• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1431-1438
• /
• 2015

According to the report from OECD, 80% of world trade quantity was influenced by standard, 50% of EU trade demand certification of forced standard. This leads to develop standard connected with R&D in most country and company worldwide. Recently, Technical standards have advantage of reduction of production cost and market dominating power. Standardization of construction technology has very important role that ouput of R&D refer to KS, national construction standards and it activates in the market. However, domestic construction research related to effectiveness of standadization fall short of expectation in comparison with manufacturing industry. This study present criteria that can analyze the performance and effectiveness in construction R&D project connected with standardization. And it applied domestic R&D cases (finished from 2000 to 2009), analyzes ouput of standadization and economic effect to verify the value of construcion technology standardization.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.2
• /
• pp.421-447
• /
• 2014

Traditional medicine has been integrated into the national health system in many countries such as Korea, China, Taiwan, etc. Korea and China are most representative among them. The purpose of this study is to compare the policies on traditional medicine in Korea and China focusing on where it came from and where it is headed. In this regard, the study suggested the first analysis tool in the world for analyzing the policy of traditional medicine. The results of the study are as follows: First of all, the development process of Korean Medicine (KM) and Traditional Chinese Medicine (TCM) shows the same pattern, that is, both are influenced by its own national policies. Secondly, the difference between the two countries is due to the gap in the development status or the different aspects in national heath system. TCM is more vitalized in health system and has larger category, and stays ahead in globalization compared to KM. TCM covers Chinese medicine, integrative medicine and ethno-medicine. Korea emphasizes the role of KM in the declining birthrate and aging society, and promotes the overseas patient invitation strategy. China, on the other hand, establishes the medical system for emergency medical treatment and preventive treatment of major diseases and promotes overseas expansion of TCM service. In addition, Korea stressed the safety and distribution of herbal medicine, and China emphasizes production technologies. Korea has a strong medical device industry along with the government's fostering policy; however, in China, medical devices are in the R&D stage yet. Even though both countries promotes the drug development from natural products, Korea focuses on developing herbal cosmetics in application industry, but China shows weakness in policies on application industry. China shores up the foundation for culture and theory of traditional medicine, while Korea doesn't have related policy. Korea places emphasis on promoting collaboration with international organizations and medical volunteer programs, whereas China is more interested in mutual cooperation and real trade with other countries.

• Journal of Legislation Research
• /
• no.53
• /
• pp.213-267
• /
• 2017

Regulatory barrier is considered most challenging out of all FinTech barriers, which many technology innovators have always experienced. Even though technological solutions promise customers accessibility to more cost-effective and secured financial services, it is quite challenging to create regulatory environment that enables innovation FinTech industry. Especially, a common challenge FinTech innovators and business face is regulatory uncertainty and confusion rather than any particular regulation. Since many FinTech models are continuously introducing new innovative ways in providing financial services, significant confusion could be raised in applying principles of existing law and regulations. In addition, it is uncertain whether or not applying complex regulatory compliance model intended for large financial institutions to small start-ups is appropriate since most existing regulations and rules are established and introduced without considering innovative tools such as mobile instruments, e-trade, and internet. Therefore, new mechanism to access to regulatory information in a more cost-effective, quick and immediate way should be created. Regulators, technological innovators, and financial customers should cooperate each other to find out appropriate solutions for those issues. Many regulators are introducing regulatory sandbox which provides service providers with opportunities to test their innovations, during the test, providing regulators with enough time to understand risks of innovations. However, regulatory sandbox is not a panacea for all challenges to FinTech innovations. Therefore, regulators should make comprehensive and multidimensional efforts including regulatory sandbox in supporting FinTech ecosystem.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.568-585
• /
• 2022

In the present study, we proposed a numerical method for simulating thermally induced fracture slip using a grain-based distinct element model (GBDEM). As a part of DECOVALEX-2023, the thermo-mechanical loading test on a saw-cut rock fracture conducted at the Korea Institute of Civil Engineering and Building Technology was simulated. In the numerical model, the rock sample including a saw-cut fracture was represented as a group of random Voronoi polyhedra. Then, the coupled thermo-mechanical behavior of grains and their interfaces was calculated using 3DEC. The key concerns focused on the temperature evolution, thermally induced principal stress increment, and fracture normal and shear displacements under thermo-mechanical loading. The comparisons between laboratory experimental results and the numerical results revealed that the numerical model reasonably captured the heat transfer and heat loss characteristics of the rock specimen, the horizontal stress increment due to constrained displacement, and the progressive shear failure of the fracture. However, the onset of the fracture slip and the magnitudes of stress increment and fracture displacement showed discrepancies between the numerical and experimental results. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.365-370
• /
• 2023

