• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.159-170
• /
• 1998

Man-made noise in PCS frequency range are measured using the three axis antennal with common port and the measured data are statistically treated for modeling. The can optimal parameters of the measured APD curves can be calculated fast by using the Composite Approximation Algorithm. The calculated APD parameters can reduce the EM-environments Data Base memory and also be applied to determine the output and sensitivity margin of the transmitter and the receiver.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1996-1998
• /
• 2001

This paper presents the closed-loop composite control for weakly coupled bilinear systems with a quadratic performance criterion. The Riccati equation for weakly coupled bilinear system is decomposed into three reduced Riccati equations by the weak coupling theory, and we obtain optimal solutions of each reduced Riccati equation using successive Galerkin approximation(SGA). We design the composite control law that consists of optimal solutions of each reduced Riccati equation. The proposed algorithm reduces the disadvantages of SGA method.

• Journal of the Korean Ceramic Society
• /
• v.31 no.4
• /
• pp.457-463
• /
• 1994

The growth condition of highly oriented textured diamond film on a (100) Si substrate was investigated as a function of texture orientation. The growth process consisted of biased enhanced nucleation (BEN) and texture growth. The substrate was under the plasma of 6% CH4-94% H2 with negative bias of 200V during the BEN which grounded during the texture growth. The texture orintation changed from <100> to <110> by increasing substrate temperature. The nearly perfect match between textured diamond grains and the Si substrate could be obtained under the condition of <100> texture. The degree of tilt mismatch increased with the increase of deviation of texture orientation from <100>. The degree of twist mismatch appeared to increase abruptly beyond the critical deviation of texture orientation from <100> because the nuclei having the same orientation as the substrate were no more preferred grains for texture formation.

• Water for future
• /
• v.19 no.2
• /
• pp.157-166
• /
• 1986

The objective of this study was to determine the best representative synthetic unit hydrograph that is applicable to ungaged small watershed. A typical unit hydrograph was established with the actual data from a small watershed. Four currently well-known methods for analyzing ungaged small watershed, including Snyder's, Clark's S.C.S. and Nash methods, were evaluated with the data from the same small watershed. The following observations were noted from the analysis of four methods. The Snyder's method yielded the similar peak discharge value as the typical unit hydrograph. With co-ordinates of three discharge values, i.e. 25%, 50% and 75% of peak discharge, were not adequate for deriving a typical unit hydrograph in ungaged small watershed. With Clark's method there shall be some way of obtaining the exact base length of time area diagram and isochrone of each reach of the stream. With Nash method peak discharge and base flow time are affected by the storage constant and gamma function argument; therefore, for deriving a more reliable and workable unit hydrograph one needs to select for the better estimation of storage constant and gamma function argument. In S.C.S. method peak discharge is directly related to the watershed area and inversely related to the time of peak diacharge. Therefore area with faster peak discharge yielded the higer peak discharge value. Although the peak discharge value obtained frome the S.C.S. method higher than the value obtained from the unit hydrograph developed from the actual data, this method contains a number of advantageous factors. The peak discharge value and the time of peak discharge can be claculated easity from the morphological characteristics of the watershed, and in S.C.S method co-ordinates of the unit hydrograph can be calculated easily from that of the dimensionless unit hydrograph. When the four currently used methods were evaluated with a typical unit hydrograph obtained from the actual data, the S.C.S method was show to be the best method in deriving a synthetic unit hydrograph for ungaged small watershed.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.271-276
• /
• 2014

In a speech coding system using excitation source of voiced and unvoiced, it would be involved a distortion of speech quality in case coexist with a voiced and unvoiced consonants in a frame. In this paper, I propose a method of 8kbps Multi-Pulse Speech Coding(FBD-MPC: Frequency Band Division MPC) by using TSIUVC(Transition Segment Including Unvoiced Consonant) searching, extraction and approximation-synthesis method in a frequency domain. I evaluate the 8kbps MPC and FBD-MPC. As a result, SNRseg of FBD-MPC was improved 0.5dB for female voice and 0.2dB for male voice respectively. Compared to the MPC, SNRseg of FBD-MPC has been improved that I was able to control the distortion of the speech waveform finally. And so, I expect to be able to this method for cellular phone and smart phone using excitation source of low bit rate.

