• Journal of Korean Society of Steel Construction
• /
• v.21 no.5
• /
• pp.483-492
• /
• 2009

In this study, nonlinear analysis of steel plane frame was performed using the refined plastic hinge method of advanced analysis techniques. In deterioration of stiffness in plastic zone, influences by flexural bending, residual stress, geometrical non-linearity, and semi-rigid connection are considered. And also, further reduced tangent modulus was used for geometrical non-linearity, top and seat angle were chosen for semi-rigid connection. Furthermore, 3 parameter power model was used for moment-rotation behaviour of beam to column connection. The loading conditions are combined with axial and lateral force and the inverse triangle distribution of lateral and eight type of analytical models were used in analysis. The results of analyses were compared with semi-rigid and rigid connection on behaviour of numerical analysis models. And also, the behaviors of frame with changes of semi-rigidity were analyzed by using the results obtained from MIIDAS-GENw.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.6
• /
• pp.609-619
• /
• 2001

It is almost impossible to evaluate the ultimate strength theoretically, because the behavior of Gusset-Tube connection stiffened with rib-plate is considerably complicate. Therefore in this study a finite element model of gusset-tube connection stiffened with rib-plate was established. The validity of finite element analysis was examined through comparing with previous experimental result and the behavior and strength of the connection was examined. From the parametric study considering lateral force ratio, eccentricity, gusset length based on finite element model, the stiffened effect was estimated and stiffening method was proposed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.5
• /
• pp.169-178
• /
• 2008

Compressive flanges of steel box girder is designed based on the ultimate strength behavior of sub-panel which is enclosed with longitudinal stiffeners and transverse stiffeners on appropriate safety factor. However, it is rational that the ultimate strength is calculated considering the various factors such as number and stiffness of longitudinal stiffener, spacing of transverse stiffener, initial deformation and residual stress distribution. In this study, an analysis program based on Folded Plate theory is developed considering the geometric effects and the material nonlinearity. The analysis program is applicated to the steel box girder bridges which is really constructed in domestic.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.147-147
• /
• 2015

전 세계적으로 이상기후로 인한 극한가뭄 및 이상홍수 등의 피해 발생이 확인되고 있으며 그 발생빈도 또한 급격히 증가하고 있다. 그러나 기존의 빈도해석은 시간의 변화에 따라 자료의 통계적 특성이 변하지 않는다는 정상성(stationarity)을 기본 가정으로 수행되기 때문에 극한 사상에 경향성이 있는 경우에 적용하기엔 한계가 있다. 비정상성 빈도해석을 위해 개발된 비정상성 확률 분포 모형들은 대부분 매개변수에 시간항을 포함하는 형태로 정의된다. 이중에서도 우리나라에 널리 사용되고 있는 Gumbel 모형에 대해 살펴보면, 비정상성 Gumbel 모형의 위치 및 규모 매개변수는 시간에 대해 선형(linear) 및 지수(exponential) 함수의 관계를 보이는 형태로 가정한다. 규모 매개변수의 지수함수의 형태는 음(-)의 값이 추정되는 것을 방지하기 위해 제안되어 널리 사용되고 있으나 이로 인해 확률수문량이 과다산정되는 문제가 발생하기도 한다. 본 연구에서는 이러한 문제를 해결하기 위해 비정상성 Gumbel 모형을 대상으로 규모 매개변수의 다양한 형태를 비교하고자 한다. 이를 위해 비정상성 Gumbel 모형 규모 매개변수를 지수함수, 선형, 로그, 로지스틱 형태로 가정하여 비교하였다. 각 모형의 매개변수의 추정은 최우도법을 적용하였으며, 규모 매개변수의 형태별 정확도 비교를 위해 모의실험을 수행하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.363-363
• /
• 2020

