• Journal of the KSME
• /
• v.28 no.4
• /
• pp.343-348
• /
• 1988

몇 가지 균열검출법 및 크기의 측정법에 대하여 개요, 문제점, 정량적 측정에 유의해야 할 점을 살펴보았다. 아직 어느 방법도 모든 균열에 적용할 만큼 완전한 방법은 없지만 적용범위와 유 의사항을 이해하고 측정대상에 맞는 방법을 올바로 적용한다면 목적에 부합하는 결과를 얻을 것으로 본다. 기기나 구조물의 파괴원인을 정확히 규명하고 잔존수명을 정확히 예측하여 파괴를 방지하려면 재료의 강도특성이나 파괴역학적 해석법의 연구에 못지 않게 비파괴적 균열검출법과 정량적 측정법에 관한 연구도 깊이 이루어져야 하리라 믿는다. 그러나 아직 우리나라에서는 이 점에 미흡함이 많다. 더 나은 측정방법을 고안해 내고, 측정장치를 개발하여 균열에 대한 정보 의 정확성을 높여 구조물의 안전성 평가의 신뢰성을 향상시킬 수 있는 연구가 활발히 진행되 어야 할 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1897-1902
• /
• 2008

In computer vision analysis of detecting concrete slab surface cracks, there are many difficulties to overcome. Target images often have defamations due to the light condition and other external environment. Another difficulties in detecting concrete crack image is that there is no clear distinction in intensity between the crack and the surface since the surface is often irregular. In this paper, we apply ART2 based quantization in order to classify target concrete slab surface images into several areas with respect to the light intensity. From those quantized areas, we investigate the distribution of real cracks and noises. Then, we extract candidate crack areas after applying noise removal process to areas which have be th oracle and noises. Finally, crack areas are recognized by using morphological features of cracks from such candidate areas. In experiment with real world concrete slab structure images, our algorithm has advantage in recognizing accuracy of cracks to other algorithms especially in relatively brighter areas of concrete surface.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.576-579
• /
• 2004

Eventhough the productivity has been improved remarkably by introducing automatic facilities, the 100％ inspection is necessary because the possibility to produce large amount of defective goods is also increased. Since it is extremely unreasonable that workers inspect very large amount of products as 100％ inspection, there has been many researches for the automatic inspection system. In this thesis, we develop an automatic detection system of suspension insulator's minutes cracks System The automatic detection system of suspension insulator's minute cracks： To detect the minute cracks of suspension insulators, images of the insulator are acquired with a progressive scan camera, rotating a suspension insulator on a turning table. And after the shadow and noises are eliminated by preprocessing techniques, we detect minute cracks using the features of them.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.80-89
• /
• 2017

The classical approaches to detect cracks are performed by experienced inspection professionals by annotating the crack patterns manually. Because of each inspector's personal subjective experience, it is hard to guarantee objectiveness. To solve this issue, automated crack detection methods have been proposed however the methods are sensitive to image noise. Depending on the quality of image obtained, the image noise affect overall performance. In this paper, we propose crack detection method using a convolutional encoder-decoder network to overcome these weaknesses. Performance of which is significantly improved in terms of the recall, precision rate and F-measure than the previous methods.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.374-381
• /
• 2017

Concrete sleepers, installed on majority of railroad track in this nation can, if not maintained properly, threaten the safety of running trains. In this paper, an algorithm for automatically identifying cracks in a sleeper image, taken by high-resolution camera, is developed based on Adaboost, known as the strongest adaptive algorithm and most actively utilized algorithm of current days. The developed algorithm is trained using crack characteristics drawn from the analysis results of crack and non-crack images of field-installed sleepers. The applicability of the developed algorithm is verified using 48 images utilized in the training process and 11 images not used in the process. The verification results show that cracks in all the sleeper images can be successfully identified with an identification rate greater than 90%, and that the developed automatic crack identification algorithm therefore has sufficient applicability.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.448-453
• /
• 1999

