• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.675-688
• /
• 2022

Produced by steaming mature silkworms, HongJam is a natural functional food with various health-promoting effects. The current standard HongJam production protocol involves freezing and freeze-drying steamed mature silkworms for convenient long-term storage and/or selling it to customers. However, freeze-drying HongJam requires a range of processes and costs, which have contributed to its high resale value. In this study, we found that the cost of manufacturing HongJam powder could be reduced by homogenizing steamed mature silkworms using a high-speed blender and digital homogenizer, followed by spray drying. After the homogenized HongJam solution was digested by directly adding food-graded proteases, food-graded protease-digested homogenized HongJam solution was spray-dried. Food-graded digested protease or non-digested homogenized HongJam solutions could be used to produce food for special medical use for patients with general or specific diseases. This more efficient HongJam processing protocol proposed in this study can facilitate the development of sericulture farms and related industries by reducing the production costs of HongJam and its associated products.

• Journal of Food Hygiene and Safety
• /
• v.31 no.6
• /
• pp.406-413
• /
• 2016

This study was performed to evaluate and establish a sample preparation method for the detection of food-borne pathogens in animal origin foods. Ham, yogurt, and Korean beef inoculated with Escherichia coli O157:H7, Staphylococcus aureus, and Salmonella Typhimurium, were tested for the effects of diluent composition, processing time, and proportion of diluent to sample. The diluents used were peptone water (PW), Saline solution (SS), Butterfield's phosphate buffered dilution water (BPD), and Buffered peptone water (BPW). The processing time periods considered for the samples were 30, 60, 90, 120, and 300 sec, and the proportions of diluent to samples tested were 1:2, 1:4, 1:9, and 1:19. Yogurt and beef showed the highest number of bacteria when treated with BPW (p < 0.05). However, ham showed no significant difference between the treatments with four different diluents. Optimum proportions of diluent to ham, yogurt, and beef were 1:9, 1:2, and 1:4, respectively. The processing time of 120 sec was chosen as optimum, because it showed the best recovery rate in all sample types. In this manner, detection of food-borne bacteria with the selected optimal conditions was indicated by a recovery rate of more than 85%. These data suggest that an appropriate diluent composition and diluent volume should be used depending on the type of sample, which would thereby increase the accuracy of detecting food-borne bacteria in animal origin foods.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.365-373
• /
• 2006

This study was conducted to develop the efficient propagation method of fern Phyllitis scolopendrium using In vitro culture. The influence of the origin of the donor explant sources (rhizome, stipe, three parts of blade) and the homogenization of explants was investigated. Rhizome and stipe explants showed the organogenic capacity among the five explant sources and plant regeneration was promoted by homogenization of culture material. Optimum condition for vigorous and excellent growth of multiple shoots was the half-strength MS medium with 1% sucrose concentration. Generally, addition of $NaH_2PO_4$ to media enhanced shoot multiplication. The highest rate of shoot proliferation was observed on the media containing $5{\mu}M$ NAA. Also, combination of activated charcoal $(0.1{\sim}0.2%)$ and growth regulators to growth medium prevented the formation of multiple bud primordia, 'nodule'-like bud clusters and improved the normal morphogenesis of sporopytes in P. scolopendrium.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.291-298
• /
• 2010

A conventional EGR cooler, which is used in an EGR system of an automobile diesel engine, has a low heat-exchange efficiency. To maximize the heat transfer between the exhaust gas and coolant, dimples are formed on the surface of heat exchange tubes. When designing the dimpled EGR cooler, the net heat transfer areas in the conventional and dimpled tube-type EGR coolers are compared. Structural integrity evaluations are also performed by combining finite element analysis with a homogenization method. Subsequently, the process of manufacturing the dimpled tube, i.e., the formation of dimples, edge bending, center v-notch bending, compression, and plasma welding, is established and carried out. Thus, the dimpled EGR cooler is developed, and its performance is verified.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.83-95
• /
• 2002

Thermal conductivity of ceramic fibrous insulator was analysed and predicted by using the modeling/simulation technique. Ceramic fibrous insulators are widely used as high temperature insulator on account of their lightweight mass and heat resisting properties. Especially it is suitable to protect the high speed aircraft and missiles from severe aero-thermodynamic heating. Thermal conductivity of ceramic fibrous insulator could be determined from the conductive heat transfer and the radiative heat transfer through the insulator. In order to estimate conductive thermal conductivity, homogenization technique was applied, while radiative thermal conductivity was computed by means of random number and radiation probability. Particularly radiation probability can make it possible to estimate the conductivity of fibrous insulator without any experimental constant. The calculated conductivity predicted in the present study have a reasonable accuracy with an average error of 7 percent to experimental data.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.29-44
• /
• 1999