최근 기후변화에 따른 가뭄과 홍수 등 극한사상 발생빈도가 증가하고 있으며, 환경, 생태, 사회, 경제적 측면에 영향을 미치는 심각한 재해로 인식되어 이로 인한 피해를 줄이기 위하여 다양하고 활발한 연구가 진행되고 있다. 극한 가뭄시에는 최소한의 유량만을 제외하고 사용하는 경우가 많다. 대부분 하천 주변에서는 생공·농업용수를 위하여 지하수를 양수하고 있다. 이에 대한 명확한 기준에 정해져 있지 않아, 무분별한 양수는 하천 생태계를 위협하기도 한다. 본 연구에서는 유역 물순환 해석 플랫폼(Catchment Hydrologic Cycle Assessment Tool, CAT) 모형을 이용하여 조천천 유역에 지하수 변화 등 인위적 물이용량을 고려했을 때의 하천유량 변화를 분석하였다. CAT은 기후변화나 토지이용변화에 따른 유역의 수문환경특성 변동성을 정량적으로 평가하기 위하여 개발된 모형이며, 인위적인 물이용체계 즉, 광역급수, 용수재이용, 지하수 취수, 하천수 취·배수 등을 고려하여 분석이 가능하다. CAT을 통한 인위적 물이용 시나리오를 달리하여 하천유량 변화를 분석한 결과를, 중소하천 가뭄 대책 및 효율적인 의사결정 자료로 활용이 가능할 것으로 판단되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.391-399
• /
• 2006

Plate girders with variable depths have been often used at piers considering not only the economy but also an aesthetic aspect. Tapered plate girders exhibit more complicated behaviors than prismatic girders especially under shear. However, a comprehensive design method for the determination of the shear strength has yet to be developed mainly due to lack of study. In this study, investigated is the buckling and ultimate behaviors of tapered plate girders subjected to shear through finite element analyses. From the analysis results, a simple design formula is suggested for the evaluation of the shear strength of tapered plate girders.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1091-1092
• /
• 2011

영구자석형 발전기는 외부의 여자 전원이 필요 없어서, 비상 전원으로 뿐 아니라, 소형 발전설비에서의 발전기의 여자 전원으로도 사용될 수 있다. 특히, 내삽형 영구자석형 동기발전기는 자석보다 극의 자속밀도를 더 높일 수 있어, 저가, 고성능 발전기 제작이 가능하다. 본 연구에서는 이러한 발전기에 필요한 발전기 해석기술을 개발한다. 정밀 해석을 위한 등가회로를 모델링하고, 이로부터 해석적인 결과를 얻는다. 전기자 저항을 고려한 경우와 고려하지 않은 경우를 비교하여 해석의 타당성을 검증한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.317-324
• /
• 2015

The design of anchorage zone in a post-tensioned member has been started from the evaluation of the ultimate resisting capacity as well as the maximum bursting stress developed, and a lot of design codes including AASHTO and PTI describe their design equations to determine the bearing strength of concrete at the anchorage zone. However, these equations usually give conservative results because their derivation is based on the simple anchorage with a wide bearing plate in the surface without any additional consideration for the load transfer mechanism through transverse ribs on the anchorage. To assess the influence of geometric parameters related to the transverse ribs on the resisting capacity of anchorage block, experiments and analysis are conducted. After verifying the validity of numerical model conducted through correlation studies between experimental and analytical results, parametric studies with changes in the transverse ribs are followed and design recommendations for the anchorage block are suggested from the numerical results obtained.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.3
• /
• pp.11-21
• /
• 2002

The evaluation of displacement ductility is performed by direct method through tracking the inelastic hysteretic behavior of RC bridge columns subject to cyclic loading using a flexibility-based fiber element mode. To reasonably track the inelastic behavior until the RC bridge column reaches its ultimate state, the average stress-average strain relations and joint elements, which agree well with experiments, are modified and applied considering the tension stiffening behavior and discontinuous displacement between the column and its base. In addition the evaluation of displacement ductility is performed by a direct method easily applicable to numerical analysis. Locations for the integration points, values for the post-crushing concrete strength and low-cycle fatigue failure of longitudinal reinforcement that affect the calculation of yielding and ultimate displacements are proposed for the application to flexibility-based fiber element model. Since less than 10% of error occurs during the displacement ductility analysis, the yielding and ultimate displacements evaluated by the applied analysis method and model appear to be valid.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.2
• /
• pp.117-126
• /
• 2010

Experiment on flexural analysis of RC beams strengthened with composite material panel is presented. Recently, the strengthening of reinforced concrete structures using advanced fiber reinforced plastic (FRP) composites, and in particular the behavior of FRP-reinforced concrete structure is topic that has become very popular because of good corrosion resistance and easy for site handling due to their light weight. In this study, an efficient computational analysis using ABAQUS to predict the ultimate moment capacity of reinforced concrete beams strengthened with FRP is presented. Test parameters in this study are the shape of fiber arrangement (LT, DB, DBT) and the number of carbon fiber sheets (2ply, 3ply). When comparing with results of the analytical model, results of the experiments show similar values. Furthermore, reinforced concrete beam with FRP obtains improved effects for ultimate strength.