• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.201-202
• /
• 2009

열간금형용강인 SKD61은 압출금형재로서 널리 사용되고 있으며, Al압출금형의 장수명화를 위한 방안으로 SKD61에 높은 경도를 갖는 TiN, CrN을 코팅하여 마모 시험을 실시하였다. 마모시험하중과 온도의 변화를 통해 각각의 코팅층의 마찰.마모 특성을 비교할 수 있었으며, 마모시험의 데이터는 직선왕복동 마모시험기를 사용하여 수집하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.259-260
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.91-92
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.715-716
• /
• 2011

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.49-53
• /
• 2019

The temperature distribution and lifetime of molds were predicted by computer simulation analysis with various spraying and blowing process of high pressure die casting. After varying the spraying angle and time, the mold temperature, heat exchange and mold life were predicted. As the spraying angle increases, the maximum temperature of the mold decreases, which is because the spraying area increases and the heat exchange with the mold increases. Heat exchange occurs more actively in the blowing process than in the spraying process. This is because the cooling is not performed due to the steam generation. When the spraying angle is 50 degree, the minimum life of the mold is analyzed 200 times. After adjusting the blowing time from 5s to 3s, the minimum lifetime of the mold has been increased almost twice.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1040-1046
• /
• 2006

This paper is aimed to investigate the deformation caused by ununiform contraction of injection molding with highly big differences of thickness by the continuity of various curvature radius. By CAE analysis, the uniform cooling structure and optimum molding conditions are found for Jars made of SAN and PMMA materials and applied to the design of chill. In order toevaluate the molding pressure, resin temperature, molding temperature, cooling conditions, Moldflow program is applied. As results of experiments, the deformation and inferiority phenomena in Jars are analyzed for each factor and proposed the injection molding conditions to minimize the cooling structure and reduce the cycle time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3280-3286
• /
• 2009

In this paper, we designed and manufactured HD Switch Panel parts with micro-etched pattern. By using CAE analysis, we could predict weld-line positions and the amount of shrinkage during injection molding process. We measured the temperature distribution of the mold surface so that we could optimize the processing conditions such as mold temperature. In order to increase the transcription of micro-etched pattern, we applied the E-Mold technology and evaluated the effect of mold temperature on the surface quality. We concluded that the etched pattern was improved(more than 2.5$\to$1.5~1.7) through the measurement of surface gloss and the observation of both SEM and SPM images.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.533-536
• /
• 2011

기어는 중요한 핵심 기계요소 중 하나로서 기계적 물성이 강화된 엔지니어링 플라스틱의 개발과 제품의 성능 향상 및 소형화, 경량화, 저소음화 등의 소비자 요구를 만족시키기 위한 노력에 편승하여 정밀도가 높은 플라스틱 기어에 대한 생산 요구가 증대되고 있는 실정이다. 본 논문에서는 시력 측정 장치인 자동굴절검사기용 디스크 기어에 대하여 변형을 최소화하기 위한 성형조건 최적화를 수행하였다. 사출 공정의 주요 공정변수를 사출온도, 충진시간과 보압압력, 금형온도로 정하고 다구치 방법에 의해 성형 해석으로 예측된 변형량을 분석한 결과 사출온도와 보압압력이 원판형 기어의 Z방향 변형에 가장 큰 영향을 미치는 것을 알 수 있었다.

• Journal of Korea Foundry Society
• /
• v.10 no.3
• /
• pp.247-253
• /
• 1990

주철의 중력금형주조에서 반복작업에 따른 응고과정의 변화를 3차원의 수치해석적 방법에 의하여 컴퓨터해석을 하였다. 수치해석적 방법으로는 차분법을 채택하였다. 반복작업과정에 따라 변화되어지는 주물의 응고시간과 미세조직, 기계적성질과의 관계가 조사 되어졌다. 컴퓨터에 의해 계산된 각싸이클의 냉각속도로 부터 주물의 공정셀의 수, 경도, 인장강도등의 변화를 예측하였으며 또한 반복싸이클에 따른 금형 및 주물의 온도분포와 최종응고부위등을 예측하였고 이들은 실제주조시험에서 얻어진 결과와 비교적 잘일치하였다. 중력금형주조에서 회주철의 응고시간, 공정셀, 기계적성질 및 응고속도에 미치는 냉각수의 영향이 또한 컴퓨터해석에 의하여 잘예측되었으며 컴퓨터해석에 의한 냉각수 라인의 적절한 설계에 의하여 주물의 미세조직 및 기계적성질과 결함발생 가능위치를 효과적으로 제어할수 있음을 확인하였다.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.121-128
• /
• 2016

In injection molding process, the appearance quality issue occurs in most injection molded article. One of thermal designs for the mold was performed by increasing the cavity wall temperature with being as uniform as possible in any position. On the basis of the practical evaluation, the cavity wall temperature and finishing machined cavity surface under the optimum processing conditions are the most significant factors to avoid the appearance issue on the plastic part for a good cosmetic quality. Also, the wrong choice of gate type and location can have a considerable effect on the quality of a molded part and it's so important to keep the correct runner balance from each cavity. We've proposed the education training model of the practical tool technology course for the field oriented education to improve practical tool technology ability and optimized tooling design for injection molding quality which can be performed at the workplace substantially.