• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.140-141
• /
• 2014

차세대 전극 재료의 개발은 리튬 전지, 슈퍼 축전지, 전력 공급을 포함하는 에너지 저장 매체의 연구에 중심이 되는 요소이다. 이 가운데 금속황화물은 독특하고 우수한 특성 때문에 차세대 전극 재료로서 상당히 주목을 받고 있는 재료이다. 하지만 실제 응용 측면에 있어서 충 방전 관련된 속도와 안정성의 한계가 가장 큰 장애 요소이다. 이러한 한계를 극복하고자 나노구조화에 대한 연구가 집중적으로 진행되고 있다. 본 논문에서는 금속황화물의 에너지 저장 매체로서의 연구 내용을 기술하였다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.127-133
• /
• 2001

It can be known that from leachate generated in the initial stage of landfill there are a lot of undecomposed orgainc materials, its sulfur component reduces to sulfide ion by sulfur reducing microorgarnisms as an anaerobic digestion proceeds, the sulfide ion makes the leachate discolor to black by forming metal sulfide sol, on condition that much more equivalent of sulfide ion than that of metal ion is present, and the metal sulfide sol can be generated to the precipitates by forming black-colored particulates. Therefore, we can confirm the important possibility for the economic and efficient treatment of leachate that it can be passivated, provided that much more equivalent of sulfide ion is present in the reaction of sulfide ion and metal ion.

• Journal of Environmental Health Sciences
• /
• v.14 no.1
• /
• pp.1-9
• /
• 1988

석탄유도가스에 포함된 황화수소를 제거시킬 흡착제를 개발하기 위하여 알칼리 토금속, 천이원소 및 아연의 이온반경보다 이온반경이 작은 금속산화물을 산화아연에 첨가시켜 다공성 흡착제를 제조하였다. 600$\circ$C에서 이들 첨가시료를 2.09vol.% 황화수소와 질소가스 혼합기체로 반응시켜 초기속도를 측정하고, 같은 온도에서 사용된 흡착제를 공기로 재생시켰다. 사용된 금속산화물 첨가 흡착제중에서 CaO, TiO$_2$, $Fe_2O_3$, CuO, $Ga_2O_3$ 및 Si$_2$O가 ZnO 흡착제의 초기속도를 증가시켜 첨가제로 사용할 수 있음을 보였다.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1078-1091
• /
• 1994

Thermodynamic calculations have been made from existing literature data to show that it is reasonable to expect to recover metal chlorides from the chlorination of metal sulfides with chlorine gas. The reactions between 12 metal sulfides, such as, $Ag_2S$, $As_2S_3$, CdS, CuS, $Cu_2S$, FeS, HgS, $MoS_2$, $Ni_3S_2$, PbS, $Sb_2S_3$ and chlorine gas were investigated by means of thermogravimetric method. The theorical calculation and the experimental investigation showed that chlorination of sulfide is a better alternative process for the extraction metallurgical process of sulfide ores.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.1
• /
• pp.138-143
• /
• 2020

Metal sulfides are good candidates for cathode materials. Especially, iron sulfides and nickel sulfides have been demonstrated to be potential electrode materials among metal sulfides due to nontoxicity and high theoretical specific capacities. Electrochemical properties (capacity, cycle life, stability etc.) of Li/iron sulfides or nickel sulfides cell were improved by methode such as coating, doping of material, and nanoization of materials etc.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.344-347
• /
• 2006

탄화수소 연료(LNG, LPG)를 개질하여 수소를 제조하는 연료 처리 공정 중, 탈황 기술은 촉매의 활성저하 및 전극의 피독을 방지하기 위한 필수 기술이다. 본 연구에서는 도시가스 및 액화석유 가스용 부취제로 사용되는 유기 황화합물(,DMS, THT, TBM)을 제거하기 위한 탈황제로서 Cu/ZnO계 흡착제를 개발하였다. 공침법을 이용하여 흡착제를 제조하여 각 부취제별로 상온 및 고온에서의 흡착탈황 성능을 조사하였으며 또한, 이의 특성분석을 행하였다. $Cu/ZnO/Al_2O_3$ 탈황제는 메탄으로부터 고온에서 TH, DMS, TBM+THT 등의 황화합물들을 매우 효과적으로 제거할 수 있었다. 특히, TBM+THT의 혼합가스에서 TBM에 대해 선택적인 흡착을 보였다. THT 흡착에서 흡착온도가 $300^{\circ}C$ 이상에서는, 흡착과정 동안 황의 상호작용으로 인해 금속황화물이 생성되었다.

