• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.1
• /
• pp.35-50
• /
• 2000

본 논문에서는 반복하중을 받는 철근 콘크리트 쉘구조물의 해석을 위한 비선형 유한요소 해법을 제시하였다 유한 요소로서는 충상화기법을 이용한 부재회전강성도를 갖는 4절점 평면 쉘요소가 개발되었다 두께 방향에 대한 철근과 콘크리트의 재료성질을 고려하기 위하여 충상화기법이 도입되었다. 재료적 비선형성에 대해서는 균열콘크리트에 대한 인장, 압축, 전단모델과 콘크리트중에 있는 철근모델을 조합하여 고려하였다. 이에 대한 콘크리트의 균열모델로서는 분산균열모델을 사용하였으며 철근에 대해서는 1축 응력상태로가정하여 등가의 분산 분포된 철근량으로 모델화하였다 구성모델은 재하, 제하 그리고 재재하과정을 포함하여 요소는 반복하중하에서 철근콘크리트 쉘의 거동을 파악할 수 있다 신뢰성 있는 실험결과와 비교를 통하여 본 논문의 해석방법이 반복하중을 받는 철근콘크리트 쉘구조의 비선형 해석에 적합한 방법임을 입증하고자 한다.

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.111-120
• /
• 1994

Cracks in rubber bonded to a rigid material such as steel are analyzed with the aid of a mixed finite element technique. Firstly the weak form is derived for finite element analysis of an incompressible material, and the Mooney-Rivlin form is assumed for the constitutive modeling of rubber. The numerical results from finite element analysis is examined to confirm the accuracy and convergence of solution by way of comparison to other numerical results. The interpretation of the J-integral for large elastic deformation as the energy release rate is confirmed, and the J-integral is calculated for varing crack length. The crack growth stability is discussed using the result of finite element analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.887-897
• /
• 1991

본 연구에서는 이와 같은 배경에서, Fig. 1(f)와 같이 가장 일반적인 이방성 재료가 접합된 경우의 응력확대계수를 명확히 정의하고, 수치해석법으로 구할 수 있는 외삽식을 제안한다. 또한, 탄성문제의 수치해석 방법으로 적은 요소의 분할로써 고 정밀도의 수치해석 결과를 얻을 수 있는 경계요소법(boundary element method:BEM), 특히 저자들이 개발한 복합재료에 대한 2차원 경계요소법 프로그램을 이용하여 이방성 이종재료 접합계면 균열의 응력확대계수를 해석하고, 복합재료내의 섬유방향에 대한 접합계면 균열의 정성적 거동을 고찰하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1592-1602
• /
• 1990

Mixed mode surface crack in finite-width plate subjected to uniform tension and bending has been analyzed in 3-D problem by using boundary element method. The calculations were carried out for the surface crack angles(.a/pha.) of 0.deg., 15.deg., 30.deg., 45.deg., 60.deg., and 75.deg., and for the aspect ratio(a/c) of 0.2, 0.4, 0.6 and 1.0 to get stress intensity factors at the boundary points of the surface crack. For the aspect ratio of 1.0 and the surface crack angles, finite element method was used to check the results in this study. Comparison of the results from both methods showed good agreement.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.124.2-124.2
• /
• 2005

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.26-31
• /
• 2003

각종 산업설비에서 발견되는 균열의 대부분은 임의의 형상을 갖는 삼차원 균열이므로 설비의 건전성 평가를 위하여 삼차원 균열에서의 응력강도계수를 정확히 구하는 문제는 많은 사람들의 관심의 대상이 되어왔다. 현재 삼차원 균열에 대한 연구는 타원형 균열과 같은 일부 비교적 간단한 형태의 균열에 대해서는 많은 결과가 발표된 바 있으나, 일반적인 형태의 균열에 대해서는 아직 연구가 미비한 실정이다. 따라서, 이러한 일반적인 형태의 삼차원 균열에 대한 해석의 필요성이 제기되어 왔다.(중략)

• Tunnel and Underground Space
• /
• v.21 no.2
• /
• pp.128-137
• /
• 2011

The shut-in pressure calculated in common hydrofracturing test for vertical borehole equals generally to the minimum horizontal principal stress, so it should be considered as an essential parameter for determining the in-situ stress regime around the rock mass. It shows usually an ambiguous value in pressure-time history curves, however, because of the relationship between the behavior of hydraulic fractures and the condition of remote stress regime. In this study, a series of numerical analyses have been carried out to compare several methods for determining the shut-in pressure during hydrofracturing. The hydraulic-mechanical coupling has been applied to numerical analysis for simulating the fracture propagation by hydraulic pressure, and the different discontinuity geometry has been considered in numerical models to examine the effect of numerical element shape on fracture propagation pattern. From the numerical simulations with the four different discontinuity geometries, it was revealed that the shut-in pressure obtained from graphical methods rather than statistical method was relatively small. Consequently a care should be taken in selecting a method for determining the shut-in pressure when a stress anomaly around borehole and a fracture propagation with complicate mechanism are considered.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.521-527
• /
• 2013

This study provides the elastic stress intensity factors, K, for circumferential and longitudinal surface cracked straight pipes under single or combined loads of internal pressure, bending, and torsion based on three-dimensional (3D) finite element (FE) analyses. FE results are compared with two different types of defect assessment codes (API-579-1 and RCC-MR A16) to prove the accuracy of the FE results and the differences between the codes. Through the 3D FE analysis, it is found that the stress intensity factors are sensitive to the number of elements, which they were believed to not be sensitive to because of path independence. Differences were also found between the FE analysis results for crack defining methods and the results obtained by two different types of defect assessment codes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.401-407
• /
• 2014

In this paper, the effect of cohesive laws on the finite element analysis of crack propagation using cohesive elements is investigated through three-point bending and double cantilever beam problems. The cohesive elements are implemented into ABAQUS/Standard user subroutines(UEL), and the shape of cohesive law is varied by changing parameters in polynomial functions of cohesive traction-separation relations. In particular, crack propagation behaviors are studied by comparing load-displacement curves of the analysis models which have different shapes of cohesive laws with the same values of fracture energy and cohesive strength. Furthermore, the influence of the element size on crack propagation is discussed in this study.

• Computational Structural Engineering
• /
• v.9 no.4
• /
• pp.127-134
• /
• 1996

This paper is about a progressive fracture analysis of concrete by boundary element method. From both displacement boundary integral equation and traction boundary integral equation of solids with cracks, a boundary integral equation for crack problem is derived. For the analysis of progressive fracture of concrete, fracture process zone is modelled based on Dugdale-Barenblatt model with linear tension-softening curve. By using the boundary element modeling, the progressive fractures of concrete beam and compact-tension specimens with various loading conditions are analyzed and compared with experiments. The analysis results show that the technique in this paper can predict the maximum strength and the nonlinear behavior of concrete including post-peak behavior.