• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.108-109
• /
• 2005

The aim of Port State Control(PSC) system is recognized as a proficient mechanism in preventing coastal traffic accident and protecting marine environment. Recently, PSC system is focused on human factor of International Maritime Convention, especially ILO and STCW Convention by considering many accidents resulted from human factor. Therefore, we have to understand of Consolidated Maritime Labour Convention which describes employment conditions and social welfare policy, the rights about the lowest wages, the overdue wages, the unemployment protection. a disaster reward, etc and STCW Convention which describes standards of training, certification and watchkeeping for seafarers. The aim of this study is to recognize inspection points about human factor of these Conventions. .

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.227-234
• /
• 2005

It is said the maritime labour law that total legislation system regulate all relationship concerning a labour of seafarers. A possibility of danger, a helplessness from the shore, a importance of the responsibility, a segregation from the public, etc. is mentioned as the particularity of a maritime labour which is distinguished from that of a shore labour. Therefore, the improvement of social standing and protection of rights for seafarers may be achieved substantially by the maritime labour standards considering such particularity of maritime labour. A vessel is itself international relationship, accordingly maritime labour is also same. It means that international relationship should be considered, whenever any country makes it's national law for maritime labour. Therefore, this paper aims to find out the spirit of legislation for the maritime labour law through a historical study on the development of it, and suggest the facts that should be considered for legislation of domestic law concerned.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.700-707
• /
• 2005

The human being continued the processing of improvement for well being life according to scientific results The other hand, All the seaman life take the rest and sleep in ship's office and living room. In this case, many crew took the pain of back spain or deposit the his fatigue, This will be decrease the productivity owing to crew's back spain or fatigue etc. In this study researched the problem of ship's bed mattress and the principle of Well being air mattress in technical standard etc. Specially decreased some kinds of bacillus, germ and many kinds of bacteria by using of tourmaline which emitted the far red light and negative ion from surface of the mattress. We developed and applied the ship's Well being air mattress to off shore and various kind of ship by International Labour Organization convention 192.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.102-105
• /
• 2005

Between 1920 and 1996, a total of 39 Conventions, 29 Recommendations and one Protocol were adopted by the International Labour conference. But Many ILO Instruments were outdated, deficient and not reflective of modern practice, many contained technical detail which discouraged ratification and were thus ineffective. However, many issues which had become relevant were not covered by existing instruments. Therefore, the Governing Body of ILO, at its 262nd Session(March-April 1995), decided to set up a Working Party on Policy regarding the Revision of Standards. It was decided that the Working Party would examine the need for revision of all maritime Conventions and Recommendations adopted before 1985 with a view to rejuvenating and strengthening the standard-setting system. The Working Party initiated its examination of maritime instruments during 273rd Session(November 1998) of the Governing Body. The review made by the Working Party has concluded that of the maritime Conventions examined, seven of them are obsolete and should be revised, 13 should be denounced and six were considered either up to date or were identified for promotion, most of which were approved by the Governing Body. The consolidated maritime labour convention will be adopted in February 2006.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1191-1200
• /
• 2022

The COVID-19 pandemic can be deemed one of the greatest hardships faced by mankind in the 21st century. All industries have been severely affected and workers are still experiencing deep difficulties due to the changed working and living environment. Seafarers have been recognized by the international community as key workers since the pandemic began. They are also working internationally to establish a Level Playing Field through the protection of their rights through the Seafarers' Employment Agreement and the implementation of international labour standards. However, despite the obligations under international conventions to be implemented by State parties and the recommendations by international organizations, the rights of seafarers under the Maritime Labour Convention were violated were violated and their occupational safety and health of seafarers were further threatened throughout the pandemic. This article analyzes the impact of the international shipping industry and the implementation of the Maritime Labour Convention based on each country's measures during the COVID-19 pandemic. Furthermore, the amendments of the Maritime Labour Convention adopted through the fourth Special Tripartite Committee were analyzed based on the conference documents and reports to comprehend the implied meaning. The adopted eight amendments to the Maritime Labour Convention are expected to positively affect the seafarers' rights, safety and health in the future, but the international community's efforts should continue because the issues of maximum working hours, maximum service period on board, and the repatriation of seafarers still remain unsettled.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.1-9
• /
• 2022

