• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1041-1050
• /
• 2011

An elasto-plastic finite element method using the theory of strain gradient plasticity is proposed to evaluate the size dependency of structural plasticity that occurs when the configuration size decreases to micron scale. For this method, we suggest a low-order plane and three-dimensional displacement-based elements, eliminating the need for a high order, many degrees of freedom, a mixed element, or super elements, which have been considered necessary in previous researches. The proposed method can be performed in the framework of nonlinear incremental analysis in which plastic strains are calculated and averaged at nodes. These strains are then interpolated and differentiated for gradient calculation. We adopted a strain-gradient-hardening constitutive equation from the Taylor dislocation model, which requires the plastic strain gradient. The developed finite elements are tested numerically on the basis of typical size-effect problems such as micro-bending, micro-torsion, and micro-voids. With respect to the strain gradient plasticity, i.e., the size effects, the results obtained by using the proposed method, which are simple in their calculation, are in good agreement with the experimental results cited in previously published papers.

• PNF and Movement
• /
• v.10 no.2
• /
• pp.9-16
• /
• 2012

본 연구는 43세 남성 환자의 관절가동술과 슬링을 이용한 유착성 관절낭염 환자의 치료사례를 조사하여 그 과정과 결과를 알아보고자 하였다. 어깨통증장애지수(shoulder pain and disability index) 측정과 어깨관절의 굽힘(flexion), 벌림(abduction), 바깥돌림(external rotation), 안쪽돌림(internal rotation)에 대한 관절가동범위를 측정하여 비교하였으며 견관절 주위에 비스테로이드 소염진통 주사 1회, 약물치료를 병행하며 주 3회 8주간 보존적인 물리치료인 온습포(hot pack)와 간섭파(ICT), 관절가동술, 그리고 슬링을 이용한 운동치료를 실시하였다. 결과는 관절가동술과 슬링운동치료의 적용이 유착성 관절낭염 환자의 통증을 줄이고 관절가동범위를 증진시키는데 효과가 있는 것으로 판단된다.

• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.327-335
• /
• 2022

This study aimed to compare functional recovery after rehabilitation exercise between isolated PCL reconstruction and combined PLC reconstruction. Patients were divided into two groups: those who had isolated PCL reconstruction (n = 16) and those who had combined PLC reconstruction (n = 16). We assessed knee joint ligament laxity, subjective questionnaires, and isokinetic muscle function before, after 12, and 24 weeks of a rehabilitation exercise program. In both groups, there were significant differences in knee joint laxity (p = 0.048), IKDC subject score (p < 0.001), Lysholm knee (p < 0.001), Tegner activity scale (p = 0.027), and isokinetic muscle deficit (p = 0.040) by estimated period. However, no significant difference between groups was observed (p > 0.05). These results suggest that rehabilitation exercise after isolated PCL and combined PLC reconstruction influenced structural, subjective, functional recovery positively.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.206-214
• /
• 2014

This study is to evaluate how different bearing surface angles of abutment screw affect the mechanical stability of the joint in the conical seal design implant system. Materials and Methods: Internal connection type regular implants, two-piece cemented type abutments and tungsten carbide/carbon-coated titanium alloy abutment screws were selected. Titanium alloy screws with conical ($45^{\circ}$) and flat ($90^{\circ}$) head designs which fit on to abutment were fabricated. The abutments were tightened to implants with 30 Ncm by digital torque gauge. The loading was applied once to the central axis of abutment. The mean axial displacement was measured using micrometer before and after the tightening and loading (n = 5). The abutment was tightened to implants with 30 Ncm and T-shape stainless steel crown was cemented. Then the change in the amount of reverse-torque was measured after the repeated loading to the central axis, and the place 5 mm away from the central axis. Compressive bending and fatigue strength were measured at the place 5 mm away from the central axis (n = 5). Results: Both groups showed the largest axial displacement when abutment screw tightening and total displacement was greater in the flat head group compared to conical head group (P < 0.05). However, there were no significant differences in reverse torque value, compressive bending and fatigue strength (P > 0.05). Conclusion: Within the limitations of this study, the abutment screw head design had no effect on two groups regarding the joint stability, however the conical head design affected the settlement of abutment resulting in the reduced total displacement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4346-4353
• /
• 2010

The purpose of this study was to estimate the cervical range of motion and the effects of massage and static stretching in their 20s of normal adult. One hundred participants(massage=50, stretching=50) with no musculoskeletal and nervous system problems volunteered for this study. Massage and static stretching were applied to sternocleidomstoid, scalenes, trapezius, semispinalis, splenius, suboccipital, multifidi and rotatores. Both groups received intervention for 3 times in a week. The time the intervention was applied was for 10minutes. Effleurage, petrissage and stripping technique was applied to massage group and static stretching technique was applied to stretching group. The cervical range of motion (CROM) instrument was used to measure eight cervical motions (suboccipital flexion, suboccipital extension, neck flexion and extension, and left and right lateral flexion, left and right rotation). As a result of making a statistical analysis of the data, the following findings were given: First, normal cervical range of motion revealed; suboccipital flexion($2.39^{\circ}$) and extension($38.36^{\circ}$), flexion($54.11^{\circ}$) and extension($69.39^{\circ}$), lateral flexion on left($43.50^{\circ}$) and right($41.28^{\circ}$), rotation on left($66.39^{\circ}$) and right($65.94^{\circ}$) in male and suboccipital flexion($5.14^{\circ}$) and extension($36.47^{\circ}$), flexion($55.92^{\circ}$) and extension($71.22^{\circ}$), lateral flexion on left($43.34^{\circ}$) and right($41.06^{\circ}$), rotation on left($69.38^{\circ}$) and right($68.63^{\circ}$) in female. Second, women had greater range of motions than men in suboccipital flexion, left and right rotation(p<0.05). Third, it showed significantly increasing cervical range of motion in all directions within groups following treatments but not between groups(p<0.05). Our results suggest that massage and static stretching are an appropriate intervention to increase cervical range of motion by muscle relaxation and stretching and may be provided a basis for future studies investigating the cervical range of motion.

