• Resources Recycling
• /
• v.19 no.1
• /
• pp.27-32
• /
• 2010

To improve electronic conductivity of cathodic active materials of lithium ion battery, carbonaceous materials is usually added. New mixing method of abrasive milling has been investigated in mixing of graphite and $LiCoO_2$ powders. It would be expected that uniform mixing of graphite reduces capacity fading of cathode of lithium battery. Abrasion milled $LiCoO_2$ composite showed the best electrochemical performance as a cathode material with 1 wt% of graphite content, 300 rpm of milling speed, and 10 min of milling time. The improvement of the electrochemical performances such as cycleability and charge/discharge capacity retention would be mainly attributed to increase of the electronic conductivity and/or prevention of the active materials by uniform dispersion and coating of graphite on $LiCoO_2$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.3
• /
• pp.288-294
• /
• 1990

Two pure fuel oils(#1 oil, #6 oil), theree pure alcohols (methanol, ethanol, propanol) were tested for the fuel characteristics such as miscibility (that established which pure fuels and fuel mixtures could be fired in the boiler), flash point, viscosity. Specific target of the study besides the oil/alcohols or oil/alcohol mixture without any modification and with safety. #1 oil could be mixed without any problems at all concentrations with two of the alcohols; these were the ethanol and propanol. However, miscibility of #6 oil with any alcohols and #1 oil with methanol was not possible and very limited in this study. The measurements of flash point and viscosity for the mixtures were done for the comparisons with the pure fuels. There was a marked change of flame shape and flame luminosity as the alcohol content of the mixtures was increased. The mixture flame shortened and became non-luminous compared with a pure fuel oil flame.

• Korean Journal of Poultry Science
• /
• v.48 no.3
• /
• pp.123-131
• /
• 2021

In this study, we investigated the effect of separate-sex and straight-run rearing system on the productivity of Korean native chickens. A total of 1,140 GSP-Hanhyup^® Korean native chickens were divided into male, female, and straight-run rearing groups, and the survival rate, body weight, feed intake, and feed conversion ratio were investigated from birth to 12 weeks of age. The average survival rate was 97.9%, and there were no significant differences among the groups. Body weight was significantly different among the groups at all weeks of age (P<0.01). After 4 weeks of age, the male group had the highest weight, followed by the straight-run group, and finally the female group. At 10 weeks, the most uniform body weight was shown in the female group (78%), while the lowest was in straight-run group (44%). Comparing the separate-sex and straight-run groups, male chickens were found to have higher body weights in the separate rearing group than in the straight-run group; however, there was little difference in those of female chickens. Feed intake was the highest in the male group, followed by the straight-run group, and lastly, the female group, while the feed conversion ratio had an opposite trend. Although there is little difference in the production performance of chickens between separate-sex rearing and straight-run rearing system, we concluded that the separate-sex rearing system is much more advantageous than the straight-run rearing system in terms of productivity due to group uniformity.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.150-154
• /
• 2017

A self-propelled turner was developed to produce mushroom compost at low costs and high efficiency, and the uniformity of compost produced by an excavator, compost mixer, and self-propelled turner was compared. The material of the compost was mixed with rice straw and chicken manure at a dry weight ratio of 3:1. After the final turning, internal temperature distribution, water content of the compost pile, ash ratio, and uniformity of the compost pile were examined. After the compost was completed, the water content was $69.9{\pm}0.54%$, $72.1{\pm}0.15%$, and $74.5{\pm}0.82%$, respectively. The length of rice straw was $47.5{\pm}15.4cm$, $24.9{\pm}10.1cm$, and $31.0{\pm}10.6cm$, respectively. The ash content in the dry weight of each compost was $25.0{\pm}6.2%$, $33.6{\pm}4.2%$, and $28.2{\pm}1.1%$, respectively. The deviation in the length of rice straw was affected by the linear velocity of the spinner in the compost mixer and the self-propelled turner, which were 21.5 m/sec and 9 m/sec, respectively. As a result, the most uniform mushroom compost was produced by the self-propelled turner.

• The Korean Journal of Rheology
• /
• v.8 no.3_4
• /
• pp.187-198
• /
• 1996

최근에 본 연구자에 의해서 단축 스크류 공정에서 카오스 스크류라고 명명되어진 카오스 혼합장치가 성공적으로 개발되었다. 기하학적 조건이나 공정조건에 대한 설계변수로 카오스 스크류를 설계하기 위하여 체류시간, 포인카레 단면 그리고 혼합패턴등에 대한 계산 과 해석이 이루어져야 하는데 이를 단지 Runge-Kutta 방법에 의해 속도장을 적분한다면 상당한 계산시간이 소비된다. 이러한 수치문제를 극복하기 위하여 본논문에서는 새로운 사 상법을 제안한다. 이 방법으　 사용하면 벽면 근처의 특이점 영역에서도 수치문제가 해결된 다. 본 논문에서 제안하는 수치사상법은 Runge-Kutta 방법에 비하여 수치계산의 효율성과 정확도 면에서, 특히 유안요소법으로 얻은 속도장에 대하여 우수함이 밝혀졌다. 이러한 사상 법은 공간주기 유동장뿐만 아니라 시간주기 유동장에서 적용할수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2376-2384
• /
• 1992

