습화구도적모습(醫療氣功的模襲和求道的模襲), 시혼합형태(是混合形態). 현재(現在) 불가기공지원류(佛家氣功之原流) 가이설시소림역근경(可以說是少林易筋經). 저본논고취시이의료기공적관점래접근소림역근경(這本論考就是以醫療氣功的觀點來接近少林易筋經).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.1-5
• /
• 2007

SiOC films were made using the oxygen and bistrimethylsilylmethane mixed precursor. The chemical properties of SiOC films divided into three properties, organic, hybrid and inorganic depending on the flow rate ratio between oxygen and bistrimethylsilylmethane precursor. The films with organic properties decreased dielectric constant, because of pore incorporation in final materials. In this study, the porosity of SiOC films with organic properties was investigated using the Makwell-Garnett equation. The porosity of the films could be correlated with the blue shift in the infrared spectra scopy, and increased with the decreasing the dielectric constant of the film.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.27-27
• /
• 2018

알루미늄은 취약한 내식성을 보완하기 위하여 나노다공성의 산화물 피막을 형성하는 양극산화 처리를 주로 활용한다. 이러한 나노다공성 산화물 피막에 소수성 처리와 불용성의 윤활유를 침지하면 표면에 접촉하는 물을 비롯한 다른 유체들의 젖음성을 크게 감소시킬 수 있으며, 이로 인하여 부식성 물질이 다공성 구조물로 침입하는 것을 억제할 수 있다. 따라서 양극산화 피막에 윤활유 침지를 이용하여 알루미늄의 부식에 대한 저항성을 크게 향상시킬 수 있으며, 추가적으로 외부의 물리적인 손상에 대한 치유 능력을 얻을 수 있다. 이러한 성능뿐만 아니라 침지된 윤활유의 내구성은 나노다공성 산화피막의 물리적 형상에 따라 차이가 날 수 있다. 본 연구에서는 나노다공성의 양극산화 피막의 기공 구조를 다양하게 변화시켜 그 형상에 따라서 윤활유를 침지 후 알루미늄 소재의 내식성 및 자기 치유 특성의 차이에 대하여 알아보았다. 기공의 형상은 한쪽 끝이 막혀있는 기둥형, 후처리를 통한 확장된 기둥형 및 침상형의 기공 구조를 제조하였고, 전압제어를 통한 병목 형상의 기공 구조를 구현하여 그 특성 차이를 비교하였다. 기공들이 서로 고립된 형태를 가질수록 윤활유가 안정적으로 산화물에 침지될 수 있으며, 기공의 공간이 클수록 더 많이 윤활유를 포함하여 우수한 자기 치유 특성을 보여주었다. 병목 형상의 가공 구조는 내부의 충분한 크기의 기공 공간과 표면에 작은 기공을 가지고 있기 때문에 우수한 내구성과 자기 치유 특성을 보여준다.

• Clean Technology
• /
• v.29 no.4
• /
• pp.249-254
• /
• 2023

In this study, porosity estimation was conducted by the physical properties of zeolite. Because of the difficulty of directly measuring the porosity of particulate matter, the porosity was calculated by applying the measured physical properties of zeolite to the calculation formula presented in various literature. For this purpose, the average particle size, particle size distribution, specific surface area, and pore characteristics of three types of zeolite - zeolite beta, zeolite Y, and ZSM-5 - were measured. In addition, the true density using gas and liquid phases, and two types apparent density (tap and untapped density) were measured. We calculated the porosity using these results, compare and analyzed the results, and evaluated main factors that determine the porosity.

• Korean Journal of Environmental Biology
• /
• v.18 no.2
• /
• pp.263-268
• /
• 2000

The effect of $Cd^{2+}$ on stomatal apertures of epidermal strips and intact leaves in Commelina communis L. was investigated. Cadmium stimulated stomatal opening. The stomata, treated with 100 $\mu$M $Cd^{2+}$ opened to a degree of about 8.38 fm, but the stomata, treated with no cadmium opened to 3.74 ${\mu}{\textrm}{m}$. In order to show that there was no mechanical or osmotic impediment preventing the stomata in the epidermal strips, salicylic acid (SA) and abscisic acid (ABA) were used. The treatment of 100 $\mu$M SA and 1 $\mu$M ABA inhibited 14% and 28% of stomatal opening, respectively. Other heavy metals such as $Al^{3+} and Ag^{2+}$ were also used to investigate the effect of the stomatal apertures. The treatment of $Al^{3+} and Ag^{2+}$ also stimulated 19% and 41% of stomatal opening. To understand how cadmium open stomata, the effect of cadmium on the K+ influx into the epidermal strips was investigated. $Cd^{2+}$, SA, ABA inhibited 98%, 28%, 34% of K+ uptake respectively. 3-weeks old Commelina was transferred to and grown in Hoagland solution (0,5 mM $Cd^{2+}$, 10 mM $Cd^{2+}$) for 4 days and stomatal conductance were measured. The treatment of 5 mM $Cd^{2+}$ and 10 mM $Cd^{2+}$ showed about 51% and 70% inhibition of stomatal conductance, respectively Therefore, it could be concluded that stomata in epidermal strips and intact leaves behaved differently and cadmium- stimulated stomatal opening was due to the result of cadmium uptake into the epidermal strips instead of K+. [cadmium, stomata, stomatal conductance]