• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.92.2-92.2
• /
• 2018

빠르고 정확한 글루코오스 농도 측정은 의료, 식품, 환경 등 다양한 산업에서 매우 중요하다. 글루코오스 산화효소를 기반으로 하는 현재 글루코오스 센서는 높은 감도와 선택성을 갖지만 온도변화나 다른 화학물 등 환경에 취약하다는 단점이 있다. 따라서 최근 비효소식 글루코오스 센서에 대한 연구가 활발히 진행되고 있다. 금속-유기 구조체(MOFs)는 금속이온과 유기물 리간드로 구성된 결정성 다공체로, 큰 기공 크기와 비표면적, 안정성 등을 특징으로 갖는다. 대부분의 MOFs는 전기전도도가 낮지만 금속이온의 산화/환원, 리간드의 화학적 개질을 통해 전기화학분야에서도 다양하게 연구되고 있다. 본 연구에서는 글루코오스 농도 측정을 위한 전극촉매로 다양한 금속이온과 리간드로 이루어진 MOFs를 합성했다. 표면분석을 통해 MOFs의 전기화학적 처리 전후의 구조와 성질 변화를 관찰했고 전기화학적 분석을 통해 금속이온과 리간드의 종류가 감도, 선택성 등 글루코오스 검지 성능에 주는 영향을 분석했다. 그 결과 Ni, Co 기반의 MOFs가 글루코오스에 대해 높은 감도를 보였으며 이를 통해 MOFs의 글루코오스 센서로의 응용 가능성을 확인했다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.73.2-77
• /
• 2000

A possibility of the implementation of a quartz crystal sensor to the detennination of chemical oxygen demand is examined by checking the electrochemical behavior of the sensor in a glucose solution. Since the surface of a quartz crystal has to be oxidized, a relatively active metal is coated on the surface of a usual 9 MHz AT-cut crystal. The electrochemical behavior is investigated by measuring the changes of current, resonant frequency and resonant resistance while a constant potential is applied. The crystal is installed in a specially designed container, and a QUartz crystal analyzer is utilized to measure the frequency and resistance simultaneously. The variations of the measurements are examined at different concentrations of glucose solution and the effect of the concentration is analyzed to find a proper relation between the concentration and the measurements. It is fOlmd that a linear relation between the concentration of less than 900 Dpm and the peak current when a constant potential of -180 m V vs. Ag/ AgCI reference is applied.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.379-381
• /
• 2001

굴절율 측정에 의하여 당 성분을 정량하는 방법을 이용한 장치로, 글루코오스의 환원성에 기초하여 산화ㆍ환원 반응을 이용한 적정법이나 흡광도 측정법과 비교하여 시약이 필요없고 시간이 단축되는 장점이 있다. 그리고, 보통의 굴절율 측정기(예로 Abbe refractometer)가 당 농도 0.5％일 때의 굴절율 값 단위로 측정되는 한계를 극복하여 본 당 모니터링 장치는 바탕 물질과의 굴절율 차이를 증폭한 값으로 data(differential refractive index)를 얻을수 있으므로 글루코오스 농도 0.01% 단위까지 정량할 수 있어서 0.1% 이하의 저농도도 측정 가능하며 그 이상의 농도 범위에서도 측정 오차를 줄일수 있는 장점이 있다. (중략)

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.39-45
• /
• 2005

As a basic research for the development of a non-invasive blood glucose sensor using millimeter waves, we have presented a method for measuring the dielectric properties of high loss dielectrics, based on the reflection method, and investigated the variation of the dielectric properties of glucose-water and glucose -0.9% NaCl solutions in the 10～90 GHz range. In the proposed method, a minimal reflection condition is formed by placing a specially-chosen low-loss plane-parallel plate in front of a high-loss medium under test at a given frequency range. Using the minimal power reflection coefficient and the corresponding frequency at this condition, tile dielectric properties of the medium can be determined. The measured results on pure water have shown the adequacy of the proposed method. The measured results on glucose-water and glucose -0.9% NaCl solutions in the 10～90 GHz range showed that the variations of the dielectric properties of glucose solutions according to the change of their glucose concentration were maximum in the 30～45 GHz range. From these facts we concluded that the variation of about 3 mole/L in the glucose solutions must be distinguished With the measurement accuracies of ±0.1 dB and ±0.01 GHz.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.397-403
• /
• 2002

Urine glucose monitoring system is a self-monitoring system that display the glucose level by non-invasive measurement method. In this paper, We developed a noninvasive urine glucose monitoring system that improved defects of urine glucose measurement with a colorimeter method and invasive blood glucose measurement method. This system consist of bio-chemical sensor for urine glucose measurements, signal detecting part, digital and signal analysis part, display part and power supplying part. The developed bio-chemical sensor for the measurement of urine glucose has good reproducibility, convenience of handing and can be mass-produced with cheap price. To evaluate the performance of the developed system, We performed the evaluation of confidence about the detection of glucose level by a comparison between a standard instrument in measuring glucose level and the developed system using standard glucose solutions mixed with urine. Standard error was 2.85282 from the evaluation of confidence based on regression analysis. Also, In analysis of S.D(standard deviation) and C.V(coefficient of validation) that are important parameters to evaluate system using bio-chemical sensor, S.D was 10% which falls under clinically valid value, 15%, and C.V was under 5%. Consequently from the above results, compared to blood glucose measurement, the system performance is satisfactory.