A theoretical analysis is carried out to predict the characteristics of transient ignition phenomena for the spherical fuel droplets cloud with non-uniform droplet size and number density distribution. Numerical calculations are performed for various cases depending on the combinations of the major parameters such as ambient temperature and initial distributions of droplet size and number density. The results of present study show that the ignition delay decreases for higher ambient temperature and smaller droplet size. Droplets cloud of hollow type with outer concentrated distribution ignites most rapidly.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.371-380
• /
• 2001

In this paper, lightness mapping for uniform color distribution and gamut mapping for maximum chroma reproduction are proposed. In the conventional lightness mapping, the average lightness difference between the two gamut is increased and different color changes in bright and dark regions are also increased. To solve these problems, a lightness mapping is proposed that minimizes the lightness difference of the cusps at each hue angle and produces same color changes in bright and dark regions. Also, gamut mapping that utilize variable anchor point and an anchor point are proposed for maximum chroma reproduction and uniform color change. Accordingly, the proposed algorithm can reproduce high quality images with low-cost color devices.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.53-57
• /
• 2014

We describe the preparation of highly-ordered etching pits on the Nb foil through a micromachining. The effects of electrochemical polishing on the formation of uniformly-patterned protective epoxy layer was investigated. Unlike the previous process using $O_2$ plasma, well-ordered etched pits were prepared without any dry processes. As a result, the Nb foil with the well-ordered pits of $10{\mu}m{\times}5{\mu}m$ could be obtained by electrochemical etching in methanolic electrolytes for 10 min.

• Journal of Korea Water Resources Association
• /
• v.37 no.5
• /
• pp.387-395
• /
• 2004

A computer model was proposed to simulate channel changes and bed material sorting of the meandering channels with different grain size in time and space simultaneously. The bed at the outside of the meandering channel with mixed sediments was scoured deeply and composed of coarser materials, and at the inside was aggradated and composed of finer materials. The sorting process started at the upstream inflection point and was finished at the downstream inflection point. At the natural with complicated boundaries and non-uniform grain sizes, the bed near the outside at the bend and narrow width was scoured deeper with coarse materials than in the channel with uniform grain sizes. The point bars showed lip at the inside near the bend and the bed materials were finer The bed at the outside near the bend and in the narrow width was scoured deeply with the coarser materials.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.71-71
• /
• 2018

본 연구는 각시톱시네고사리(Dryopteris hangchowensis Ching)의 전엽체 증식 및 포자체 형성을 위한 번식방법을 구명하고자 수행되었다. 각시톱지네고사리의 식물체를 무가온 온실에 재배하면서 포자를 채취하였으며, 수집된 포자는 기내에서 발아시켜 전엽체를 획득한 다음 계대배양하면서 실험의 재료로 사용하였다. 전엽체 대량증식을 위하여 1/4, 1/2, 1배로 조절한 MS배지와 Knop배지를 조성하였다. 이후 전엽체 300mg을 균일하게 다져 조성된 배지에 8주간 배양하였다. 연구의 결과, 전엽체의 생체중은 1/2MS와 1/4MS에서 3.4g으로 가장 많이 증가하였다. 현미경 관찰의 결과, 두 배지 모두 정상적인 전엽체의 형태로 발달하였으며, 생육도 양호하였다. 포자체 형성을 위한 적정 배양토의 혼합조건을 확인하고자 원예상토, 피트모스, 펄라이트 및 마사토의 혼합비율을 5종류로 달리하여 조성하였다. 준비된 배양토를 사각분($7.5{\times}7.5{\times}7.5cm$)에 충진 후 기내 배양한 전엽체 1g과 증류수를 함께 10초간 분쇄하여 토양표면에 균일하게 분주한 다음 12주간 재배하였다. 연구의 결과, 원예상토, 피트모스, 펄라이트를 1:1:1(v:v:v) 비율로 혼합한 토양에서 포트 당 223.7개로 가장 많은 포자체가 형성되었다. 또한 형성된 포자체의 생육을 조사한 결과, 상기 토양에서 생체중, 엽수, 엽장, 엽폭, 근수, 근장 및 SPAD value 등의 생육수치가 우수하였다. 따라서 각시톱시네고사리의 전엽체 증식에 적합한 배지는 경제성과 생육수준을 고려하여 1/4MS 배지가 적합하며, 포자체 대량생산을 위해서는 원예상토, 피트모스, 펄라이트를 1:1:1(v:v:v)로 혼합한 토양이 적합하다고 판단되었다.