Royalty contributed to the development of the non-fungible token (NFT) ecosystem as a reward system that pays a portion of the sales to the creator whenever transactions occur. This study quantitatively analyzes the impact of the abolition of royalties, which is being expanded by some NFT marketplaces, on the NFT market, and qualitatively analyzes the results of the impact. The analysis results are as follows. First, the number of NFT mints is decreasing by causing creators to leave the NFT market and reducing new entry. Second, major NFT projects have refused to trade with marketplaces that have abolished royalties, leading to a decrease in the number of transactions. Third, the abolition of royalties has undermined the motivation of NFT creators to continue to develop their projects, leading to a drop in NFT floor prices. This study is expected to contribute to reducing the current negative impact in the short term by suggesting how the NFT community provides incentives to owners who voluntarily pay royalties independently of the policy of the NFT marketplace. In addition, it suggests that in the long run, fundamental solutions to the problem of abolishing royalties require improvements in technology related to royalty payments, cooperation between NFT marketplaces and NFT creators, and institutional support related to royalties.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.301-307
• /
• 2023

Deep learning requires building a deep neural network, collecting a large amount of training data, and then training the built neural network for a long time. If training does not proceed properly or overfitting occurs, training will fail. When using deep learning tools that have been developed so far, it takes a lot of time to collect training data and learn. However, due to the rapid advent of the mobile environment and the increase in sensor data, the demand for real-time deep learning technology that can dramatically reduce the time required for neural network learning is rapidly increasing. In this study, a real-time deep learning system was implemented using an Arduino system equipped with a fine dust sensor. In the implemented system, fine dust data is measured every 30 seconds, and when up to 120 are accumulated, learning is performed using the previously accumulated data and the newly accumulated data as a dataset. The neural network for learning was composed of one input layer, one hidden layer, and one output. To evaluate the performance of the implemented system, learning time and root mean square error (RMSE) were measured. As a result of the experiment, the average learning error was 0.04053796, and the average learning time of one epoch was about 3,447 seconds.

• Journal of Korean Society of Forest Science
• /
• v.107 no.1
• /
• pp.96-107
• /
• 2018

This study analyzed the linkage between the Forestry sector Official Development Assistance (ODA) Project in South Korea and the Sustainable Development Goals (SDGs) of United Nations (UN), Suggested direction of ODA project focusing on the implementation of the SDGs. Forestry sector ODA project data in South Korea have collected from Economic Development Cooperation Fund (EDCF) statistical inquiry system developed by The Export-Import Bank of Korea. According to the analysis result, Forestry sector ODA project in South Korea have been actively implemented in the fields of forestry development, forestry policy and administration. In both fields, Korea Forest Service and Korea International Cooperation Agency (KOICA) carried out the most projects. The Forestry sector ODA project data in South Korea are classified technical development, capacity building, construction of infrastructure and afforestation based on their objectives and contents. SDGs emphasizes the importance of national implementation assessment and this study analyze linkage between ODA activity content in each classification item and 2016 Korea Forest Service Performance Management Plan indicator. Analyzed the 2016 Korea Forest Service Performance Management Plan indicator and SDGs target and SDGs indicator were identified. finally, SDGs goals were recognized. In conclusion, Forestry sector ODA project in South Korea are associated with the SDGs Goal 1 (No Poverty), Goal 2 (Zero Hunger), Goal 6 (Clean Water and Sanitation), Goal 13 (Climate Action), Goal 15 (Life on Land) and Goal 17 (Partnership for The Goals). Therefore, With the launch of the SDGs, This study analyzed the linkage among the Forestry sector ODA Project in South Korea, the 2016 Korea Forest Service Performance Management Plan and the SDGs. it presented the limitations of Forestry sector ODA Project in South Korea and made proposals for the implementation of the SDGs.

• Korean Security Journal
• /
• no.52
• /
• pp.73-91
• /
• 2017

This study is based on the political and economic standpoint of each country, Use advanced equipment to prevent new terrorism from causing widespread damage, In order to establish a countermeasures against terrorism in accordance with the reality of Korea, which is effective in responding to terrorist attacks, Korea conducted a SWOT analysis of the terrorist environment and terrorist environment through specialists. First, internal strengths of Korea 's terrorist environment include stable security situation, weakness of religious and ethnic conflicts, strong regulation and control of firearms, and counter terrorism capabilities and know - how accumulated during major international events. Second, the internal weaknesses of the terrorist environment in Korea include the insecurity of the people, the instability caused by the military confrontation with North Korea, the absence of anti-terrorism law system, the difficulty of terrorism control and management by the development of the Internet and IT technology. Third, the external opportunities for Korea 's terrorist environment are as follows: ease of supplementation and learning through cases of foreign terrorism failure, ease of increase of terrorist budget and support with higher terrorism issues, strengthening of counterterrorism through military cooperation with allied nationsRespectively. Fourth, the external threats to the terrorist environment in Korea are the increase of social dissatisfaction due to the continuous influx of defectors and foreign workers, the goal of terrorism from international terrorist organizations through alliance with the United States,Increased frequency of incidents, and increased IS coverage of terrorism around the world. In addition, the SWOT in - depth interviews on the terrorist environment of the expert group were conducted to diagnose and analyze the problems, terrorism awareness and legal system in the Korean terror environment. The results of the study are summarized as follows.First, the basic law on terrorism should be enacted.Second, the establishment of an integrated anti-terrorism organization.Third, securing and nurturing specialized personnel in response to terrorism.