• Composites Research
• /
• v.30 no.5
• /
• pp.316-322
• /
• 2017

Carbon fiber is a material with excellent mechanical, electrical and thermal properties, which is widely used as a composite material made of a polymer matrix. However, this composite material has a weak point of interlaminar delamination due to weak interfacial bond with polymer matrix compared with high strength and elasticity of carbon fiber. In order to solve this problem, it is essential to use reinforcements. Due to excellent mechanical properties, graphene have been expected to have large improvement in physical properties as a reinforcing material. However, the aggregation of graphene and the weak interfacial bonding have resulted in failure to properly implement reinforcement effect. In order to solve this problems, dispersibility will be improved. In this study, functionalization of graphene nanoplatelet was proceeded with melamine and mixed with epoxy polymer matrix. The carbon fiber reinforced polymer composites were fabricated using the prepared graphene nanoplatelet/epoxy and flexural properties and interlaminar shear strength were measured. As a result, it was confirmed that the dispersibility of graphene nanoplatelet was improved and the mechanical properties of the composite material were increased.

• Physical Therapy Korea
• /
• v.4 no.2
• /
• pp.1-9
• /
• 1997

Skeletal muscle fatigue is often associated with diminished athletic performance and inability to maintain an expected force output as a function of time. The purpose of this study was to compare the effect of duration of exercise on skeletal muscle fatigue between Weight Lifters(WL) and Non-Weight Lifters(NWL). There were twelve normal healthy adult volunteers, ranging in age from 18 to 35 years. The group consisted of six NWL and six WL. Randomized cross-over design was set up and work-rest cycle was 8 minutes work and 1 minute rest based on 15% MVC. Muscle fatigue was measured by the amount of force produced by the wrist flexor muscle and EMG amplitude over time. Repeated measures ANOVAs($2{\times}4$) were used to determine two types of subjects(WL, NWL) during four different duration of exercises(16, 32, 48, 64 minutes). The force decreased over time in NWL and WL, but there was no significant difference(F=2.83, p>0.05). However, the EMG amplitude increased in WL(0.8200) and NWL(0.6348). The WL exhibited an increase in EMG at the end of the period, especially at 48 minutes of exercises than did the NWL(F=9.58, p<.05). This suggests the WL were able to adjust to prolonged effort with adaptations in neural effect over time, resulting in higher EMG amplitude. That is, WL may be able to learn to recruit more motor units with training. It is important to the degree of neuromuscular fatigue and the time needed for recovery may differ considerably between WL and NWL, there is a need to plan proper strength training or rehabilitation protocols to match with the requirements in different characteristics of groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3902-3909
• /
• 2009

The purpose of this study was to investigate the spontaneous therapy, TENS(transcutaneous electrical nerve stimulation) and ice therapy after induction of DOMS(delayed onset muscle soreness) through application of eccentrically exercise in ralation to biceps brachii muscle of opposite-dominance. And to explain this, we analyzed VAS(visual analogue scales), peak torque, RMS(roots mean square) when exercising elbow joint. The subjects were 30 adults without any physical defect. Subjects were divided into three groups that spontaneous therapy, TENS therapy and ice therapy after DOMS induction, choosen movement could get the maximal peak torque in angular velocity of $60^{\circ}$/sec, and mearsured peak torque, RMS and VAS. 1. The VAS was significantly decreased after 3 days application of TENS than other groups(p<.05). 2. The peak torque was significantly increased after 3 days application of TENS than other groups(p<.05). 3. The RMS was significantly increased after 3 days application of TENS than other groups(p<.05). This study showed that TENS therapy application were effective treatment strategy on DOMS than spontaneous therapy and ice therapy. Therefore, it could be considered as a treatment method in the patients with DOMS.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1093-1100
• /
• 2014

The purpose of this paper is to suggest a weight-reduction design method for the hybrid carbody of a high-speed maglev train that uses aluminum extrusion profiles and sandwich composites. A sandwich composite was used on the roof as a secondary member to minimize the weight. In order to assemble the sandwich composite roof and aluminum extrusion side frame of the carbody using welding, a guide aluminum frame located at the four sides of the sandwich composite roof was introduced in this study. The clamping force of this guide aluminum frame was verified by three-point bending test. The structural integrity and crashworthiness of the hybrid carbody of a high-speed maglev train were evaluated and verified according to the Korean Railway Safety Law using a commercial finite element analysis program. The results showed that the hybrid carbody composed of aluminum extrusion frames and a sandwich composite roof was lighter in weight than a carbody made only of aluminum extrusion profiles and had better structural performance.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.529-535
• /
• 2011

In this study, evaluation of acoustic emission signals characteristics for the post weld heat treated (PWHT) multi-pass weldment and weldment was dealt. Charpy standard specimens were taken from the lowest, middle and highest regions of the weld block. Pre-crack was made using the repeated load. Four point bend and AE tests were conducted simultaneously. Regardless of the specimens, AE signals were absent within elastic region and produced in the process of plastic deformation. AE signals for all specimens were not emitted after the maximum load. Value of signal strength for the all PWHT specimens was lower than that of the weldment. Besides, relations of plastic deformation zone size and accumulated AE counts for the PWHT specimens were more simple compared with the weldment. In case of the PWHT specimen, particles on the fractured surface decreased prominently compared with the weldment due.to PWHT. From these results, it can be concluded that PWHT was effective in reducing the AE sources for the weldment.