• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.441-457
• /
• 2009

This study estimated ultimate load by the determination methods based on ultimate load, yield load and settlement using experimental data from static load tests that applied load to driven piles used in sandy grounds at home and overseas until failure appeared markedly. Estimated ultimate load was normalized with actually measured failure load, and was compared among the determination methods according to the characteristics of pile. In addition, I have identified to the determination methods suitable for estimating ultimate load, and reevaluated the safety factor when determining allowable load. From the results of this study were drawn conclusions as follows. Among ultimate loads estimated by the ultimate-load-based determination methods, the value interpreted by Chin's method tended to overestimate actual measurements, and B. Hansen 80% standard and the stability plot method were considered most reliable as their results were closest to actual measurements. According to the results of this study, in calculating the allowable load, if the safety factor to be applied to failing load obtained by the method of determining extreme load is converted to the safety factor applied to the Standards for Structure Foundation Design, a value larger than 3.0 should be applied except the B. Hansen 90% method, and a value larger than 2.0 should be applied in the methods of determining yield load. In addition, if the safety factor to be applied to load obtained by the settlement standard is converted based on safety factor 3.0 for extreme load, a value smaller than 3.0 should be applied to the total settlement standard and the net settlement standard.

• Journal of the Korean Geographical Society
• /
• v.46 no.3
• /
• pp.257-276
• /
• 2011

This study aimed to analyze the changes of extreme temperature indices in order to investigate impacts of urbanization on changes of extreme temperature. It was analyzed 16 indices related to extreme temperature indices to 60 weather stations in South Korea. Extreme temperature indices-related summer mostly increased, and its related to winter decreased. Percentile-based indices were clearly increased more than fixed-based indices as a tropical night. Decreasing trend of extreme temperature indices related to winter had more clear than increasing trend of extreme temperature indices related to summer. It was similar to trend that urban temperature was more clearly increased in winter than summer. Decreasing trend of indices-related daily minimum temperature had more clear than increasing trend of indices-related daily maximum temperature. Also, it was similar to increasing trend of minimum temperature had more clear than maximum temperature.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.113-113
• /
• 2023

기후변화로 인한 온도 상승이 대기 중 수분량을 증가시키면서 극한 강우가 전 세계적으로 빈번하게 발생하고 있으며, 이에 따라 대규모 홍수 피해가 지속적으로 초래되고 있다. 본 연구에서는 이러한 현상에 대응하기 위한 노력으로, 대기 연직 기둥 내 총 수분량을 나타내는 총가강수량(Total Precipitable Water, TPW)과 극한 강우사상(Extreme Precipitation, EP) 간의 연관성이 강우지속기간에 따라 어떻게 변하는지 분석하였다. 관측 및 재해석(reanalysis) 데이터를 활용하여 동시극한지수(Concurrent Extremes Index, CEI, 0~1, 1에 가까울수록 강한 연결)로 두 변수 간의 정량적 연결 강도를 살펴보았다. 분석 결과, CEI의 지속 시간에 따른 변동 경향성은 지역에 따라 상당한 차이를 보였다. 지중해와 중앙아시아와 같은 대부분의 중위도 지역에서는 강우의 지속 기간이 길어질수록 CEI 값이 급격히 감소하였다. 그러나 한반도를 포함한 동아시아 지역은 중위도임에도 불구하고 긴 지속 기간의 강우 사상에서도 높은 수준의 CEI 값을 유지하였다. 이러한 동아시아 지역의 경향성은 열대지역과 매우 유사하게 나타났으며, 이는 동아시아 지역의 극한 강우 증가가 기후변화의 직접적인 영향을 받을 수 있음을 시사한다.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.71-77
• /
• 2008

In this study, CPT-based methodology for estimating the ultimate lateral resistance, $p_u$, is proposed and verified for lateral loaded piles in sandy soil. Preexistent methods estimating the ultimate lateral resistance, $p_u$, and the ultimate lateral capacity, $H_u$, of pile have been based on the vertical effective stress, relative density, and the coefficient of lateral earth pressure. Similarly, cone resistance $q_c$ in pure sandy soil is expressed by those essential factors. As correlation between $p_u$ and $q_c$ are normalized with average effective stress ${\sigma}_m$, estimation methodology for the lateral loaded pile of $p_u$ in sandy soil is proposed. The method is verified by calibration chamber test results in pure sand. The standard derivation of estimated $p_u$ is 0.279, and COV (Coefficient Of Variation) of estimated $p_u$ is 0.272. These results showed that the estimated pus by the method are analogous with the measured $p_us$ in calibration chamber test.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.653-656
• /
• 2010

월성 1호기 격납건물에 대하여 극한내압하중에 대한 확률론적 취약도 평가를 수행하였다. 격납건물 성능의 불확실성은 가동중 검사 결과를 통해 얻어진 재료 물성치 중앙값과 텐던 긴장력 중앙값을 적용하여 고려하였다. 격납건물은 개구부를 고려하여 3차원 유한요소로 모델링하였으며, 확률론적 취약도 평가를 위하여 대규모의 비선형 유한요소 해석 모델을 적용하기에 적합한 효율적인 취약도 평가 기법을 개발하였다. 월성 1호기 격납건물에 대한 취약도 평가 결과, 벽체 중단부가 극한내압발생으로 인한 방사능물질 누출에 가장 취약한 것으로 나타났으며, 중앙값 성능은 약 55psi, 고신뢰도 저파괴 파괴확률값인 HCLPF(High Confidence Low Probability of Failure)는 약 29psi를 나타내었다.

