• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.145-150
• /
• 2013

In the paper, we propose a new CSS(Complex Signed-Signed) CMA(Constant Modulus Algorithm) algorithm for ICS(Interference Cancellation System). When the repeater get the feedback signal, the CSS CMA algorithm is proposed at the ICS repeater using DSP(Digital Signal Processing) for the removal of interfering signals from the feedback paths. The proposed CSS CMA algorithm improved performances and hardware complexity by adjusting step size values. the steady state MSE(Mean Square Error) performance of the proposed CSS CMA algorithm with step size of 0.00043 is about 4dB better than the conventional CMA algorithm. And the proposed Complex Signed Signed CMA algorithm requires 1950 ~ 2150 less iterations than the LMS(Least Mean Square) and Signed LMS(Normalized Least Mean Square) algorithms at MSE of -25dB.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.105-112
• /
• 2002

In this paper, a servo filter design for the gimbal engine actuator system of KSR-III(Korea Sounding Rocket-III) is considered. A reasonable filter structure is determined based on the actuator analytic models. The servo filter consists of a 2-nd order lowpass filter and a 1-st order compensator. The lowpass filter is required to protect the actuator from high frequency vibration, and the compensator to enhance the resulting stability. A Butterworth type servo filter is considered as the simplest one. The final servo filter type is determined by evaluating simultaneously both high frequency gain reduction performance and the corresponding KSR-III stability margin. Consequently it is revealed that a notch type servo filter located on the error between command signal and feedback signal in the control loop is very effective. Later, based on the proposed servo filter type, an onboard servo filter hardware of KSR-III will be designed and tested.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.136-145
• /
• 2003

This paper proposes a DTV receiver using beamforming techniques to improve indoor and mobile reception. The proposed DTV receiver estimates the directions of arrival (DOAs) of incoming signals using Capon's DOA estimation method and generates an adaptive antenna beam pattern to the estimated DOA of the mainpath signal to Improve the channel condition. After beamforming, a following decision feedback equalizer (DFE) removes the remaining multipath components. The proposed receiver can be implemented with a conventional DTV receiver without anymodification. The performance of the proposed receiver is analyzed with modified Brazilian field test models, which include DOA information of Incoming signals. Simulation results show that the proposed receiver can satisfy the threshold of visibility (TOV) when input signal to noise ratio is slightly over 10 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1096-1103
• /
• 2008

This paper proposes an individual order predistortion linearizer using intermodulation distortion(IMD) generator for cancellation the third and the fifth IMD of power amplifier. The IMD generator for controlling the third and the fifth IMD consist of common Emitter amplifier and Schottky diode. These signals are generated by series feedback of Schottky diode to obtain the inverse AM/AM and AM/PM characteristics of power amplifier. The individual order predistorters are consisted of individual IMD generator, power splitter and combiner. The test results show that the third and the fifth IMD can be improved by a maximum 13.5 dB and 0.9 dB in case of CW 2-tone signals. Also, the Adjacent Channel Leakage Ratio(ACLR) can be improved 2.3 dB, 2.5 dB at ${\pm}0.885$ MHz, ${\pm}1.23$ MHz offset frequency for CD-MA IS-95 2FA signals.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.671-673
• /
• 1998

본 논문에서는 CMOS 2단 연산 증폭기에 존재하는 강고장을 검출하기 위한 새로운 아날로그 테스트 방법을 제안한다. 테스트 대상 회로는 테스트를 용이하도록 궤환 루프를 삽입하고 정현파 테스트 입력을 인가하여 출력단에 고장 효과를 발생시켜 고장을 검출하는 테스트 방법이다. 테스트 대상회로에 고장이 존재할 경우 출력 단에서 정현파가 아닌 DC 전압이나 왜곡 신호가 나타나 고장 검출이 용이하다. 제안된 테스트 방법은 테스트 입력 신호를 생성하기 위한 복잡한 알고리즘을 요구하지 않으므로 테스트 패턴 시간이 짧고, 비용이 절감된다. 또한 테스트를 위한 추가적인 하드웨어의 오브헤드가 적다. 본 논문에서 제안된 테스트 방법의 정당성과 효율성은 HSPICE 모의실험을 통하여 검증하였다.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.13-21
• /
• 1992

