• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.604-609
• /
• 2008

Analyses were conducted to estimate carcass component of yield grade factors by sex and live weight class and to develop the prediction equation of retail product weight by sex in Korean native cattle (Hanwoo). Data from 42,113 Hanwoo carcasses were used to estimate the traits of yield grade factor and an additional 1,066 carcasses were used to develop the prediction equation of retail meat weight. The average of fasting weight of cow, bull and steer were 529 kg, 596 kg, and 634 kg respectively. Carcass weight (CW), backfat thickness (BFT), loineye area (REA), Index score of wholesale meat and yield grade were significantly (p<0.01) affected by sex and live weight. The lean meat percentage, fat percentage and bone percentage based on the weight of cold carcasses were significantly different (p<0.05) between sex groups. The equation of predicting the retail meat product from this study could be expressed as a multiple regression $Y=-4.18+0.63{\times}CW\;(kg)-0.17{\times}BFT\;(cm)+0.16{\times}REA\;(cm^2)$, $R^2=0.93$. Among the independent factors, the BFT was the highest contributor to the prediction equation. Using the equation from this study should allow for rapid, precise and cost-effective assessment of the retail product in Hanwoo beef carcasses.

• Korean Journal of Plant Resources
• /
• v.20 no.4
• /
• pp.267-271
• /
• 2007

This study was carried out to examine optimal hot water treatment time in Albizzia julibrissin seeds. Germination and moisture absorption characteristics among intact seeds, immersed seeds for 24 hours in distilled water and hot water treated seeds were surveyed. As result, treated seeds showed a highly significant difference with intact and immersed seeds (p<0.0l). Especially, treated seed for 2.0 minutes represented the highest percent of germination (PG). But mean germination time (MGT) did not have significant difference between non-treatment and treatments (p=0.502). Germination speed and germination performance index showed similar tendency with PG. In percent of moisture absorption (PMA) and moisture absorption rate constant (MARC) treatments had higher values than non-treatment whereas 2.0 minutes treatment was lower than non-treatment in initial moisture absorption rate (IMAR). In relation between germination properties and moisture absorption characteristics, all properties except MGT among germination properties had high correlations with PMA and MARC ($r=0.854{\sim}0.931$,p<0.01) whereas IMAR didn't have correlation.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.35-40
• /
• 2019

In this study, the mass flow rate of the heat release rate equation, which is the major factor of the oxygen consumption method, was analyzed for the fundamental investigation of the cone-calorimeter (5 m length and 0.3 m diameter). The shapes of a completely empty inside, 3 mm pore diameter mesh and pore diameter 10 mm honeycomb with 0.76 porosity were constructed using the cone-calorimeter. To calculate the mass flow rate, four bi-directional probes and thermocouples were installed in a uniform position in the vertical direction of flow. The velocity gradient and flow perturbation were measured from the increase in Reynolds number. As the flow capacity increased, the speed gradient increased in all three shapes relative to the turbulence intensity. In addition, the deviation of extended uncertainty to the mass flow was completely low in the order of empty space, mesh (d_p = 3 mm) and honeycomb (d_p = 10 mm and 𝜖 = 0.76) at the 95% confidence level. The results can be used in designs to improve the flow stability of the cone calorimeter.

• The Korean Journal of Malacology
• /
• v.32 no.4
• /
• pp.297-328
• /
• 2016

This study was performed to know and compare the community structures of macrobenthic invertebrates of five fishing grounds in the coastal waters of Jeju Island from 2013 to 2015. A total of 629 species was identified. Molluscans comprised 282 species (44.8%), Arthropods 88 (14.0%), Poriferans 61 (9.7%), Bryozoans 52 (8.3%) and the others including Cnidarians 51 (8.1%). Density and biomass were estimated to be $71,007ind./m^2$ and $599,208.0gwwt/m^2$, respectively. Gastropods was the most dominant taxon in terms of abundance ($24,625ind./m^2$ ) and number of species as well, and Gastropods was predominant in biomass ($190,789.0gwwt/m^2$). The dominant species were Omphalius pfeifferi, Astralium haematragum, Musculus viridulus, Halosydna brevisetosa, Phascolosoma scolops, Herdmania monus in 5-20 m. Based on the cluster analysis, the study area could be divided into five station groups. The biodiversity, evenness and richness index appeared as follows: H' = 4.28-4.64, E' = 0.74-0.79, R = 33.17-35.45. The dominance index were highest in Sagye and lowest in Sinhung.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.480-487
• /
• 2006

