• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.647-649
• /
• 1998

본 논문에서는 다각 근사화 방법과 래스터 기반 연산 알고리즘을 이용하여 평면 지도상에 나타난 등고선을 3차원 가시화(Visualization)하여 보여준다. 다각 근사화 방법은 입력한 등고선에 대한 특징을 반영할 수 있는 최소한의 선형구분 오차 임계값을 이용하여 등고선에 근사화 시킨 것으로 저장 데이터의 양을 축소할 수 있다. 래스터 기반 알고리즘은 이웃한 두 개의 등고선 내부점의 높이 값을 그 점에서 두 등고선까지의 최단거리 및 등고선의 높이값을 변수로 하는 선형보간식으로 정의하고, 거리변환 연산을 도입하여 계산하는 알고리즘으로 구현이 용이하며, 간단한 계산만을 수행하기 때문에 처리 방법이 간단하다는 장점을 갖는다. 본 논문에서는 래스터 방법만을 이용한 복원보다 자료의 양이 감소함을 보였고, 전체 처리과정의 간단함과, 3차원 가시화된 등고선을 그래프 좌표상의 X, Y, Z축으로 원하는 각도만큼씩 회전시키며 관찰 할 수 있도록 하였다. 본 연구를 통해 지형의 특징을 원형 등고선과 유사하게 유지하면서, 데이터 양을 축소하고 계산식을 간략화된 효과적인 지형정보 시각화를 보여주었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.9
• /
• pp.785-795
• /
• 1990

For the far field radiation pattern of a microstrip array antenna which is conformed to a cylindrical surface and forms an arc array, an approximate analysis method using FOURIER TRANSFORM is presented. In this method, the conformal array antenna is projected on the effective aperture plane and assumed to be an aperiodic array with nonlinear phase tilt. The effective aperture plane includes four end-points of each arc on the cylindrical surface. When the effective aperture ratio which is normalized to the planar type is from 1.0 to 0.9, it is confirmed that this approximate method is valid. To the array on the effective aperture plane, it is assumed that the phase tilt is due to the distance between aperture plne and curvature surface. Specially, when the radius of arc is more than 5 times to its length, the FOURIER TRANSFORM METHOD could be used with only varying scale factors. The results of calculating by approximate method are good agreement with the results of COORDINATE TRANSFORM METHOD and experimentally measured value in the range of -40dB. And, the difference of half power angle is less than 5 degrees when the effective aperture ratio moer than 0.9.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.19-25
• /
• 1998

발란싱 축소모델의 상태변수는 플랜트의 상태변수에 대한 정보를 주지 못한다. 발란싱 축소모델을 좌표 변환하여 얻은 상태유지 축소모델은 그 축소오차가 발란싱 축소모델의 축소오차와 같음을 증명하였다. 상태축소오차를 정의하였고, 이 오차를 구하는 방법을 제시하였는데, 이 오차는 축소모델의 차수가 정해지면 불변임을 증명하였다. 상태유지 축소모델의 상태변수는 그 상태축소오차가 작은 경우 원 시스템의 상태변수를 근사하는 장점이 있다. 상태유지 축소모델을 저차원제어기 설계에 적용하여 저차원 상태변수가 플랜트의 상태변수를 근사하는 예를 보여주었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.6
• /
• pp.55-64
• /
• 2001

Industrial machines are sometimes exposed to the danger of earthquake. In the design of a mechanical system, this factor should be accounted for from the viewpoint of reliability to analyze a complex nonlinear structure system under random excitation is proposed. First, the actual random excitation, such as earthquake, is approximated to the corresponding Gaussian process for the statistical analysis. The modal equations of overall system are expanded sequentially. Then, the perturbed equations are synthesized into the overall system and solved in probabilistic way. Several statistical properties of a random process that are of interest in random vibration are evaluated in each substructure. Comparing with the results of the numerical simulation proved the efficiency of the proposed method.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.4 s.35
• /
• pp.10-18
• /
• 1999

본 논문에서는 대형구조물의 해석에 있어서 부분구조합성법과 섭동법을 이용하여 복잡한 비선형시스템의 해석방법을 제안하였다. 해석방법은 전체시스템을 먼저 몇 개의 분계로 분할한다. 각 분계의 운동방정식에 비선형항이 존재하여도 전체시스템의 지배적 진동모드는 선형모드라는 가정하에 이 시스템의 각 분계를 모드좌표로 변환한다. 이때, 비선형항은 근사적으로 변환한다. 그리고 섭동법을 이용하여 각 분계의 모드좌표방정식은 섭동좌수별로 정식화되어 순차적으로 구해진다. 비선형의 감도는 비선형계수로 정의되고, 그에 상응하는 강성에 의해 구해진다. 제안된 해석방법으로 비선형회전체, 비선형 베어링-페데스탈로 구성된 대형시계구조물의 진동을 해석하였다. 해석방법의 유효성을 평가하기 위해 응답의 정도와 계산소요시간을 유한요소법의 결과와 비교 분석하였다.

• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2018

In the two-dimensional (2D) modeling of electrical method, the potential in the space domain is reconstructed with the calculated potentials in the wavenumber domain using inverse Fourier transform. The inverse Fourier integral is numerically evaluated using the transformed potential at different wavenumbers. In order to improve the precision of the integration, either the logarithmic or exponential approximation has been used depending on the size of wavenumber. Two numerical methods have been generally used to evaluate the integral; interval integration and Gaussian quadrature. However, both methods do not consider the distance from the current source. Thus the resulting potential in the space domain shows some error. Especially when the distance from the current source is very small or large, the error increases abruptly and the evaluated potential becomes extremely unstable. In this study, we developed a new method to calculate the integral accurately by introducing the distance from the current source to the rescaled Gauss abscissa and weight. The numerical tests for homogeneous half-space model show that the developed method can yield the error level lower than 0.4 percent over the various distances from the current source.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.41-48
• /
• 2003

The most great GPS is working on CNS(Car navigation System) and Personal terminal, but ocean has not been. First studied GPS is sailing to ship but We have been connivance that The ship is not need detail navigation. Lately, harbor facilities and transportation service in harbors are complication. We have need accurate ship navigation system. In this paper, author developed algorithms of ellipsoid conversion between WGS84 and BESSEL and develope algorithms of map projection between ellipsoid coordinate system, and plane cartesian system. Author used 3-parameter in covering ellipsoids and used TM and UTM projection in converting between ellipsoid and plane cartesian coordinate. And author analyzed errors through static surveying and dynamic surveying of GPS for proving accuracy of GPS sensor, Furthermore author analyzed deflection error of received position. Finally author developed real time ship navigation system using cheep GPS sensor.

• Journal of The Korean Association of Information Education
• /
• v.3 no.1
• /
• pp.134-142
• /
• 1999

The demand for recognizing the color as well as the object shape is increasing to use the detailed information, because-the expense of color input/output devices become cheap. The research on the color correction should be researched for the exact color presentation and color reproduction of color input/output systems. In this paper, we researched on the color correction of color scanner. The characterization of color scanner is a two step process of gray-balancing and color transformation. The decoupling of the gray-balancing from the color transformation enables the portability of the scanner characterization. We used the least square methods for the line fitting and the Neural Network for the storage space and computation speed. The output of Neural Network is similar to the target value in three-dimensional tristimulus space. The proposed color correction method can be used for all scanners of a manufacturer's model because of the portability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.125-132
• /
• 1987

The bundle adjustment used in photogrammetric data reduction is based on the collinearity condition. Photogrammetry has been used in many non-topographic applications. Due to the necessities of having fiducial marks and knowing initial approximations for interior and exterior orientation elements in bundle adjustment, it cannot be applied when non-metric cameras are used. Marzan and Karara develop the DLT(Direct Linear Transformation) program which directly transforms comparator coordinates into object space coordinates without approximate values. In this paper, several modifications of original DLT program have been made for accuracy improvement in close-range photogrammetry using non-metric cameras. In modified program, gross error detection method and computation of exterior orientation elements are incorporated, and more iterations are introdued.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.2
• /
• pp.20-27
• /
• 1998

This paper describes color clustering method based on color difference in the uniform Munsell color space obtained from hue, saturation, and value. The proposed method operates in the uniform HSV color space which is approximated using ${L^*}{a^*}{b^*}$ coordinate system based on the RGB inputs. A clustering and color difference evaluation are proposed by thresholding NBS unit which is likely to Balinkin color difference equation. Region segmentation and isolation process are carried out ISO DATA algorithm which is a self iterative clustering technique. Through the clustering of 2 input images according to the threshold value, satisfactory results are obtained. So, in conclusion, it is possible to extract result of better region segmentation using human color perception of the objects.