• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2006

The free-piston hydrogen fueled engine is estimated as the next generation power system which can obtain high efficiency and low emission, simultaneously. In order to develop the free-piston hydrogen fueled engine, it is necessary to stable the combustion. The engine combustion, backfire and knock phenomenons were studied by using RICEM for researching combustion characteristics of free-piston engine. As the results, backfire occurrence was not observed in the free-piston engine under limited experimental condition. And knocking occurred in case of higher cylinder wall temperature.

• Journal of the korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.10-17
• /
• 1981

연료의 가격이 높아지고 대체연료의 개발이 급속동로 진전되고 있는 오늘날 디이젤기관은 열효율 의향상과 장래연료에의 대응이 중요한 과제로 되어있다. 대체연료로서 유망시되고있는 석탄약화 연료, 알코호르 쉘오일(Shell Oil)등이 앞으로 싱용화되면 제업이나 플랜트의 규모에 따라서는 가격뿐만 아니라 그질에도 큰 차이가 있게되고 정도나 비중의 변화등으로 대표적인 세탄가의 저화가 예상되어서 현상 디이젤기관의 연소방식 그대로는 이에 대응 할 수 없게될 가능성이 높다. 이들에 대응하기의한 하나의 방법으로서 기관을 단열화함으로써 냉각손실을 저장시키고, 높아진 배기에너지를 축출력으로서 다시 회수하는 단열터어보 컴파운드엔진의 개념이 있다. 이 렇게 하면 열효율의 대표적인 개성과 아울러 단열화하여서, 연소실의 벽온이 높아지므로 저세 탄가 연료의 연소도 가능하게 된다. 단열기관의 착상은 1940년대 융커어스사의 2-사이클 수평 대향기관에 이미 일부 채용되었었고, 또 터어보 컴파운드에 의한 배열의 회수도 Lycoming사 R3350 엔진등에서 실용화되었던 예가 있다. 그러나 이들을 동시에 채용하여 대돌적인 연비저 강효과를 추구한 실제의 예로서는 근년 미국 육군의 위탁으로 Cummis사가 연구성과를 발효하고 있는것 뿐이다. 그리고 일본의 Komatsu사가 또한 독자적으로 단열터어보 컴파운드기관의 연 구를 하고 있다. 다음은 그 기관을 소개하고 또한 다종연료성등 단열엔진의 특성에 대하여 설명 한다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.3
• /
• pp.97-104
• /
• 2005

In this study, the change of water content, pH, and combustion weight on the decomposition of poly ester vinyl and high density poly ethylene were examined. The poly ester vinyl was degraded by microorganism in food wastes for 30 days, while high density poly ethylene vinyl was not degraded. Also, the poly ester vinyl was rapidly degraded after the 10 days of operation and its weight was decreased. In the combustion reaction between $300^{\circ}C$ and $600^{\circ}C$, complete combustion was performed. Due to the degradation of poly ester vinyl by microorganism in food waste, the pH was increased from 4.26 to 7.6. During of 60 days operation, poly ester vinyl was degraded over 90%.

• Journal of the Korean Society of Combustion
• /
• v.21 no.2
• /
• pp.7-14
• /
• 2016

Evaporation and combustion characteristics of fuel droplet with carbon nanoparticle were investigated in a rapid compression machine(RCM). RCM is an experimental equipment to simulate one compression stroke of reciprocating engine. Nitrogen was charged into reaction chamber for evaporation experiment, while oxygen was charged for combustion experiment. N990 carbon black and n-heptane were used to synthesize the carbon nanofluids. Surfactant, span80, was used to make synthesis easier. The droplet pictures were taken using a high speed camera with 500 frames per second. Thermocouple, of which tip is $50{\mu}m$, was used not only to measure transient bulk temperature, but also to suspend the droplet. Reaction chamber temperature was calculated from pressure data. The evaporation rate of nanofluids was improved compared to pure fuel. The ignition delay was promoted due to the nanoparticle, but the burning rate was decreased.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.236-237
• /
• 2002

원자력 발전소에서 사용되는 연료의 효율을 증가시키기 위해서는 반응로에서 연소된 연료에 잔존하는 미량의 란탄족 (lanthanide)과 악티늄족 (actinide) 원소를 측정하고, 동위원소 성분비를 분석하는 작업이 필요하다. 이러한 미량원소 측정에는 흡수분광학 (absorption spectroscopy) 방법이 주로 사용되고 있다. 최근 들어 단일 종 모드 (single-longitudinal mode) 반도체 레이저가 개발되면서 미량원소 분석을 위한 분광 기술이 급속히 발전하고 있다. 반도체 레이저는 동작시킬 때 전력소모가 적고, 설치 공간이 작다는 점 때문에 현장 적용이 용이하므로 미량원소 측정 연구의 광원으로 많이 활용되고 있다. (중략)