• Proceedings of the CALSEC Conference
• /
• 1998.10b
• /
• pp.585-594
• /
• 1998

이미 전자상거래(EC)가 시간적ㆍ공간적 제약을 극복하고 국경을 초월한 새로운 교역시장 (Cyber Market)으로 등장하고 있으며 세계 자동차 산업은 표준부품의 공동개발 및 조달을 통해 중복투자 방지, 신차개발기간 단축 등 전략적 제휴를 통한 공조ㆍ공생체계 구축을 경쟁적으로 추진하고 있으나 국내 자동차업계는 제품개발, 부품조달, 판매 및 A/S 등 모든 부문을 독자적으로 해결함으로써 경쟁력 제고에 역행하는 경향이 있다. 또한 자동차 선진국과는 달리 국제 경쟁력 강화를 위한 CALS/EC 정보 기반 기술의 실질적인 활용이 미흡한 실정이다. 이러한 현실을 개선하기 위해 최근에 자동차공업협회(KAMA)와 현대, 대우, 기아 자동차 3사는 자동차 산업 CALS 추진 모델(Autopia)의 구축을 추진하고 있다. 추진 내용은 자동차 산업의 전체 Life-Cycle인 제품기획 단계부터 설계, 생산, 구매/조달, 고객지원 단계등 전 분야를 3개 부문(신차개발 프로세스, 구매조달 프로세스, 고객지원 서비스)으로 구분되어 있다. 신차개발 프로세스 부문은 차세대 PDM을 통하여 제품개발 사이클 단축을 추구하며 STEP을 통한 범용적 설계정보 교환 체계 구현이 기반이 된다. 또한 업무 흐름의 불투명성으로 인한 업무의 불균형 현상 타파와 설계 변경의 효율적 대응을 위하여 Workflow Management가 동시공학에 바탕을 두고 도입 적용되어야 한다. CAD 데이터를 비롯한 방대한 데이터의 효율적 관리를 위해서는 각 프로세스별로 독립된 정보를 체계적으로 관리할 수 있는 통합 환경(Integrated Data Environment)을 구성하여 각 프로세스에 걸쳐 데이터의 처리효율을 증대하여야 한다. 신차개발 부문의 핵심 기술이면서도 현업 적용이 초기 단계인 Digital Mockup과 Virtual Reality의 적용을 위해서는 3D 모델링이 기본 설계 방법으로 적용되어야 하며 이를 통한 어셈블리 및 부품구조의 관리가 이루어져야 한다. 구매조달 프로세스 부문은 자동차 업계의 공통 EDI/EC 네트워크 구축을 통한 경제적인 인프라 구조와 함께 부품 조달 체계의 간소화를 추구함으로써 자동차 산업의 대외 경쟁력 강화가 이루어 질 수 있다. 공개구매 시스템의 구축을 통하여 완성차별로 전속 계열화된 수직적인 부품조달 체계와 업체간 정보공유의 폐쇄성을 제거할 수 있고 완전 경쟁에 의한 우량 협력업체 발굴 기회의 확대가 용이하다. 이를 통하여 궁극적으로는 Global Vendor망의 구축이 실현될 것이다. 종합물류 시스템이 구현되면 판매는 경쟁체제, 물류는 공동화가 됨으로써 국가적으로 물류 비용의 절감이 엄청날 것으로 예상된다. 전국에 산재되어 있는 1,000여개의 대리점과 7,000여개의 정비업소를 대상으로 한 정비부품 EDI/EC 시스템이 구축되면 고객 서비스의 효율 향상과 함께 정비업소의 물류 및 재고 비용의 감소, 조달 속도의 향상, 조달 업무의 간소화 등의 효과를 보게 될 것이다. 고객지원 서비스는 정비정보 시스템, 산업정보 시스템, 쇼핑몰 시스템, 등록대행 시스템등을 통하여 일반 국민들이 피부로 느낄 수 있는 시스템으로 구축 되어야 할 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1342-1354
• /
• 2016

As Internet, and hardware technology are in rapid process, using rate and penetration rate of Internet of Things are increasing. Internet of Things is the physical objects with network which embedded with electronics, software, sensors, and network. Smart Home-kit to operate refrigerators, washing machines, light bulbs, and such internet of things by a smartphone has been realized. However, it is difficult to use a good quality of software based on IoT. It is because that the study related to quality evaluation of software based on IoT is deficient compared with increase amount of IoT devices. Software based on IoT includes mobility, transportability, real time accessibility and hardware characteristics. Therefore, it is necessary to have differentiated quality standards and quality model. Software quality evaluation model for IoT is proposed to satisfy these needs. Evaluation model is mapped by characteristics of IoT software based on ISO/IEC 25000's quality characteristics. Scenario based studies were applied to quality model for verification.