We have constructed the magneto-operational amplifier(MOP) using the advantages of Hall device and an operational amplifier. The MOP necessarily requires a high impedance circuit, a differential-to-single-ended convert-sion circuit and feedback-input-element for operational amplifier characteristics. We have presented a new differential-to-single-ended conversion operational amplifier(DSCOP) having such characteristics. We have designed the MOP using the DSCOP and Hall device and simulated its characteristics, and finally we have constructed the system with discrete elements, and measured its magnetic characteristics.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.9
• /
• pp.39-45
• /
• 2004

A design method is proposed for the sequence detection with fixed decision delay with less hardware complexity using the concept of the Voronoi diagram and its dual, the Delaunay tessellation. This detector design is based on the Fixed Delay Tree Search (FDTS) detection. The FDTS is a computationally efficient sequence detection algerian and has been shown to achieve near-optimal performance in the severe Intersymbol Interference (ISI) channels when combined with decision feedback equalization and the appropriate channel coding. In this approach, utilizing the information contained in the Voronoi diagram or equivalently the Delaunay tessellation, the relative location of the detector input sequence in the multi-dimensional Euclidean space is found without any computational redundancy, which leads to a reduced complexity implementation of the detector.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.63-75
• /
• 2010

In this paper, the equalizer techniques that is able to adopt the digital on-channel repeater for 8VSB-based DTV system has been analyzed and we propose an effective equalizer structure which can reduce the error propagation phenomenon by the feedback signal and improve the receiver performance at the same time. In order to confirm the effective cancellation of the feedback signal, the multi-level Correlation LMS scheme is proposed through the analysis of conventional basic LMS based DFE and Correlation LMS algorithm and as compared with the conventional method, we can confirm the reduction of error propagation. When performing the computer simulation, as the Brazil channel model which is very popular for DTV broadcasting system is adopted, the result is drawn by comparing and analysing the equalizer algorithm. We have examine the symbol error rate which is in the range of 15~25dB of operation receipt SNR and MSE(Mean Square Error) in the DTV broadcasting system. As a result of comparing with the existing method, the signal-noise ratio which is necessary for maintain the bit error correction ability that the means of proposal is same is reduced by about 2~5dB, and in the rate of convergence through the MSE, we found the reduction of needed time.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.332-334
• /
• 2006

In this paper, we present an equalization scheme for 8-VSB signals for the ATSC DTV system. We propose a complex feedback filter and complex feedback sample generator for DFE to equalize 8-VSB signals in order to efficiently remove multipath distortions causing leakages from the qudrature component. We show that the proposed structure outperforms the conventional DFE used for the digital VSB which uses a real-valued feedback filter with real-valued decisions.

• Electronics and Telecommunications Trends
• /
• v.16 no.1 s.67
• /
• pp.56-70
• /
• 2001

마이크로파대 이상의 높은 RF 전파는 신호레벨이 비교적 작고 간섭현상에 매우 민감한 특성을 가지고 있다. 따라서 이러한 미소한 입력전파의 수신시 수신기 전체의 감도를 높이고 잡음을 저감시킬 목적으로 사용되는 고주파 증폭기가 저잡음 증폭기이다. 본 고에서는 LNA의 기본적 특성분석과 지능형교통시스템에 응용되는 5.8GHz대 단거리전용통신용 LNA를 구현하기 위한 기본 FET 증폭기의 전기적 특성을 연구하고 직렬 궤환에 의한 최소잡음과 최소 입력 정재파비의 최적 설계 파라미터를 도출하였다.