• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.352-363
• /
• 2021

The purpose of this study was to evaluate the load of nutrients contained in the drainage discharged from the facility horticultural complex and to use them for re-use of fluids and design for introduction of water treatment plants. Representative hydroponic cultivation crops were selected as tomato, paprika, cucumber, and strawberry, and the total number of samples analyzed for water quality was 80. As a result of the analysis, since various fertilizer components such as N, P, K⁺, Na⁺, Mg²⁺, Ca²⁺, Si₄⁺, HCO₃^-, Cl^-, S^2-, Fe, Mn, Cu, Zn, Mo and B are contained at very high concentrations in the drainage, the need for water treatment was confirmed. Through statistical analysis, it was analyzed that the drainage concentration of strawberries was lower than that of tomatoes, paprika, and cucumbers. In the case of tomatoes, these essential ion concentrations are the highest, so it was confirmed that they are subject to valuable resources in terms of reuse of fertilizers. The load of N and P of the drainage discharged from the facility horticultural complex 1m² was analyzed. For N, the daily processing capacity of 4.0 kg of tomatoes, 3.3 kg of paprika, 3.0 kg of cucumbers, and 1.5 kg of strawberries was calculated based on 1 ha. It was suggested that the P concentration needs a scale and capacity that can handle 0.5 kg of tomatoes, 0.6 kg of paprika, 0.4 kg of cucumber, and 0.2 kg of strawberries per day. Through this study, the amount of nitrogen and phosphorus contained in the drainage discharged from the greenhouse of each crop was evaluated to analyze the economy. In addition, it was expected to be used as basic data that can be used to calculate the treatment capacity to be reflected when introducing water treatment facilities in facility horticultural complexes for sustainable agriculture.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.10
• /
• pp.21-29
• /
• 2021

Most concrete gravity-type dams in and out of the country were constructed by column method to control cracks caused by concrete hydration heat generated during construction, resulting in a certain level of leakage after impoundment through various causes, such as contraction joints and construction joints. However, due to the characteristics of concrete structures that shrink and expand according to temperature, concrete dams have vertical joints and drains to allow penetration. PVC waterproof shows excellent effects in completion of the dam, which however increases the possibility of interfacial failure due to different thermal expansion. Other causes of penetration may include problems with quality control during installation, generation of cracks due to heat of hydration of concrete, waterproofing methods, etc. In the case of Bohyunsan Dam in Yeongcheon, North Gyeongsang Province, the amount of drainage in the gallery was checked and underwater, and it was confirmed that there are many penetrations from drainage holes connected to vertical joints, and that some of the PVC waterproofs are not fully operated. As a new method to prevent penetration through vertical joints, D.S.I.M. (Dam Sealing Innovation Method) developed by World E&C was applied to Bohyunsan Dam and checked the amount of drainage in the gallery. As a result of first testing three most leaking vertical joints, the drain in the gallery was reduced by 87% on the average and then applied to the remaining 13 locations, which showed a 83% reduction effect based on the total drain in the gallery. Summing up these results, it was found that D.S.I.M. preventing water leakage from the upstream face is a valid construction method to reduce the water see-through and penetration quantity seen in downstream faces of concrete dams. If D.S.I.M. is applied to other concrete dams at domestic and abroad, it is expected that it will be very effective to prevent water leakage through vertical joints that are visible from downstream faces.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.3-34
• /
• 2018

Korea's air transport industry has a 70-year history since Korea National Airline was establishment in October 1948. Korea has 9 airlines which have international air transport business licenses, and as of 2017, air transport performance(Domestic & International) is ranked 8th in the world. Through analysis of Korea's air transport industry, this paper examines the essential problems of the domestic air transport industry and what policies and laws should be supplemented, and presents an "Policy Directions for the Air Transport Industry" that can continue to grow into a global aviation leading country in the future. Analysis of aviation statistics shows that the nation's air transport industry has a very high growth rate, and national airlines continue to invest in sustainable growth. Furthermore, new companies are also trying to enter the market. As of November 2018, four companies applied for licenses for international air transport business, one for international air transport business (cargo) license, and the Ministry of Land, Infrastructure and Transport is expected to decide whether to issue the license by first quarter of 2019. While some expect price reductions and consumer benefits through competition promotion, others worry about worsening airline financial structures and reducing safety investment due to competition. To sum up the problems of the nation's air transport industry, first, low-cost airlines focus only on attracting domestic demand, and thus have a weak foundation for continued growth. Second, the rapid growth in recent years has led to the lack of aviation professionals such as pilots and technicians and the saturation of slots at major airports. Third, since the financial soundness of airlines is not systematically managed, the financial situation of airlines can quickly deteriorate and the damage can be attributed to consumers. In order for the national airlines to continue to develop, the first is to focus on the endless demand of the global aviation market and to secure international competitiveness. Second, the government should support the airline infrastructure according to the size of the air transport industry, third, we will systematically nurture aviation experts who will lead the future of the nation's air transport industry, and finally, the government will have to continuously manage the financial status of airlines to prevent consumer damage in advance. Nowadays the air transport industry has become very competitive. Not only do airlines have to work hard for the sustainable development of national airlines, but all government agencies must support our airline companies in policy to win international competition.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.2
• /
• pp.117-132
• /
• 2019