The causes of accidents occurring in chemical plants vary, but 96% of industrial accidents occurring worldwide are caused by workers' unsafe behavior. The International Labour Organization (ILO) has announced 20 elements of workers' anxiety-warning behaviors that occur on multiple occasions at industrial sites in order to warn them of the risk of accidents caused by workers' anxiety-driven behavior, and to prevent industrial accidents, workers' anxiety-driven behavior should be controlled under stress In this study, major types of unsafe behavior were analyzed on the basis of information on the accident investigation history of domestic workspaces in order to find out how workers can manage their unsafe behavior. Based on the results of the analysis of the major anxiety war behavior, the root cause of causing anxiety war behavior was analyzed using the Swiss Cheese Model, and each root cause management method was proposed.

• Journal of Korean Society of societal Security
• /
• v.2 no.2
• /
• pp.49-54
• /
• 2009

High incident of accidents in construction jobsite became a social problem. According to the International Labour Organization (ILO), more than 60,000 fatal accidents occur each year in construction workplace worldwide. This number of accidents accounts for about 17 percent of all fatal workplace accidents. Especially, accidents from struck-by and falls comprise of over 60 percent of construction fatalities. This paper introduces a prototype of a received signal strength index (RSSI)-based safety monitoring to mitigate the potential accidents caused by falls and struck-by. Correlation between signal strength and noise index is examined to create the distance profile between a transmitter and a receiver. Throughout the distributed sensor nodes attached on potential hazardous objects, the proposed prototype envisions that construction workers with a tracker-tag can identify and monitor their current working environment in construction workplace, and early warning system can reduce the incidents of fatal accident in construction job site.

• Journal of radiological science and technology
• /
• v.34 no.4
• /
• pp.305-314
• /
• 2011

The purpose of this study was to compare the findings on the chest low-dose CT (LDCT) images between the negative and positive groups for pneumoconiosis in the group exposed to inorganic dust. From May 30, 2007 to August 31, 2008, total 328 subjects were examined by a LDCT. LDCT images were read by a chest radiologist who has much experience for reading of pneumoconiosis. All subjects were classified into two groups based on digital images after consensus reading of two radiologists according to the ILO 2000 guidelines; negative group (87, 26.5%) without pneumoconiosis and positive group (241, 73.5%). Statistical analysis was performed using a SPSS 14.0. There were significant differences in age (60.9 vs. 65.0, p<0.001), and in dust expose duration (17.0 vs. 19.2, p=0.024) between two groups, but no significant difference in smoking (p=0.784). Of the 328 subjects, 13 diagnosis were extracted from 245 subjects (74.7%). Coronary artery calcification (CAC) was significantly higher in positive group than that in negative group (36.9% vs. 25.3%, p=0.049). Honeycombing showed higher frequency in positive group than in negative group (6.2% vs. 1.2%, p=0.079). Pneumoconiosis findings caused by inorganic dusts exposure showed the significant relation with CAC on LDCT images. Future studies need to prove that pneumoconiosis finding is independent risk factor for CAC using a coronary artery angiography.