• Journal of Korea Game Society
• /
• v.9 no.5
• /
• pp.137-144
• /
• 2009

This paper predicts 6 facial regions that may have sharply different scattering properties, rendering the face more realistically based on their diffusion profiles. The scattering properties are acquired in the form of high dynamic range by photographing the pattern formed around an unit ray incident on facial skin. The acquired data are fitted to a 'linear combination of Gaussian functions', which well approximates the original diffusion profile of skin and has good characteristics as the filter. During the process, to prevent its solutions from converging into local minima, we take advantage of the genetic algorithm to set up the initial value. Each Gaussian term is applied to the irradiance map as a filter, expressing subsurface scattering effect. In this paper, to efficiently handle the maximum 12 Gaussian filterings, we make use of the parallel capacity of CUDA.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.3
• /
• pp.55-61
• /
• 2015

In this paper, we introduce a method to synthesize realistic make-up effects on input images efficiently. In particular, we focus on shading on the make-up effects due to the lighting and face curvature. By doing this, we can synthesize a wider range of effects realistically than the previous methods. To do this, the information about lighting information together with the normal vectors on all pixels over the face region in the input image. Since the previous methods that compute lighting information and normal vectors require relatively heavy computation cost, we introduce an approach to approximate lighting information using cascade pose regression process and normal vectors by transforming, rendering, and warping a standard 3D face model. The proposed method consumes much less computation time than the previous methods. In our experiment, we show the proposed approximation technique can produce naturally looking virtual make-up effects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1087-1099
• /
• 1998

In the content-based image coding, where each object in the scene is encoded independently, the shape, texture and motion information are very important factors. Though the contours representing the shape of an object occupy a great amount of data in proportion to the whole information, they strongly affect the subjective image quaility. Therefore, the distortion of contour coding has to be minimized as much as possible. In this paper, we propose a new method for the contour coding in which the contours are approximated to polygon and the eorror signal occurring from polygonal approximation are transformed with new basis functions. Considering the facts that confour segments occurring from polygonal approximation are smooth curves and error signals have two zero-ending points, we design new basis functions based on the Legendre polynomial and then transform the error signals with them. When applied to synthetic images such as circles, ellipses and etc., the proposed method provides, in overall, outstanding results in respect to the transform coding gain compared with DCT and DST. And in the case when applied to natural images, the proposed method gives better image quality over DCT and comparable results with DST.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.3 no.2
• /
• pp.10-17
• /
• 1966

A method by which solutions of the differential equations of any other distributed circuits can be obtained is described when the solution of the differential equation of an R-C distributed amplifier is known. A graphical method of transforming any R-C ditributed circuit into an equivalent circuit which has a constant R(x)$cdot$C(x) was also obtained. The theoretical verification of this method is possible. For simplicity, any R-C distributed circuit can be transformed into an equivalent circuit which is a distributed circuit of either constant R(x) or C(x). Using this equivalent circuit and considering a lumped circuit, an approximate analysis and synthesis can be made simply.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.98-108
• /
• 1996

In the reliability analysis of general structures, the limit state equations are implicit and cannot be described in closed form. Thus, sampling methods such as the Crude Monte-Carlo simulation, and probabilistic FEM are often used, but these methods are not so effective in view of computational cost, because a number of structural analysis are required and the derivatives must be calculated for probabilistic FEM. Alternatively the response surface approach, which approximates the limit state surface by using several results of structural analysis in the region adjacent to MPFP, could be applied effectively. In this paper, the central composite design, Bucher-Bourgund method and the approximation method using artificial neural network are studied for the calculation of probability of failure by the response surface method. Through the example comparisons, it is found that Bucher-Bourgund method is very effective and Neural network method for the reliability analysis is comparable with other methods. Specially, the central composite design method is found to be rational and useful in terms of mathematical consistency and accuracy.