This paper shows the results of model tests on the lateral behavior of single rigid pile, which was constructed by driving, in homogeneous and non-homogeneous (two layered) NakDong River sands. The purpose of the present paper is to investigate the effect of ratio of lower layer thickness to embedded pile length, relative density of sand and pile construction conditions (Driven & Embedded piles) on the characteristics of lateral behavior of single pile. These effects can be quantified only by the results of model tests. As a model result, the lateral behavior depends upon the pile construction condition in loose-density soil more than in high-density soil. If the pile construction depends upon driving construction, the decrease of deflection remarkably increases for both loose homogeneous sand and non-homogeneous soil$(E_{h1}/E_{h2}/=0.18)$ with high thickness of upper layer but the decrease of maximum bending moment shows the opposite result to the decrease of deflection. And, with respect to deflection, it was found that the deflection ratio $(y_{Driven}y_{Embedded})$ of embedded to driven piles has the ranges of 0.65 - 0.88 $(D_r=90%)$0.38 - 0.65 $(D_r=61.8%)$ for each relative density of homogeneous soil and the range of 0.6 - 0.88 for non-homogeneous soil. Also, in this study, the experimental equation for the effects of drop height (DH) and H/L on the ratios of $y_D/y_E\; and MBM_D/MBM_ E$ is suggested from model tests.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.373-379
• /
• 2016

It is known that it is expedient to represent the distribution of the properties of a bone with complex heterogeneity as B-spline volume functions. For B-spline-based representation, the pixel values of CT images are interpolated by B-spline volume functions. However, the CT images of a bone are three-dimensional and very large, and hence a large amount of memory and long computation time for the interpolation are required. In this study, a method for resolving these problems is proposed. In the proposed method, the B-spline volume interpolation problem is simplified by using the uniformity of pixel spacing of the image and the properties of B-spline basis functions. This results in a reduction in computation time and the amount of memory used. The proposed method was implemented and it was verified that the computation time and the amount of memory used were reduced.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.463-474
• /
• 2017

Heterogeneous background fractures of granite and sedimentary rocks in Gyeongju LILW (low-intermediate level radioactive waste) facility area have been characterized quantitatively by analyzing fracture parameters (orientation, intensity, and size). Surface geological survey, electrical resistivity survey, and acoustic televiewer log data were used to characterize the heterogeneity of background fractures. Bootstrap method was applied to represent spatial anisotropy of variably oriented background fractures in the study area. As a result, the fracture intensity was correlated to the inverse distance from the faults weighted by nearest fault size and the mean value of electrical resistivity and the average volumetric fracture intensity ($P_{32}$) was estimated as $3.1m^2/m^3$. Size (or equivalent radius) of the background fractures ranged from 1.5 m to 86 m and followed to power-law distribution based on the fractal property of fracture size, using fractures measured on underground silos and identified surface faults.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.4
• /
• pp.413-419
• /
• 2011

The nano-size hoenycomb structures have the higher ratio of the surface to the volume than macro-size honeycomb structures, and they can maximize the functionality of the electrical and chemical catalyst. The mechanical behaviors of the nano-sized structures are different from ones of the macro-size structure, and it is caused by the surface effect. This surface effect can be investigated by the atomistic simulation; however, the prediction of mechanical behaviors of the nano-sized honeycombs are practically impossible due to excessive computational resources and computation time. In this paper, by combining the bridging method considering the surface stress elasticity model with homogenization method, the mechanical behaviors of the nano-sized honeycombs are predicted efficiently.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.870-876
• /
• 1995

In this paper, a new three-dimensional nodal diffusion code which is based on the AFEN methodology is described and tested. The method expands the homogeneous flux within a node in ter-ms of eighteen analytic basis functions satisfying the diffusion equation at any point of the node. And the nodal coupling equations are derived such that nodal balance, current continuity and leakage balance within an infinitesimally small box around the edge are satisfied. To verify its accuracy, the code was applied to the well-known static LMW benchmark problem and a small core benchmark problem that has the same material properties as the three-dimensional IAEA benchmark problem and compared with two other codes (QUANDRY, VENTURE). The results show that the code provides good accuracy both in the power distribution and in the effective multiplication factor.