• Journal of Environmental Health Sciences
• /
• v.20 no.1
• /
• pp.62-67
• /
• 1994

Introduction : Recently, water and environmental pollution becomes serious social problem and high technology makes this pollution accelerate. Hydrogen sulfide, the main subject of our research, is one of the most dangerous air pollutant like SO$_x$ and NO$_x$. The major contaminant in coal gasification is H$_2$S, which is very toxic, hazardous and extremely corrosive. Therefore, control of hydrogen sulfide to a safe level is essential. Although commercial desulfurization process called liquid scrubbing is effective for removal of H$_2$S, it has drawbacks, the loss of sensible heat of the gas and costly wastewater treatment. Many investigations are carried out about high-temperature removal ol H$_2$S in hot coal-derived gas using metal oxide or mixed metal qxide sorbents. It was reported that ZnO was very effective sorbent for H2S removal, but it has big flaw to vaporize elemental zinc above 600\ulcorner \ulcorner As alternative, metal oxides such as CaO, $Fe_2O_3$, TiO$_2$ and CuO were added to ZnO. Especially, different results are reported for $Fe_2O_3$ additive. Tamhankar et al. reported SiO$_2$ with 45 wt% $Fe_2O_3$ sorbent is favorable for removal of H$_2$S and regeneration.

• Clean Technology
• /
• v.21 no.2
• /
• pp.108-116
• /
• 2015

Hydrogen sulfide and ammonia are one of the common malodorous compounds that can be found in emissions from many sewages treatment plants and industrial plants. Therefore, removing these harmful gases from emissions is of significance in both life and industry because they can cause health problems to human and detrimental effects on the catalysts. In this work, pyrolytic carbon blacks from waste tires were used to develop adsorbent with good adsorption capacity for removal of hydrogen and ammonia. Pellet-type adsorbents were prepared by a mixture of carbon black, metal oxide and sodium hydroxide or hydrochloric acid, and their adsorption capacities were estimated by using breakthrough curve of a continuous fixed bed adsorption column at ambient condition. The adsorbent manufactured with a mixture of carbon black, iron oxide(III) and sodium hydroxide showed the maximum working capacity of hydrogen sulfide. For ammonia, maximum working capacity was obtained by the adsorbent manufactured with a mixture of carbon black, copper oxide(II) and hydrochloric acid.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.7
• /
• pp.469-475
• /
• 2014

The study investigated the physicochemical characteristics and the ecological risk of the Northport sediment in B city and the releasing properties of heavy metals into seawater during the resuspension also studied. The major components of the sediment are fine silt and clay which contains high organic matter and AVS (Acid volatile sulfide) and the ecological risk of the heavy metals in sediment also very high. The release rate of heavy metals into seawater was in order of Pb>>Cu>Cr>>Zn>Cd during the resuspension in a batch experiment, and the heavy metal release mainly attributed to the oxidation of metal sulfides. Heavy metals which came from easily oxidisable metal sulfides rapidly contaminated seawater within about 1.0 h of the sediment resuspension. The sulfide oxidation during the resuspension increased the residual fraction of heavy metals in the sediment, decreased the organic bound fraction, and changed the other fractions of heavy metals in the sediment. The release of heavy metals from the sediment during resuspension was affected by the resuspension time, the oxidation rate of metal sulfides and resuspended concentration of the sediment particle.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.45-52
• /
• 2019

$TiO_2$ as a raw material for producing titanium can be produced by carbon reduction of natural ilmenite ores over 1823 K and acid leaching of the obtained titanium-rich slag. However, the conventional process can cause very high energy consumption and a large amount of leaching residues. In the present study, we proposed the sulfurization of $FeTiO_3$ with $Na_2SO_4$ at temperatures below 1573 K, which can separate Fe in $FeTiO_3$ as the FeS based sulfide phase and Ti as the $TiO_2-Na_2O$ based oxide phase. This study is a fundamental study for sulfurization of $FeTiO_3$ to investigate the influence of reducing atmosphere, reaction temperature and the sulfur/Fe ratio on the separability and distribution behaviors of of Fe, Ti, and Na between the oxide phase and the sulfurized phase. At 1573 K and carbon saturation condition, the Fe can be separated from $FeTiO_3$ as Fe-C-S metal and a part of FeS, and the concentration of Fe in oxide decreased to 4 mass% after sulfurization.