• Journal of Korean Port Research
• /
• v.14 no.4
• /
• pp.475-479
• /
• 2000

A possibility of the implementation of a quartz crystal sensor to the determination of chemical oxygen demand is examined by checking the electrochemical behavior of the sensor in a glucose solution. Since the surface of a quartz crystal has to be oxidized, a relatively active metal is coated on the surface of a usual 9 MHz AT-cut crystal. The electrochemical behavior is investigated by measuring the changes of current, resonant frequency and resonant resistance while a constant potential is applied. The crystal is installed in a specially designed container, and a quartz crystal analyzer is utilized to measure the frequency and resistance simultaneously. The variations of the measurements are examined at different concentrations of glucose solution, and a proper relation between the concentrations of glucose solution, and a proper relation between the concentration and the measurements is analyzed. As a result, it is found that a linear relation between the concentration of less than 900 ppm and the peak current when a constant potential of -180 mV (SSCE) is applied. The relation can be utilized for the determination of glucose concentration in sea water, and considering a direct relation between gluose concentration and chemical oxygen demand tells a possibility of the measurement of chemical oxygen demand using quartz crystal oscillators.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1474-1475
• /
• 2008

본 논문에서는 nanoporous Pt (Platinum) 전극을 이용한 무효소 혈당센서의 생체 적합성 및 전류응답 특성 향상을 위해 다양한 패키징 방법이 제안되었다. 생체적합성을 갖는 Nafion 멤브레인을 dipping, spin coating, chemical bonding 방법으로 패키징 한 후, 다양한 글루코오스 농도의 혈장, 전혈에서 특성을 분석, 비교하였다. 단백질 등이 포함되지 않은 환경에서 spin coating 방법으로 패키징한 센서의 전류응답 특성은 가장 좋았지만, 혈장 및 전혈에서는 dipping, chemical bonding 방법으로 패키징한 센서의 전류응답 특성에 미치지 못했다. Nafion film을 센서와 chemical bonding한 센서의 혈장에서 sensitivity 는 0.32 ${\mu}A/mM{\cdot}cm^2$ 이었다. 한편, 전혈에서 bare 센서가 급격한 bio-fouling 현상을 보이는 반면 패키징한 센서는 글루코오스 농도에 따라 일정한 전류변화를 보였다. 이는 Nafion을 이용하여 패키징한 무효소 혈당 센서가 생체환경에 적합할 뿐 아니라 생체이식형 및 연속 측정 가능한 시스템에 적용 가능함을 보여준다.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2121-2124
• /
• 2004

전기화학발광(ECL) 시스템은 높은 감도와 넓은 선형동작영역을 가지므로 분석화학에서 넓게 연구 되고 있다. 그러나 포토멀티플러, 광섬유와 플루오르메터로 구성된 ECL 검출 시스템은 크기가 크고, 전력소모가 많으며, 고가인 단점이 있다. 따라서 이러한 단점을 보완하기 위해 p+n 포토다이오드를 이용한 마이크로 ECL시스템을 제작 과산화수소 농도를 50uM${\sim}$10mM 범위에서 측정하였고, 글루코오스는 1mM${\sim}$20mM 농도범위에서 측정하였다. 따라서 마이크로 ECL 시스템이 바이오센서 혹은 바이오 분석기로써의 가능성을 확인 하였다.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.549-557
• /
• 2000

FRIR-ATR spectrometry has been used to monitor the aqueous reactions of compounds without distinct chromophores in ultraviolet and visible regions. For example, hydrolysis reactions of ${\alpha}$-cyclodextrin and ${\gamma}$-cyclodextrin in acidic aqueous solution were studied. FTIR-ATR method has been used for the monitoring of cyclodextrin hydrolysis in 1.0 M. 0.5 M, and 0.1 M HCl solutions, respectively. We also found that the hydrolysis of ${\alpha}$-cyclodextrin produced glucose, but the hydrolysis of ${\gamma}$-cyclodextrin proceeded further to give more fragmented products than glucose.

• Journal of Sensor Science and Technology
• /
• v.17 no.4
• /
• pp.250-255
• /
• 2008

A vanadium pentoxide ($V_2O_5$)-based bolometric infrared (IR) sensor has been designed and fabricated using micro electro mechanical systems (MEMS) technology for glucose detection and its resistive characteristics has been illustrated. The proposed bolometric infrared sensor is composed of the vanadium pentoxide array that shows superior temperature coefficient of resistance (TCR) and standard silicon micromachining compatibility. In order to achieve the best performance, deposited $V_2O_5$ thin film is optimized by adequate rapid thermal annealing (RTA) process. Annealed vanadium oxide thin film has demonstrated a linear characteristic and relatively high TCR value (${-4}%/^{\circ}C$). The resistance of vanadium oxide is changed by IR intensity based on glucose concentration.