This study was conducted to improve the germination percent and germination speed by seed priming using polyethylene glycol (PEG) 8,000 solution on Acer mono seed because it has low and irregular germination characteristics. Seed priming was carried out under 0, -0.25, -0.5, -1.0 and -2.0 MPa of water potential at $20^{\circ}C$ for 3 days. Primed seeds showed higher percent germination, germination speed, mean germination time (MGT) and germination performance index (GPI) than unprimed seeds. Especially, primed seed with -2.0 MPa of water potential had the highest germination properties. And primed seeds had a lower dormancy than the unprimed seeds. Relative growth rate and T/R ratio of seedling from primed seeds were measured to survey the effect of seed priming on the seedling vigor as well as seed germination. The seedlings from primed seeds at -2.0 MPa of water potential showed the highest relative growth rates of height and root collar diameter, however, the lowest value in T/R ratio. This study suggested that seeds priming at -2.0 MPa of water potential under $20^{\circ}C$ for 3 days enhanced not only the percent germination, germination speed, MGT and GPI but also the vigor and growth of seedlings in Acer mono.

• Journal of Korea Water Resources Association
• /
• v.41 no.5
• /
• pp.473-482
• /
• 2008

The purpose of this study is to quantitatively estimate the erosional properties for cohesive sediment from Saemankeum artificial lake. A series of erosion tests were conducted with Chonbuk annular flume, which is the first one constructed in this country and verified with validities. Each erosion tests were conducted under a uniform bed condition but a different bed density respectively, and its critical shear stress for erosion(${\tau}_{ce}$) as well as the erosion rate coefficient (${\varepsilon}_M$) were determined quantitatively. Since the erosional properties of the cohesive sediments vary largely depending in the physico-chemical properties, such properties of Saemankeum sediments were also estimated and their effects on the erosional properties were analyzed. For Saemankeum sediments, it can be seen that ${\tau}_{ce}$ increases from $0.26N/m^2$ to $0.52N/m^2$ and ${\varepsilon}_M$ decreases exponentially from $14.28mg/cm^2\;hr$ to $6.02mg/cm^2\;hr$, as the bed density varies from $1.17g/cm^3$ to $1.34g/cm^3$. The erosional parameters of Saemankeum sediments are found to be remarkably different in quantity as compared with those for cohesive sediments from other sites. Particularly, ${\tau}_{ce}$ for Saemankeum sediments is known to be larger than that of Kunsan sediments but similar with that of Shihwa sediments, while ${\varepsilon}_M$ for Saemankeum sediments is shown to be smaller than that for Kunsan sediments.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.717-724
• /
• 2001

This study was conducted in an attempt to quantify some traits that may be involved in the reproductive process of Pinus thunbergii. During the past 6 years (1995-2000), we surveyed flowering patterns of 60 P. thunbergii clones in a seed orchard which was established in Anmyon-do, 1979. From this survey, we estimated clonal contributions of male and female flowers and sexual asymmetry. Among 60 clones, 18 clones (30%) accounted for 0.37 (1999)~0.46 (1995) of clonal contribution in female flowers and 0.44 (1999)~0.57 (1995) of clonal contribution in male flowers. As compared with the previous reports in other pine species, more clones made contributions to reproductive process in P. thunbergii seed orchard. The relative effective population numbers for females (v♀) varied from 0.59 (1995) to 0.91 (1999) and those for males ( v♂) were between 0.56 (1995) and 0.83 (1998) at gamete level. This showed that the female gametes effectively contribute to the reproductive process more than did the male gametes. The relative effective population numbers at clonal level ($v_b$) were in the range of 0.72 (1995) and 0.93 (1999). More than 73% of the total clones showed values of 0.4~0.6 ($0.5{\pm}0.1$) in maleness index. The values averaged over all the clones were temporally variable with the range of 73% in 1996 and 100% in 2000. The degree of sexual asymmetry ($A_s$) ranged from 0.09 to 0.26. These values were relatively low when compared with those of other trees, suggesting that P. thunbergii seed orchard remains a high level of homogeneity in the number of male and female. All of the various types of effective population numbers were positively correlated with each other while they were negatively correlated with the degree of sexual asymmetry.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.147-156
• /
• 2012

