• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.921-926
• /
• 2014

In this paper, the characteristics of inset fed microstrip antenna loaded with CSLR(complementary single loop resonator) are studied. Effective permeability parameters of the SLR unit cell is retrieved from simulated scattering parameters, and structure parameters of the SLR unit cell are selected so that effective permeability is negative value at the operating frequency. The optimized inset fed microstrip antenna loaded with SLR for a $3{\times}3$ array in the ground plane of a conventional patch antenna is designed and simulation results of return loss and radiation pattern are shown. At resonant frequency 2.82 GHz, the overall dimension of the proposed antenna is reduced by approximately 56.8% compared to the conventional inset fed antenna. Simulation results are obtained by 3D FEM solver(Ansoft's HFSS).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.851-857
• /
• 2002

A two-arm microstrip spiral antenna with a circular aperture on the ground plane that generates a circularly polarized conical beam is presented in this paper. We obtained circularly polarized conical beam by using two spirals that are excited in-phase from the microstrip feed lines. The main beam directions of the conical beam from the broadside are approximately 40$^{\circ}$ in the range from 5 GHz to 6.5 GHz, and 58$^{\circ}$ from 9 GHz to 11 GHz. Since the proposed antenna has omni-directional conical beam pattern, it is suitable for use in mobile communication systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.188-193
• /
• 2004

In this paper, a microstrip array antenna utilized a subarray with a waveguide slot feeding is presented. This subarray can reduce the feed loss compared with a full microstrip feed network. The subarray has been designed both for a broad reflection bandwidth and a flat gain bandwidth from 40.5 GHz to 43.5 GHz. The 24${\times}$24 series-fed array antenna has been implemented with the maximum gain of 32.4 dBi.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.2
• /
• pp.19-27
• /
• 2001

All accurate and efficient antenna feed model is very important for computing GPR response using the FDTD method In literature, there are several feed models such as the equivalent network in angular-frequency domain, 1-D transmission-line cell， voltage boundary condition in time domain, etc. In this paper, theoretical relationship among the models is investigated. It is found that the above three models become equivalent when a short and lossless feed line can match with its connected transmitter receiver). In view of accuracy and efficiency of the simulation, the FDTD results according to the feed models arc compared with the measured data of the receiving responses for an actual GPR system.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.694-698
• /
• 2005

The operation speed improvement of the train in electric railway must pursue continuously and need the investigation of whole railway system whole. The high-speed of the train is related to not only vehicle technique but also the infrastructure, signal system, operation technique, the trolley line and catenary, economical efficiency. Specially, in case of electric railway, we have to consider a technical investigation which is current collection efficiency improvement, voltage drop countermeasure, equipment capacity, track force, signal system. In this paper, we presents the technical investigation of AT feeder system in order to achieve high speed train in exist real railroad. We proved this approach which will use the whole domestic lines in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.55-56
• /
• 2017

In this paper, a wideband loop antenna is designed using a CPW feeding method for indoor digital TV applications. The proposed loop antenna consists of a square loop and two circular sectors which connect the loop with central feed points, and the CPW feed line is inserted in the lower circular sector. The CPW feed line is designed to match with the 75 ohm port impedance for DTV applications, and the ground slots are etched in order to improve the impedance matching in the middle frequency region. The optimized antenna is fabricated on FR4 substrate, and the experiment results show that it operates in the frequency band of 463-1,280 MHz for a VSWR < 2, which assures the operation in the DTV band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.4B
• /
• pp.406-409
• /
• 2001

본 논문에서는 IMT-2000 대역에서 전방급전 전력증폭기의 선형성을 개선하여 효율과 대역폭을 극대화 하기 위해 Photonic Bandgap(PBG), 전치왜곡, 2차고조파 튜닝 방식으 f동시에 주 증폭기에 적용하였다. 2차 하모닉 성분이 2차고조파 튜닝 방식에 의해 우수하게 제거되고, 3차 하모닉 성분이 전치왜곡 방식에 의해 제거되며 출력단위 PBG느 s고아대역 특성으로 4차 하모닉 이상까지 제거하는 우수한 특성을 보여주었다. 총체적으로 기존의 전방급전 전력증폭기보다 IMD가 최고 15dBc, 효율은 4%, 대역폭은 2배이상 확대됨으로 전력효율과 대역폭을 극대화시킬 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2585-2587
• /
• 2005

본 논문은 전차선 급전 케이블 자동가설 로봇의 이동제어를 나타내었다. 작업로봇의 차륜 구동부를 모델링하여 이동제어 시스템이 작업로봇의 이동에 유용한 것을 구명하였다 실험을 하여 실용성을 검토하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.394-397
• /
• 1998

본 논문에서는 중심에 급전 소자를 갖는 원형 배열다이폴 안테나의 이득 특성을 검토하고 있다. 중심 안테나 소자의 길이와 급전 안테나를 적절히 선택하여 무 급전 소자의 유도 전류에 의한 안테나의 지향성 및 이득 특성을 변화시킬 수 있도록 반경과 중심 안테나의 길이를 적절히 선택하고 있다. 수치계산 결과, 원형 배열의 반경과 중심 안테나의 길이를 적절히 선택하므로서 고 이득의 특성을 얻을 수 있었다.

• 전기의세계
• /
• v.12
• /
• pp.35-42
• /
• 1963

교류철도전화의 급전회로는 전원계통과 전원용변압기의 impedance도 생각하여야하겠으나, 이에 관한 것은 일반 송전문제에 양기되어 있고, 또 전차선로의 급전회로의 impedance가 중요한 입치를 점할뿐만 아니라 전차선로의 급전회로는 1선접지의 단상회로로서 접지측은 rail을 도체로 하여 대지상에 노출된 궤도상의 사이와 침목을 매개로 한 반접지상태의 특수한 회로를 구성하고 있으므로, 일반서지에 기술이 적은 부문에 속한 것같아 여기에 전차선로에 대한 impedance 를 산정하는 실험식과 예를 들어보기로 한다.