• The Korean Journal of Financial Management
• /
• v.22 no.1
• /
• pp.119-146
• /
• 2005

This study applies extreme value theory to get extreme value-VAR for Korean Stock market and showed the usefulness of the approach. Block maxima model and POT model were used as extreme value models and tested which model was more appropriate through back testing. It was shown that the block maxima model was unstable as the variation of the estimate was very large depending on the confidence level and the magnitude of the estimates depended largely on the block size. This shows that block maxima model was not appropriate for Korean Stock market. On the other hand POT model was relatively stable even though extreme value VAR depended on the selection of the critical value. Back test also showed VAR showed a better result than delta VAR above 97.5% confidence level. POT model performs better the higher the confidence level, which suggests that POT model is useful as a risk management tool especially for VAR estimates with a confidence level higher than 99%. This study picks up the right tail and left tail of the return distribution and estimates the EVT-VAR for each, which reflects the asymmetry of the return distribution of the Korean Stock market.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2212-2218
• /
• 2015

In order to find out the load bearing behavior of sand and clay which sustain three types of shallow footing, finite element analyses were performed. Failure zone of sand which sustain strip footing was affected by relative density of sand whereas, failure zone of clay was not affected by soil strength and it was similar to the failure zone which is considered in theory. Considering the shape of load-settlement curves obtained by numerical analyses, punching shear failure can be seen in loose sand and ultimate bearing load can not be seen in dense sand whereas, yielding point can be seen in clay. Ultimate bearing loads for sand predicted by theory were greater than those obtained by numerical analyses and ultimate bearing loads for clay predicted by theory were similar to those of numerical analyses. Ultimate bearing loads determined by 1 inch settlement criteria were slightly less than those of numerical analyses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4205-4209
• /
• 2011

Numerical analysis were executed in order to investigate ultimate lateral resistance of roots of vegetation. Ultimate lateral resistances of roots obtained from the assumed values of cohesions were distributed between the values of the two kinds of the existing studies. The ultimate lateral resistance values were more close to those by the bearing capacity solution than those by the cavity expansion theory. Coefficient of bearing capacity determined by the numerical analysis was 33. Yielding displacements obtained from the numerical analysis were 0.08~0.29 times of the diameter of the root and those were overall close to the value of the existing study which was undertaken for the pile diameter of 1 cm.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.319-319
• /
• 2018

최근 전 세계적으로 극한수문사상의 증가로 인한 피해의 규모와 빈도가 잦아지고 있다. 기후변화에 관한 정부 간 협의체(IPCC)5차 보고서에 따르면 우리나라는 모든 시나리오 하에서 평균 강수량이 증가하는 지역으로 분류되었다. 특히 강우와 태풍피해가 잦은 7월에서 9월의 강우량이 급격히 증가하는 것으로 나타나며 이는 현재보다 극한수문사상이 더욱 빈번하게 일어날 것이라 예상할 수 있다. 하지만 기존의 매개변수 추정방법은 이상치 산정기준을 넘어서는 극치를 제외하고 확률강우량을 산정하고 있는 실정이다. 따라서 본 연구에서는 이러한 기존의 매개변수 추정방법 보다 극한값에 강건한 MDPDE(minimum density power divergence estimator)를 이용한 매개변수 추정을 사용하여 우리나라 60개 강우관측소의 과거 강우관측자료에 대한 최적조율모수에 대한 빈도별 확률강우량을 추정하여 기존의 방법으로 산정한 확률강우량과 비교하였다. 이상치로 분류할 수 있는 극한수문사상이 발생한 우리나라 31개소에 대하여 MDPDE의 적용성을 검토한 결과 기존의 매개변수 추정방법에 비해 이상치를 포함한 100년 빈도 확률강우량이 약13.3% 감소하는 것으로 나타났다.

• Communications of Mathematical Education
• /
• v.12
• /
• pp.303-315
• /
• 2001

본 논문에서는 고등학교 수학교과 7차 교육과정중 미분 단원의 교수 학습을 위한 프로그램을 Visual Basic 프로그램으로 설계한 과정과 그 기능을 기술하였다. 함수의 미분을 위한 초기의 좌표와 미분할 점의 좌표, 실행회수 등의 데이터를 입력 ${\cdot}$ 실행하여 그 결과(접근과정)를 화면에 도표와 그래프로 나타나게 하였고 미분단원의 ‘학습내용’과 ‘사용설명’의 기능을 추가하였다. 보조계산이나 함수의 입력을 위해 “함수값 계산”, “극한값 계산”, “함수입력판” 등의 창(폼)을 설치하였다. 이 프로그램은 일선 학교 교육 현장에서 수학 교수-학습을 위한 효율적인 시청각 자료로 활용 될 수 있을 것이다.