The study examines the significance and limits of modern park planning by analyzing major planning documents of Gyeongseong in the Japanese colonial era. Among seven selected documents from 1925 to 1940, which show the contents related with park planning, documents of 1930 and 1940 presented the official park plan of Gyeongseong. By the 1920s, the park plan was not a major concern in urban planning of Gyeongseong; however, as the planning law as enacted in 1934, the park plan legally became a part of the official master planning process in the 1930s. In 1940, the most comprehensive park plan for Gyeongseong was published. In the beginning of modern urban planning, a park was mainly perceived as a sanitation utility. From the 1920s to the 1930s, the park planning system was significantly improved including systemic classification of parks, guideline development considering spatial planning, and introduction of a concept of infra-structural green space. Despite of the improvement in the park planning, the actual quantity of the overall green spaces barely changed and there was a huge discrepancy between the planning ideal and the reality. The Gyeongseong stadium was the only facility newly built in the 1920s, and only two parks were constructed in the 1930s. The plan to build 38 new parks in the 1930, and 140 in the 1940 was barely realized. However, there were efforts to improve parks and green spaces of Gyeongseong: Such as appropriating natural forest as parks, designating royal palaces as parks, and focusing on constructing smaller scale children's parks. Even though the ideal plan could not be fully implemented due to the war time situation and tight budget, the park system of Gyeongseong provided the framework of park planning of Seoul after the independence.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.313-319
• /
• 2018

The purpose of this study was to provide the basis for the vegetable seedlings export research and policy establishment by analyzing vegetable seedlings export status from the agricultural quarantine statistics in Korea and the changes of temperature and relative humidity during the vegetable seedlings shipping export transportation to Japan. From 2007 to 2016, various vegetable seedlings such as cabbage, tomatoes, cucumber, onion and etc., have been exported to more than 20 countries around the world. The main exporting country of vegetable seedlings for commercial purposes is Japan, and the major exported seedlings to Japan in 2016 were fruit vegetable grafted seedlings such as eggplant, tomato, cucumber, watermelon and pepper. Total export amount of the fruit vegetable seedlings to Japan in 2016 were 2,575,446 seedlings and it is approximately 0.7 to 1.6 million dollars. The grafted seedlings exported to Japan were consumed for urban agriculture and farm use. Shipping transportation took about 24 hours in the process of receiving the package ${\rightarrow}$ shipment ${\rightarrow}$ quarantine (Busan port) ${\rightarrow}$ Quarantine (Japan Shimonoseki Port). The growing demand for vegetable seedlings due to the development of urban agriculture in Japan and the growing interest and demand for vegetable grafting seedlings in neighboring countries such as Russia will be an opportunity to expand the export size of Korean vegetable grafting seedlings. In order to expand the export of vegetable seedlings in Korea, it is necessary to ensure further active government policy and research on the production of export seedlings, seedlings storage and transportation technology and analysis of exporting countries' market information.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1479-1488
• /
• 2018

On September 3rd 2017, strong artificial seismic signals from North Korea were detected in KMA (Korea Meteorological Administration) seismic network. The location of the epicenter was estimated to be Punggye-ri nuclear test site and it was the most powerful to date. The event was not studied well due to accessibility and geodetic measurements. Therefore, we used remote sensing data to analyze surface changes around Mt. Mantap area. First of all, we tried to detect surface deformation using InSAR method with Advanced Land Observation Satellite-2 (ALOS-2). Even though ALOS-2 data used L-band long wavelength, it was not working well for this particular case because of decorrelation on interferogram. The main reason would be large deformation near the Mt. Mantap area. To overcome this limitation of decorrelation, we applied offset tracking method to measure deformation. However, this method is affected by window kernel size. So we applied various window sizes from 32 to 224 in 16 steps. We could retrieve 2D surface deformation of about 3 m in maximum in the west side of Mt. Mantap. Second, we used Pleiadas-A/B high resolution satellite optical images which were acquired before and after the 6th nuclear test. We detected widespread surface damage around the top of Mt. Mantap such as landslide and suspected collapse area. This phenomenon may be caused by a very strong underground nuclear explosion test. High-resolution satellite images could be used to analyze non-accessible area.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.212-228
• /
• 2013

Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.