• LP가스
• /
• v.20 no.2
• /
• pp.59-67
• /
• 2008

지난 4월 2일 GAS KOREA 2008 전시회가 개최된 서울무역전시장에서 '한국DME협회 분과발표회'가 열렸다. 이날 분과발표회에서는 'DME Demo 플랜트 현황소개(한국가스공사 연구 개발원 조원준 박사 "DME 연료실증, 시험연구 사업현황(한국가스공사 연구개발원 백영순 박사)" 커먼레일형 연료공급계를 탑재한 2리터급 DME 차량개발(자동차 부품연구원 정재우 박사) "급속압축장치를 이용한 불균일 예혼합기의 DME HCCI연소 과정에 관한 연구(울산대학교 임옥택 교수) DME의 자착화 측정 및 세탄가의 추정(인하대학교 이대엽교수)" 직접분사식 압축착화기관에서 DME연료의 분무미립화 및 배출물 특성(한양대학교 이창식 교수)' 에 대한 발표도 이뤄졌다.

• Journal of the korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.17-20
• /
• 1979

Transistor식 점화장치는 자동차의 배기 공해대책, 연료저감대책 등의 방안으로 근래에 급속히 발전된 System이다. Transistor 점화장치로 요구되는 배경은 다음과 같다. [1] 화화출력이 커져서 Engine에 있어서 확실한 연소가 기대되고 배기정화책 연료저감책에 유 효하다. [2] 기계적인 접점이 없으므로 장기적으로 Engine의 성능을 일정하게 유지한다. [3] 저회전에서 고회전까지 높고 안정된 화화출력을 갖고 있기 때문에 시동특성 고속특성이 양 호하다. [4] 점화시기제어에 신기능부가가 용이 이와같은 목표를 달성하기 위하여 세계각국의 자동차 Maker는 각각의 독자적인 System 회로방식을 개발하여 Transistor점화장치를 실용화하고 있 으나 우리나라에서는 아직도 자동차에 기계식 점화장치를 사용하여 생산하고 있는 실정이다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.8-14
• /
• 2007

Compression ignition of homogeneous charges in IC engines indicates possibilities of achieving the high efficiency of DI diesel engines with low level of NOx and particulate emissions. The objectives of this study are to further understand the characteristics of the HCCI(Homogeneous charge compression ignition) combustion and to find ways of extending the rich HCCI operation limit in an engine-like environment. DME fuel is supplied either in the form of premixture with air or directly injected in the combustion chamber of a rapid compression and expansion machine under the conditions of various equivalence ratio and injection timing. The cylinder pressure is measured and the rate of heat release is computed from the measured pressure for the analysis of the combustion characteristics. The experimental data show that the RCEM can operate without knock on mixtures of higher equivalence ratio, when DME is directly injected in the combustion chamber than introduced as a fraction of a perfect or nearly perfect premixture. Very early fuel injection timings usually employed in HCCI operation are seen to have only insignificant effects in control of ignition timing.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.23-32
• /
• 2017

Foam block, popularized as the self-interior goods, is susceptible to fire since the main material is the polyethylene flammable synthetic resin. However, it is widely used in homes, offices, and multi-use facilities. In order to understand the fire characteristics of the foam block, two kinds of foam blocks sold in the market (non-fire retardant and fire retardant) were evaluated according to standard of KS F 5660-1 (Reaction to fire test). In addition, the hazard analysis of the gas generated by the combustion of the specimen was performed using the FTIR gas analyzer. The cone calorimeter test showed that the ignition and flame combustion of both two specimens were burned as soon as the radiant heat blocking device was removed, and it was confirmed that the flame could become a rapid propagation factor during the fire. The analysis of the combustion gas through the FTIR gas analyzer showed that both the carbon dioxide and carbon monoxide classified as the common combustion gases and the acrolein, ammonia, and hydrogen cyanide causing serious damage to the human body were detected substantially. This study showed that a foam block product has high ignitionability and generates toxic gases. Hence, it is urgently required to establish the standards used for properly classifying the combustion characteristics of the material on the basis of the use conditions of a foam block product and to prepare the standards on the purpose of use.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.5
• /
• pp.69-75
• /
• 2000

Investigators who study on combustion in the cylinders of reciprocating piston type internal combustion engines have been encountered embarrassments due to the difficulties of adjusting specific parameter without interfacing other parameters such as cylinder wall temperature, composition of gas in the cylinder, existence of cylinder lubricant etc. Rapid compression expansion machine, the position and speed of piston of which are able to be controlled by means of a system controlled electrically, and actuated hydraulically could be utilized as one of the most preferable countermeasures against those difficulties. Several units of rapid compression expansion machines were developed but the speed up of frequency of piston movement still is the problem to be improved to copy with actual speed of internal combustion engines. Authors designed and manufactured a new rapid compression-expansion machine electrically controlled, hydraulically actuated, and computer programed and then examined the performance of one. Results of a set of experiments revealed acquirements of certain improvement on frequency of piston movement preserving the stability of system response and reproducing accurate compression ratio of cylinder, those are the key function for the in-cylinder combustion experiments on internal combustion engines.