• The KIPS Transactions:PartD
• /
• v.16D no.6
• /
• pp.851-858
• /
• 2009

Mobbing is not restricted to problem of young people but the bigger recent problem occurs in workspaces. According to reports of ILO and domestic case mobbing in the workplace is increasing more and more numerically from 9.1%('03) to 30.7%('08). These mobbing brings personal and social losses. The proposed algorithm makes it possible to grasp not only current mobbing victims but also potential mobbing victims through user profile and contribute to efficient personnel management. This paper extracts user profile related to mobbing, in a way of selecting seven factors and fifty attributes that are related to this matter. Next, expressing extracting factors as '1' if they are related me or not '0'. And apply similarity function to attributes summation included in factors to calculate similarity between the users. Third, calculate optimizing weight choosing factors included attributes by applying neural network algorithm of SPSS Clementine and through this summation Mobbing-Value(MV) can be calculated . Finally by mapping MV of online social network users to G2 mobbing propensity classification model(4 Groups; Ideal Group of the online social network, Bullies, Aggressive victims, Victims) which is designed in this paper, can grasp mobbing propensity of users, which will contribute to efficient personnel management.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.3-14
• /
• 1993

손목관증후군(CTS)이란 장기간에 걸쳐 여러가지 의학적, 생리학적, 직업적 요인들에 기인 하여 발생하는 누적외상병(Cumulative Trauma Disorders: CTD)의 대표적인 한 형태이다. 이 증 후근은 1960년에 국제노동기구(ILO)에 의해 직업병으로 인정되었으며 미국을 비롯한 구미각국에 서는 산업체에서 발생하는 작업손실시간및 산업재해보상으로 인한 경비손실에 중요한 요인의 하 나로 규정되어 이에 대한 예방책의 연구가 정부기관, 대학, 연구소, 그리고 산업체를 중심으로 활 발히 이루어지고 있으나, 우리나라에서는 아직 이에 대한 인식및 예방책에 관한 연구가 미흡한 실정이다. 본 논문에서는 직업적 요인을 중심으로 손목관증후군(CTS)의 발병가능성이 높은 직업 및 그 작업조건들을 고찰하고 이의 예방을 위한 연구방안을 다음과 같이 모색하였다. 첫째, 손목 관증후군에 관련된 문헌조사를 통하여 어떠한 직업들이 보다 높은 발병위험에 직면하고 있으며 어 떤 작업조건및 환경적 요인들이 손목관증후군(CTS)을 발병시킬수 있는가에 대하여 고찰하였다. 둘째, 미국등의 대학및 연구소에서 여러가지 작업조건들을 통제한 실험을 통하여 얻어진 이 증후군 의 발병율을 감소시키기 위한 여러가지 안전한 작업기준들을 검토하고 정부기관(NIOSH, OSHA)의 정책방향을 검토하였다. 세째, 미국의 연구소및 경영자문회사등에서 산업체를 대상으로 시행하고 종합적인 누적외상병(CTD)의 예방프로그램을 검토하였다. 마지막으로, 현재 우리나라의 손목관증 후군(CTS)을 중심으로한 누적외상병의 현실을 검토하고 앞으로의 예방을 위한 연구방향및 방법과 정책적 대응방안등에 대하여 연구검토하였다. 결론을 제시하고자 한다.기서 사용된 아이콘에 대해서만 타당한 것으로 이것을 모든 아이콘에 대해 일반화시키기는 어려우나 이후에 행해질 Icon-based User Interface 분야의 많은 연구들의 기초가 될 것이다. 더불어 아이콘과 관련된 많은 요인들(문화적 영향, 아이콘 색깔, 크기, 아이콘의 위치등이 인식에 미치는 영향)에 대해서도 연구가 행해져야 할 것이다. 확인하고 각각의 기능을 분명히 했다.가 수월하게 하였고 메모리를 동적으로 관리할 수 있게 하였다. 또한 기존의 smpl에 디버깅용 함수 및 설비(facility) 제어용 함수를 추가하여 시뮬레이션 프로그램 작성을 용이하게 하였다. 예를 들면 who_server(), who_queue(), pop_Q(), push_Q(), pop_server(), push_server(), we(), wf(), printfct() 같은 함수들이다. 또한 동시에 발생되는 사건들의 순서를 조종하기 위해, 동시에 발생할 수 있는 각각의 사건에 우선순위를 두어 이 우선 순위에 의하여 사건 리스트(event list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation ener