• The Journal of Bigdata
• /
• v.3 no.2
• /
• pp.87-99
• /
• 2018

This study analyze the factors affecting the number of bidders in public contracts by collecting contract data such as purchase of goods, service and facility construction through KONEPS among various forms of public contracts. The reason why the number of bidders is important in public contracts is that it can be a minimum criterion for judging whether to enter into a rational contract through fair competition and is closely related to the budget reduction of the ordering organization or the profitability of the bidders. The purpose of this study is to analyze the factors that determine the participation of bidders in public contracts and to present the problems and policy implications of bidders' participation in public contracts. This research distinguishes the existing sampling based research by analyzing and analyzing many contracts such as purchasing, service and facility construction of 4.35 million items in which 50,000 public institutions have been placed as national markets and 300,000 individual companies and corporations participated. As a research model, the number of announcement days, budget amount, contract method and winning bid is used as independent variables and the number of bidders is used as a dependent variable. Big data and multidimensional analysis techniques are used for survey analysis. The conclusions are as follows: First, the larger the budget amount of public works projects, the smaller the number of participants. Second, in the contract method, restricted competition has more participants than general competition. Third, the duration of bidding notice did not significantly affect the number of bidders. Fourth, in the winning bid method, the qualification examination bidding system has more bidders than the lowest bidding system.

• Management & Information Systems Review
• /
• v.37 no.4
• /
• pp.1-20
• /
• 2018

This study aimed to examine earnings quality of firms selected as Global Champs project which has been promoted by the government since 2013 to support small and medium sized enterprises, for the screening year(t-1) and selected year(t). Earing quality is measured as the value of discretionary accruals estimated by Dechow et al.(1995) adjusted Jones model and Kothari et al.(2005) model, respectively. I analyze the differences of earning quality between the Global Champ firms and the paired firms selected through criteria of the similar total assets and the same industry in the screening year and the selected year. This study is motivated by the needs of measurement of the performance of the Project from the accounting transparent point of view. As the results of this study, major findings are summarized as follows. Firstly the earnings quality of the selected firms was lower than that of the paired firms. This can be explained as a result of motivation of earnings management by companies eager to meet the requirements to be selected for the Project. Secondly, in the selected year, the earnings quality was proved to improve, comparing to the screening year. This can be explained by the efforts of companies to reinforce management innovation and transparent management, which in turn led to positive effects on the earnings quality. These findings were found to be consistent in the additional analyses, where the earning quality of the reconstructed sample with only selected companies was compared for the screening year and the selected year, based on the year before the screening year(t-2).

• (The)Study of the Eastern Classic
• /
• no.34
• /
• pp.225-255
• /
• 2009

Few data on the epigraph from the Bal-Hae Dynasty have been reported so far. The present paper, based on an examination of the style of the epitaphic tombstones of Princess Jeong-Hye and Princess Jeong-Hyo, investigates the historical formation and characteristics of Balhae's epitaphic style and its influences on the posterior periods. The epitaphs from the Bal-Hae Dynasty have the following epigraphic characteristics and historical significances. First, Bal-Hae's epitaphs are similar to those from the Goguryeo Dynasty in the sense that they are angular in their form. Tombstones with angular head first appeared during the East Han period. During the Wi-Jin period, however, as tombstones were not allowed to be erected in front of the tomb, small-sized epitaphic tombstones were set up inside tombs. Typical tombstones from the Dang Dynasty had stone pole and square cover. Unlike those from the Dang and the Tong-Il Silla Dynasties, however, the epitaphs from Bal-Hae had angular head in their tombstone body. The Bal-Hae's angular headed tombstones are very likely to testify that Goguryeo's epitaphs, which features an influence from the Wi-Jin Nambuk-Jo period, in turn exerted an effect on those from the Bal-Hae Dynasty. Second, Bal-Hae's epitaphic tombstones are characterized by their hexagonal head,which were modified from the then typical pentagonal head by cutting out the sharp point. The hexagonal head, which has not been found in its neighboring countries during the same historical period, is peculiar to the epitaphic tombstones from the Bal-Hae Dynasty. Third, the edge lines and ornamental figures first appeared in Bal-Hae's epitaphic tombstones, as seen in those of Princess Jeong-Hye. In the fa?ade of the epitaphic tombstone, a carved line demarcates its rectangular body and trapezoidal head. Four faces of the body stonehave two parallel lines in their edges within which vignette was inscribed, and the trapezoidal head part was ornamented with flower figures. Fourth, Bal-Hae's epitaphic tombstone had an extensive influence on the posterior countries in its neighborhood. The epitaphic tombstones in the Bal-Hae style are very often found in those of the Goryeo Dynasty and the Yo Dynasty which were greatly influenced from Bal-Hae. The vestiges of Bal-Hae's epitaphic style are also found in those from the Song, the Geum, and the Won Dynasties.