This study evaluated the effects of presoaking apple slices in 2 or 5% brine solution prior to air-drying at $50^{\circ}C$. Several quality factors of the dried apples were measured including moisture content (MC), water activity ($a_w$), shear force, color values, appearance and consumer likability. Except at time 0, the $a_w$ of presoaked samples was lower than those of control during and after drying. The relationship between MC and water activity during drying was well-fit by an exponential model. During drying, the moisture contents of presoaked samples were slightly higher than control samples with no presoaking. However, the $a_w$ of presoaked slices were lower than control at a given drying time. At a given $a_w$, presoaked slices had higher moisture content. The shear force was lower for samples presoaked in brine solution, particularly at shorter drying times. Presoaked apple slices also were lighter in color after drying than controls. Sensory evaluations suggest that presoaking of apple slices before drying may help enhance palatability. Samples presoaked in 2% brine solution had the highest scores for taste, texture and overallacceptability, while those presoaked in 5% brine solution had the highest scores for appearance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.695-700
• /
• 2018

This paper presents the development of compact and lightweight broadband power amplifier module using HMIC (Hybrid Microwave Integrated Circuit) technology that could be high-density integration for many non-packaged microwave components into the small area of a high dielectric constant printed circuit board, such as a ceramic substrate, also using the special design and fabrication schemes for the structure of minimized electromagnetic interference to obtain the homogeneous electrical performance at the wideband frequency. The results confirmed that the small signal gain has a gain flatness of ${\pm}1.5dB$ within the range of 32 to 36 dB. In addition, the output power satisfied more than 30 dBm. The noise figure was measured within 7 dB, and OIP3 (Output Third Order Intercept Point) was more than 39 dBm. The fabricated broadband power amplifier satisfied the target specification required to electrically drive the high power amplifiers of jamming generators for electronic warfare, so the actual applicability to the system was verified. Future studies will be aimed at designing other similar microwave power amplifiers in the future.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.295-302
• /
• 2022

Sparse-view computed tomography (CT) imaging technique is able to reduce radiation dose, ensure the uniformity of image characteristics among projections and suppress noise. However, the reconstructed images obtained by the sparse-view CT imaging technique suffer from severe artifacts, resulting in the distortion of image quality and internal structures. In this study, we proposed a convolutional neural network (CNN) with wavelet transformation and residual learning for reducing artifacts in sparse-view CT image, and the performance of the trained model was quantitatively analyzed. The CNN consisted of wavelet transformation, convolutional and inverse wavelet transformation layers, and input and output images were configured as sparse-view CT images and residual images, respectively. For training the CNN, the loss function was calculated by using mean squared error (MSE), and the Adam function was used as an optimizer. Result images were obtained by subtracting the residual images, which were predicted by the trained model, from sparse-view CT images. The quantitative accuracy of the result images were measured in terms of peak signal-to-noise ratio (PSNR) and structural similarity (SSIM). The results showed that the trained model is able to improve the spatial resolution of the result images as well as reduce artifacts in sparse-view CT images effectively. Also, the trained model increased the PSNR and SSIM by 8.18% and 19.71% in comparison to the imaging model trained without wavelet transformation and residual learning, respectively. Therefore, the imaging model proposed in this study can restore the image quality of sparse-view CT image by reducing artifacts, improving spatial resolution and quantitative accuracy.