원전의 열성층 현상으로 발생하는 열 피로균열 및 입계응력부식균열(IGSCC) 등은 결함에 대해서 검사자의 특별한 관심과 노력 없이는 초음파를 이용해 이러한 종류의 결함검출 및 크기 측정이 쉽지 않다. 이러한 결함의 검출 및 크기 측정을 위해서 먼저 초음파 모드 변환 기법을 사용하여 결함 검출 및 결함 크기를 분류한 후에 결함 끝단에서의 초음파 회절파(tip diffraction)를 이용한 여러 가지의 초음파 기법 둥으로 정확한 결함 크기를 측정하여 가동전 중점검시 발견된 결함의 추적 관리 및 결함평가신뢰도 향상에 기여하고자 한다. 따라서, 여기서는 열 피로균열 및 입계응력부식균열 등과 같은 결함의 정확한 검출 및 크기 측정을 위해 초음파 모드 변환 기법의 특성을 철저히 이해하고 이에 관련된 초음파 신호들을 정확히 구분할 수 있는 방법을 기술하였다.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.11
• /
• pp.449-456
• /
• 2019

This paper is a study on the construction of a wall-climbing mobile robot using vacuum suction and wheel-type movement, and a comparison of the performance of an automatic wall crack detection algorithm based on machine learning that is suitable for such an embedded environment. In the embedded system environment, we compared performance by applying recently developed learning methods such as YOLO for object learning, and compared performance with existing edge detection algorithms. Finally, in this study, we selected the optimal machine learning method suitable for the embedded environment and good for extracting the crack features, and compared performance with the existing methods and presented its superiority. In addition, intelligent problem - solving function that transmits the image and location information of the detected crack to the manager device is constructed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.44-49
• /
• 2017

본고에서는 열유도 적외선 열화상 기법의 원리와 응용에 있어 기초적인 개념, 특정 상태량 및 실험적 기법에 대하여 소개하도록 한다. 유도 열화상 기법에 적용되는 유도 주파수의 범위는 1500 Hz ~ 52 MHz이며 강자성 강재 단조 부품의 표면결함 검출에 사용되어진다. 균열 검출 감도는 자분탐상기법과 유사하나 필요한 경우 유도 주파수를 낮춤으로서 강재에 숨겨진 결함을 검출할 수 있다. 탄소섬유강화폴리머(CFRP)에서는 섬유 결함을 검출하며, 실리콘 태양 전지에서는 양호한 열적 콘트라스트와 함께 균열을 검출한다. 유도 열화상 기법의 향 후 대표적인 활용분야로는 레일 및 휠과 같은 철도 구성요소에서의 결함 탐상이 있다[1].

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.162-169
• /
• 2012

This study detected SCC defects of dissimilar metal welded(STS304 and SA106 Gr. b) pipes using the ultrasonic infrared thermography method and the lock-in image treatment method among infrared thermography method. The infrared excitement equipment has 250 Watt of output and 20 kHz of frequency. By using the ultrasound infrared thermography method, the internal defects of dissimilar metal weld joints of pipes used at nuclear power plants could get detected. By an actual PT test, it was observed that the cracks inside the pipe existed not as a single crack but rather as a multiple cracks within a certain area and generated a hot spot image of a broad area on the thermography image. In addition, UT technology could not easily defects detected by the width of $10\;{\mu}m$ fine hair cracks. but, ultrasound infrared thermography technique was defect detected.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.6
• /
• pp.455-463
• /
• 1998

RCCA(rod cluster control assembly) End-Tip suffers from neutron irradiation and constant vibration due to high-speed internal flow of primary coolant during plant operation. Such operating conditions cause the RCCA end-tip crackings around tile circumferential weldment of the end-tip, and in some cases, the defective end-tips were completly broken loose. However, no reliable inspection techniques for end-tip crackings were developed in the past, although some techniques exist for inspecting RCCA control rod wears. Therefore, NDE group at KEPRI has developed an ECT technique for the detection and the sizing of the end-tip crackings. The technique uses a specially designed surface-riding probe that can detect size of circumferential crackings with an accuracy of ${\pm}5.31%$ RMS error. This paper describes the ECT instrumentation including the ECT probes, calibration bars, as well as technical approaches.