• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.353-355
• /
• 2022

본 논문에서는 외력에 의해 헤어가 움직일 때, 전체가 아닌 변형률이 큰 부분에 입자 제어점을 추가하여 베지에 곡선을 그리는 적응형 헤어 시뮬레이션 기법을 제안한다. 일반적인 정규화 샘플링을 통한 물리 시뮬레이션은 헤어의 움직임에 대한 정확도가 높은 반면, 계산량이 증가하고 메모리를 많이 차지하기 때문에 비효율적이다. 이 문제는 굽힘이 일어나는 특정 부분만 활용한 적응형 샘플링을 통해 해결할 수 있으며, 메모리뿐만 아니라 속도 측면에서도 모두 우수한 성능을 보인다. 본 논문에서 제안하는 방법을 이용한 굽힘 샘플링 기법은 헤어의 굽힘 패턴에 따라 실시간으로 표현되며 자연스럽고 부드러운 실제 헤어와 유사한 결과를 보여준다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.911-920
• /
• 1989

It this study, beam-type bend specimen is used to evaluate the interlaminar fracture toughness of laminated composite under mixed-mode deformations. The specimen is loaded under three-point bending and hence produced mixed-mode deformations in the vicinity of the crack tip according to the variation of the thickness ratio on delamination plane. Total energy release rate is obtained by elementary beam theory considering the effect of shear deformation. The partitioning of total value into mode-I and mode-II components is also performed. The mixed-mode interlaminar fracture toughness is evaluated by experiments on specimens with several thickness ratios of delamination plane. As the part of delamination plane is thicker, the effect of shear deformation on total energy release rate is increased. Beam-type bend specimen men may be applied to obtain informations on the mixed-mode interlaminar fracture behavior of laminated composites.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.3
• /
• pp.22-34
• /
• 1996

Regarding the plate bending process by line heating method, in this study a simplified numerical analysis is performed for a beam model to predict its residual deformation and stress distribution. Using the modified strip theory and beam finite element method, a PC-based simulation program is developed for a thermo-elastic-plastic beam. The plate bending problem can be approximately replaced by a beam model using distributed springs to account for the effect of adjacent strips. The spring constants are chosen as the best fit with experiments. In this paper, it is assumed that the temperature distribution is already given and the temperature-dependent material properties are considered. To verify the simulation program, the results using present numerical algorithm are compared with other published experimental results and similar numerical studies. The comparison shows good agreement. The present PC-based computer program also shows good efficiency in computing time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.251-258
• /
• 2014

Sunroof tracks are manufactured by press-forming extruded aluminum sheets. During press forming, cracking occurs along the sharply bent edge. The final positions of the punch and die were measured on the section, and their relation to cracking was investigated. Finite element simulation of bending to the final position was done to find the critical strains. Three-point bending tests with different material orientations, hardnesses, bending edge lengths, and bending radii were carried out in the laboratory, and finite element simulation of the three-point bending tests was performed to find the critical strains.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.341-346
• /
• 2010

The effect of specimen geometry on the bending and tensile strengths of dissimilar joints ($\beta-Si_3N_4/S45C$) with copper interlayers was evaluated. The average bending strength of specimens with circular cross sections was higher than that of specimens with rectangular cross sections. The crack initiation stress ($\sigma_i$) was successfully determined by the acoustic emission (AE) method and was approximately 60~80% of the bending strength. The residual stresses near the interfaces on the ceramic side were measured by X-ray diffraction before conducting the bending test. The bending strength and the crack initiation stress decreased with an increase in the residual stresses. The effect of the bending strain component was evaluated by the tensile testing; the tensile strength decreased with an increase in the bending strain component and was approximately 80% of the bending strength.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.79-84
• /
• 2016

A flexible electronic device deformed by external force causes the failure of a semiconductor die. Even without failure, the repeated elastic deformation changes carrier mobility in the channel and increases resistivity in the interconnection, which causes malfunction of the integrated circuits. Therefore it is desirable that a semiconductor die be placed on a neutral line where the mechanical stress is zero. In the present study, we investigated the effects of design factors on the position of neutral line by finite element analysis (FEA), and expected the possible failure behavior in a flexible face-down packaging system assuming flip-chip bonding of a silicon die. The thickness and material of the flexible substrate and the thickness of a silicon die were considered as design factors. The thickness of a flexible substrate was the most important factor for controlling the position of the neutral line. A three-dimensional FEA result showed that the von Mises stress higher than yield stress would be applied to copper bumps between a silicon die and a flexible substrate. Finally, we suggested a designing strategy for reducing the stress of a silicon die and copper bumps of a flexible face-down packaging system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04b
• /
• pp.449-453
• /
• 1994

공작기계의 가공정밀도는 공구와 공작물간의 상대변위 크기로서 평가되는데, 이 상대변위는 가공중에 발생 하는 절삭력이 공구-척-주축-기계구조물-안내면-가공테이블-공작물로 이어지는 하중전달 폐곡선을 흐르면서 경로상의 정적, 동적 취약부의 주된 영향을 받아 생기거나 각 요소부품의 변형이 누적되어 생겨난다. 본 연구에서는 주축의 취약부를 규명하기 위하여 정적으로는 정적 처짐곡선을 이용하고, 동적으로는 진동모우드의 굽힘곡선을 이용하여 주축선단의 처짐에 가장 영향을 많이주는 부위를 파악하였다. 취약부의 개선방법으로는 주축지름을 변화시켜 주축선단 근처에서 굽힘이 집중되지 않도록 유도하였다. 그리고 구조개선의 효과를 확인 하기 위해서 기존 주축시스템과 개선 주축시스템의 정적, 동적 특성변화를 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1441_1441
• /
• 2009

This paper describes performance of sealing integrity and bending strain of HV polymeric bushing with thermal mechanical test. Generally the properties of FRP tube can be influenced by the winding angle, wall thickness and winding tension. As a results, multi winding bushing shows that it has max deflection in the range of 16.5~16.9 mm.

• Composites Research
• /
• v.12 no.3
• /
• pp.66-74
• /
• 1999

A modified mixed mode bending test was performed to investigate the mixed mode delamination for carbon/epoxy composite material. Various mixed mode ratios could be produced by changing the applied load position on the loading lever and the bending load position on the specimen. The modified mixed mode bending test was analyzed to obtain strain energy release rates using beam theory, compliance method and finite element method, This results were in good agreement with the experimental result, which confirmed the validity of this test.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.257-266
• /
• 1993

Computer Simulation based of divided element method was done to predict strip shape in20-high Sendzimir Mill and has been used to find a way for preventing quarter waves occurring in the wide and thin gaged strip rolling. The simulation showed that it was difficult to prevent quarter waves by the existing methods of controlling actuators such as the shifting of the first intermediate roll and the profile control of As-U-Roll in back up roll. It was, however, confirmed analytically and experimentally that quarter waves could be effectively reduce by changing taper mode at the barrel-end taper radius of the first intermediate roll.